References
- Y. H. Moon, Y. K. Kang, J. W. Park, S. R. Gong, 2001, Tool temperature control to increase the deep drawability of aluminium 1050 sheet, Int. J. Mach. Tools Manuf., Vol. 41, pp. 1283-1294. https://doi.org/10.1016/S0890-6955(01)00008-6
- J. Wang, A. Goel, F. Yang, J. T. Gau, 2009, Blank optimization for sheet metal forming using multistage finite element simulation, Int. J. Adv. Manuf. Technol., Vol. 40, pp. 709-720. https://doi.org/10.1007/s00170-008-1383-y
- M. A. Hassan, N. Takakura, K. Yamaguchim, 2002, Friction aided deep drawing of sheet metal using polyurethane ring and auxiliary metal punch. Part 1: experimental observations on the deep drawing of aluminium thin sheets and foils, Int. J. Mach. Tools Manuf., Vol. 42, pp. 625-631. https://doi.org/10.1016/S0890-6955(01)00145-6
- N. Kishor, D. R. Kumar, 2002, Optimization of initial blank shape to minimize earing in deep drawing using finite element method, J. Mater. Process. Technol., Vol. 130-131, pp. 20-30. https://doi.org/10.1016/S0924-0136(02)00790-2
- H. G. Kim, J. W. Bae, D. K. Choo, C. G. Kang, 2006, A study on the deep drawing of AZ31B magnesium sheet at warm and hot temperature, Trans. Mater. Process., Vol. 15, No. 7, pp. 504-511. https://doi.org/10.5228/KSPP.2006.15.7.504
- S. H. Kim, S. H. Kim, H. Huh, 2000, Multi-stage analysis of elliptic cup drawing processes with the large aspect ratio by an explicit elasto-plastic finite element method, Trans. Mater. Process., Vol. 9, No. 3, pp.313-319.
- D. L. Ko, D. W. Jung, 2009, A study on the behavior of wrinkling in the square cups deep drawing of Al alloy, Trans. KSME(A), Vol. 33, No. 3, pp. 276-281. https://doi.org/10.3795/KSME-A.2009.33.3.276
- S. H. Kim, S. H. Kim, H. Huh, 2002, Optimum tool design in a multi-stage rectangular cup drawing and ironing process with the large aspect ratio by the finite element analysis, Trans. KSME(A), Vol. 26, No. 6, pp. 1077-1084. https://doi.org/10.3795/KSME-A.2002.26.6.1077
- H. J. Kim, T. W. Ku, B. S. Kang, 2001, FE analysis and die design of the multi-stage rectangular deep drawing process with the large aspect ratio, Trans. Mater. Process., Vol. 10, No. 6, pp. 456-464.
- T. W. Ku, C. S. Park, B. S. Kang, 2004, A study on initial blank design and modification for rectangular case forming with extreme aspect ratio, Trans. Mater. Process., Vol. 13, No. 4, pp. 307-318. https://doi.org/10.5228/KSPP.2004.13.4.307
- T. W. Ku, H. Y. Kim, W. J. Song, B. S. Kang, 2008, Process design and finite element analysis of rectangular cup used for Ni-MH battery with high aspect ratio, Trans. Mater. Process., Vol. 17, No. 3, pp. 107-181. https://doi.org/10.5228/KSPP.2008.17.3.170
Cited by
- Tool Design and Numerical Verification for Thick Plate Forming of Hollow-Partitioned Steam Turbine Nozzle Stator vol.25, pp.6, 2016, https://doi.org/10.5228/KSTP.2016.25.6.379
- Numerical Analysis and Experimental Evaluation on Formability of Membrane for LNG Storage Tank vol.20, pp.6, 2011, https://doi.org/10.5228/KSTP.2011.20.6.409
- Numerical Simulation for a Multi-Stage Deep Drawing of Anisotropic SUS409L Sheet into a Rectangular Cup vol.22, pp.3, 2013, https://doi.org/10.5228/KSTP.2013.22.3.133
- Springback Minimization using Bottoming in Al Can Deep Drawing Process vol.17, pp.9, 2016, https://doi.org/10.5762/KAIS.2016.17.9.302