References
- K. Park, S. Choi, S. J. Lee, Y. S. Kim, 2008, Injection molding for a ultra thin-wall part using induction heating, Trans. J. Kor. Soc. Mech. Eng. (A), Vol. 32, pp. 481-487. https://doi.org/10.3795/KSME-A.2008.32.6.481
- S. C. Chen, W. R. Jong, Y. J. Chang, J. A, Chang, J. C. Cin, 2006, Rapid mold temperature variation for assisting the micro injection of high aspect ratio micro-feature parts using induction heating technology, J. Micromech, Microeng., Vol. 16, pp. 1783-1791. https://doi.org/10.1088/0960-1317/16/9/005
- S. Kim, C. S. Shiau, B. Kim, D. Yao, 2007, Injection molding nanoscale features with the aid of induction heating, Polym. Plast. Technol. Eng., Vol. 46, 1031-1037. https://doi.org/10.1080/03602550701522344
- S. C. Chen, W. R. Jong, J. A, Chang, 2006, Dynamic mold surface temperature control using induction heating and its effects on the surface appearance on weld line, J. Appl. Polym. Sci., Vol. 101, pp. 1174-1180. https://doi.org/10.1002/app.24070
- K. Park, D. H. Sohn, K. H. Cho, 2010, Eliminating weldlines of an injection molded part with the aid of high-frequency induction heating, J. Mech. Sci. Technol., Vol. 24, pp. 149-152. https://doi.org/10.1007/s12206-009-1127-4
- K. Park, Y. S. Kim, 2009, Effect of mold temperature on mechanical properties of an injection-molded part with microfeatures, J. Polym. Eng., Vol. 29, pp. 135-154. https://doi.org/10.1515/POLYENG.2009.29.1-3.135
- S. C. Chen, H. S. Peng, J. A. Chang, W. R. Jong, 2004, Simulations and verifications of induction heating on a mold plate, Int. Comm. Heat Mass Transfer, Vol. 31, pp. 971-980. https://doi.org/10.1016/j.icheatmasstransfer.2004.05.007
- K. Park, J. J. Hwang, O. K. Kwon, J. H. Yun, 2007, Finite element analysis of induction heating proces for development of rapid mold heating system, Trans. Mater. Proc. Vol. 16, pp. 113-119. https://doi.org/10.5228/KSPP.2007.16.2.113
- H. Eom, K. Park, 2009, Fully-coupled numerical analysis of high-frequency induction heating for thin-wall injection molding, Polym. Plast. Technol. Eng., Vol. 48, 1070-1077. https://doi.org/10.1080/03602550802539544
Cited by
- Investigation into Heat Transfer Characteristics of an Injection Mold by Considering Thermal Contact Resistance vol.20, pp.1, 2011, https://doi.org/10.5228/KSTP.2011.20.1.29
- Study on Hardening Depth by Induction Hardening Analysis of Sprocket Using FEA and Experiment Results vol.33, pp.5, 2016, https://doi.org/10.7736/KSPE.2016.33.5.393
- An Optimal Frequency Condition for An Induction Hardening for An Axle Shaft using Thermal-Electromagnetic Coupled Analysis vol.40, pp.2, 2016, https://doi.org/10.3795/KSME-A.2016.40.2.207
- Effect of Material Flow Direction on the Replication Characteristics of the Ultrasonic Patterning Process vol.21, pp.2, 2012, https://doi.org/10.5228/KSTP.2012.21.2.119