참고문헌
- J. H. Kim, 2004, A comparative study about the antiabrasional property of thread rolling dies of biomaterial joining method, Yeungnam University, Master’s degree thesis.
- J. P. Domblesky, F. Feng, 2002, A parametric study of process parameters in external thread rolling, J. Mater. Proc. Technol., Vol. 121, pp. 341-349. https://doi.org/10.1016/S0924-0136(01)01223-7
- Y. C. Kao, H. Y. Cheng, C. H. She, 2006, Development of an integrated CAD/CAE/CAM system on taper-tipped thread-rolling die-plates, J. Mater. Proc. Technol., Vol. 177, pp. 98-103. https://doi.org/10.1016/j.jmatprotec.2006.04.082
- Z. Pater, A. Gontaz, W. Weron-ski, 2004, New method of thred rolling, J. Mater. Proc. Technol., Vol. 153-154, pp. 722-728. https://doi.org/10.1016/j.jmatprotec.2004.04.154
- K. H. Kim, D. H. Kim, D. C. Ko, B. M. Kim, 2002, Characteristics evaluation of process parameters for improvement the precision of thread rolling in lead screw", Proc. KSPE 2002 Autumn Conf., pp. 312-315.
- www.afdex.com
- M. S. Joun, J. G. Eom, M. C. Lee, 2008, A new method for acquiring true stress-strain curves over a large of strains using a tensile test and finite element method. Mechanics of Material Vol. 40, No.7, pp. 586-593. https://doi.org/10.1016/j.mechmat.2007.11.006
- M. S. Joun, J. G. Eom., M. C. Lee, J. H. Park, 2008, Tensile test based material identification program AFDEX/MAT and its application to two new preheat treated steels and a conventional CR-MO steel. International Journal of Modern Physics B, Vol. 22, pp. 5774-5779. https://doi.org/10.1142/S0217979208051157
피인용 문헌
- A forging die design to improve the flower shape of flange bolt vol.40, pp.4, 2016, https://doi.org/10.5916/jkosme.2016.40.4.314
- Design of eccentric forging process for camber bolts using finite element method vol.40, pp.4, 2016, https://doi.org/10.5916/jkosme.2016.40.4.320
- Design of a Hinge Bracket Forming Process Using Thick Plate vol.25, pp.4, 2016, https://doi.org/10.5228/KSTP.2016.25.4.227
- Investigation into Thread Rolling Characteristics of Subminiature Screws According to Thread Shapes vol.40, pp.11, 2016, https://doi.org/10.3795/KSME-A.2016.40.11.971
- Finite Element Analysis for Improvement of Folding Defects in the Forging Process of Subminiature Screws vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.509