Abstract
Now normally using a contact method of vehicle Inhibitor Switch that is use direct voltage level signal. This method is good solution for signal deliverly. but The contacted method have a short lifetime because of deterioration of contact surface. so we suggest to non-contacted method using magnetic sensor. The magnetic sensor is used to non-contacted method that is solution for problem of contacted method. In this paper using that of magnetic sensor feature, so we applied to Vehicle Transmitter switch that of non-contacting method. Sensor voltage outputs have variable electric potential that normally 0 mV to 150 mV, and it is depend on Switch Angle. we used two differential sin wave for switching of 5 state signal.
현재 차량에서 일반적으로 많이 쓰이고 있는 변속 스위치의 방법은 전위차를 신호로하는 접촉식이다. 접촉식은 신호전달에 있어서 정확한 방식의 하나이지만 장시간 사용 시 접촉면의 노후화로 인하여 수명이 짧아진다. 비 접촉 방식으로 사용될 수 있는 자기센서를 사용 한다면 접촉면의 노후화를 해결 할 수 있다. 본 논문에서는 자기센서의 특징을 살려서 비 접촉식 방법으로 차량용 변속스위치에 적용 하여 기존 접촉식 방법의 문제를 해결하였다. 센서 출력 전압은 가변적인 전위차를 가지는데 스위치의 각동에 따라 통상 0mV에서 150mV의 값을 가진다. 본 연구에서는 5개의 상태 신호에 대한 두 개의 사인 신호를 사용 하였다.