DOI QR코드

DOI QR Code

멀티 캐비티 실린더 기어 개발

The Development of Multi-Cavity Cylindrical Gear

  • 이정익 (인하공업전문대학 기계공학부 기계설계과)
  • 투고 : 2010.03.17
  • 심사 : 2010.05.13
  • 발행 : 2010.05.31

초록

파워 윈도우 모터 조립부위에서 실린더 기어는 자동차 도어에서 중요한 부분이다. 이 연구는 대량 수입과 6 캐비티 금형 설계를 대체할 자체 제작 기술력 확보를 위해 수행되었다. 이 연구는 5가지 구체적 주제를 두고 작성되었다. 첫째, CAE를 이용해 시작품을 제작하고, 대량생산 제작을 위해 사전에 해석한다. 둘째, 대량생산 금형(2차원 및 3차원)을 설계한다. 셋째, 샘플 금형을 제작한다. 넷째, 3차원 설계제품을 시제작 후 측정한다. 다섯째, 데이터를 해석하고 금형을 수정한다. 이들 연구를 수행하면서 CAE를 사용한 제품샘플과 대량생산의 해석과 다수 캐비티의 샘플 금형의 제작의 연구가 성공적으로 수행되었다. 결과적으로, 핫런너를 사용하는 일점 게이트 및 6 캐비티가 파워 윈도우 모터 용 실린더 기어를 만드는데 가장 적합한 방법임을 알게 되었다.

The cylindrical gear in power window motor assembly is important to doors of automobile. This study is performed for the purpose of getting a manufacturing technique instead of large quantities import and six-cavity mold production. This multi-cavity cylindrical gear is produced under five procedures. The first, mold design of mass-production, the second, making a CAE model for mass-production, the third, manufacturing of sample mold, the fourth, trying-out and measuring of 3 dimensional design, the fifth, acquisition of data analysis and mold modification. Among them, analysis of mass-production using CAE, designing and manufacturing of multi-cavity are successfully performed. In the results, it is concluded that the mold for one gate and eight-cavity based on hot-runner is suitable for making a cylindrical gear.

키워드

참고문헌

  1. 김승룡, 중소기업기술혁신개발사업 진도보고서, pp. 1-25, 2005.
  2. 이정익, 김승룡, 조정권, "Power Window Motor Assembly", 한국기계기술학회지, Vol 8, No. 1, pp.41-49, 2006.
  3. 이정익, 김승룡, 조정권, "Power Window Motor Assembly의 모듈화에 대한 연구", 한국기계기술 학회 동계학술대회논문집, pp. 27-34, 2006.
  4. 이정익, "자동차 부품에서 전동 창 모터 조립품의 생산화", 한국기계학회 춘계학술대회논문집, pp. 591-596, 2006.
  5. 이종선, "제빵 금형의 거동해석", 한국산학기술학회논문지, Vol.9, No.6, pp.1506-1510, 2008. https://doi.org/10.5762/KAIS.2008.9.6.1506
  6. 정재엽, 김동학, "전산모사 프로그램을 이용한 E-MOLD의 Heating Line 배치의 최적화 설계에 관한 연구", 한국산학기술학회논문지, Vol.9, No.6, pp.1754-1759, 2008. https://doi.org/10.5762/KAIS.2008.9.6.1754