참고문헌
- H. Kanisawa, T. Mori, Y. Okuno, 1990, Development of wire rod with low flow stress for non-heat-treated fastners, Wire. J. Int., pp. 32-37
- D. Rasouli, Sh. Khameneh Asl, A.Akbarzadeh, G.H.Daneshi, 2009, Optimization of mechanical properties of a micro alloyed steel, mater. And Des, Vol.30, issues.6, pp. 2167-2172. https://doi.org/10.1016/j.matdes.2008.08.024
- Y. S. Lee, J. H. Lee, S. Y. Lee, J. H. Kang, J. H. Kim, 1998, The study on mechanical properties and formability of non-heat-treated and heat-treated cold forging materials, Proc. Kor. Soc. Tech. Plast. Conf., pp. 224-230.
- A. Seshu Kumar, B. Ravi Kumar, G. L. Datta, V. R. Ranganath, 2010, Effect of microstructure and grain size on the fracture toughness of a micro alloyed steels, Mater. Sci.Eng., A, Vol.527, Issues.1-3, pp. 954-960. https://doi.org/10.1016/j.msea.2009.09.027
- D. L. Lee, 2002, The current status of the development of heat-treatment-free steel, Trans. Mater. process, Vol.11, No. 5, pp. 388-393. https://doi.org/10.5228/KSPP.2002.11.5.388
- D. W. Suh, Y. S. Lee, Y. N. Kown, J. H. Lee, 2004, Characterization of microstructure and mechanical properties of micro-alloyed cold forging steel and product, Proc. Kor. Soc. Tech. Plast. Conf., pp. 409-412.
- Okan Topcu, Mustafa Ubeyli, 2009, On the microstructural and mechanical characterizations of a low carbon and micro alloyed steel, Mater. Des., Vol. 30, Issue. 8, pp. 3274-3278. https://doi.org/10.1016/j.matdes.2009.01.017
- Y. S. Lee, J. H. Lee, S. Y. Lee, 1998, The study on the mechanical properties and formability of nonheat- treated cold forging steels, Trans. Mater. Process., Vol. 7, No. 6, pp. 530-538.
- D. Eifler, E. Macherauch, 1990, Microstructure and cyclic deformation behavior of plain carbon and low-alloyed steels, Int. J. Fatigue. 12, No. 3, pp. 165-174. https://doi.org/10.1016/0142-1123(90)90092-S
피인용 문헌
- Effect of Microstructural Factors on Room- and Low-Temperature Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure vol.25, pp.11, 2015, https://doi.org/10.3740/MRSK.2015.25.11.583