Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Distribution Characteristics of Weld Residual Stress on Butt Welded Dissimilar Metal Plate

이종금속 평판 맞대기용접의 용접잔류응력 분포특성

  • Received : 2010.06.03
  • Accepted : 2010.07.06
  • Published : 2010.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the weld residual stress distribution at a dissimilar-metal welded plate of low alloy carbon steel and stainless steel, which are widely used in nuclear power plants, was characterized. A plate mock-up with butt welding was fabricated using SA 508 low alloy steel and Type 304 stainless steel plates and the residual stresses were measured by the X-ray diffraction method after electrolytic polishing of the plate specimen. Finite element analysis was carried out in order to simulate the butt welding of dissimilar metal plate, and the calculated weld residual stress distribution was compared with that obtained from the measured data. The characteristics of the three-dimensional residual stress distribution in a butt weld of dissimilar metal plates were investigated by comparing the measured and calculated residual stress data.

본 연구에서는 최근 원자력 발전소에서 이종금속용접 접합 소재로 많이 사용되고 있는 SA 508과 Type 304 스테인리스강의 이종금속 용접잔류응력 분포특성을 살펴보기 위하여 이종금속 용접시편을 제작하여 직접 용접을 실시하고 X-선 회절법을 이용하여 용접시험편의 표면에서 용접 잔류응력을 측정하였다. 또한 3차원 유한요소해석을 통하여 이종금속 맞대기용접을 전산모사하고 시편의 용접잔류응력 분포를 구하였다. 측정한 잔류응력과 유한요소해석 결과 계산된 잔류응력을 고찰함으로써 3차원 평판 이종금속 맞대기 용접부의 잔류응력분포 특성을 살펴보았다.

Keywords

References

  1. Section XI Task Group for Piping Flaw Evaluation of ASME Code, 1986, "Evaluation of Flaws in Austenitic Steel Piping," Transactions of the ASME, Journal of Pressure Vessel Technology, Vol.108, pp.352-366. https://doi.org/10.1115/1.3264797
  2. September 2000, Welding Residual Stress Distribution, R6 Revision 4, Chapter IV, Section IV.4.
  3. API 579, Appendix E
  4. Inspection and Mitigation of Alloy 82/182 Pressurizer Butt Welds: Proposed Letter Template for PWR License to NRC, 2007.1.12.
  5. US NRC, "NRC Wolf Creek Flaw Evaluation," Presented at November 30, 2006, Public Meeting Between US NRC and MRP, North Bethesda, Maryland.
  6. Kim, J. S., Chung, H. D. and Choi, Y. H., 2008, "The Regulatory Issues on Bimaterial Weld PWSCC and related Industrial Activity," Proceedings of the KPVP 2008, pp.389-390.
  7. Bamford, W., Cipolla, R., Rudland, D. and Boo, G. D., 2008, "Technical Basis for Revision to Section XI Appendix C for Alloy 600/82/182/132 Flaw Evaluation in Both PWR and BWR Environments," ASME PVP 2008 Conference.
  8. Dong, P. and Cao, Z., 2006, "The Mechanical Basis of Residual Stress Profiles in Proposed API 579 Appendix E," ASME PVP 2006 Conference.
  9. Kim, J. S. and Jin, T. E., 2007, "Development of Engineering Formulae for Welding Residual Stress Distributions of Dissimilar Welds on Nozzle in Nuclear Component," ASME PVP 2007 Conference.
  10. Song, T. K., Kim, Y. J., Lee, K. S., Park, C. Y., Kim, J. S., Kim, J. W., 2007, "Sensitivity Analysis of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Weld," Proceedings of the KSME Fall Annual Meeting, pp.63-68.
  11. Song, T.K., Bae, H.Y., Kim, Y.J., Lee, K.S., Park, C.Y., Yang, J.S., Huh, N.S., Kim, J.-W., Park, J.-S., Song, M.S., Lee, S.G., Kim, J.S., Yu, S.C. and Chang Y.S., 2008, "Results and Analyses for Simulational Round Robin on Welding Residual Stress Prediction in Nuclear Power Plant Nozzle," The KSME 2008 Fall Annual Conference, pp.79-82.
  12. Lee, K.S., Kim, T.R., Park, J.H. Kim, M.W. and Cho, S.Y., 2009, "3-D Characteristics of Residual Stress in the Plate Butt Weld Between SA508 and F316L SS," Trans. of the KSME(A), Vol.33, No.4, pp.401-408. https://doi.org/10.3795/KSME-A.2009.33.4.401
  13. ABAQUS V.6.9-1, Dassault Systems, 2009.
  14. Material Reliability Program: MRP-106, 2004, Welding Residual and Operating Stresses in PWR Alloy182 Butt Welds, EPRI, Palo Alto, CA.
  15. Material Reliability Program: MRP-113, 2004, Alloy82/182 Butt Weld Safety Assessment for U.S. PWR Plant Designs, EPRI, Palo Alto, CA