참고문헌
- Y. C. Kwon, J. H. Lee, C. M. Lee, Y. S. Lee, 2007, Dimensional Changes and Residual Stress of Spur Gear According to the Manufacturing Processes- Comparison of Cold Forging Part with Machining Part-, Trans. Mater. Process, Vol. 16, No. 8, pp. 575-581. https://doi.org/10.5228/KSPP.2007.16.8.575
-
K. H. Lee, S. J. Lee, B. M. Kim, 2006, Micro
Forming Technology for Micro Parts Below
$500{\mu}m$ in Diameter by a Hot Extrusion Process, Proc. Kor. Soc. Tech. Plast. Conf., pp. 417-420. - J. C. Choi, H. Y. Cho, H. H. Kwon, 1994, A New Extrusion Process for Helical Gears: Experimental Study, J. Mater. Process. Technol. Vol. 44, No. 5, pp. 35-53. https://doi.org/10.1016/0924-0136(94)90036-1
- S. M. Park, I. T. Jin, 2005, A Study on Extrusion Process of Cylindrical Product with Helical Fins Using Rotating Extrusion Die, Trans. Mater. Process, Vol. 14, No. 5, pp. 444-451. https://doi.org/10.5228/KSPP.2005.14.5.444
- H. K. Oh, J. K. Lee, 1984, Extrusion of Sintered Porous Metal, J. KSME., Vol. 8, No. 1, pp. 57-64.
- J. W. Kim, S. J. Lee, J. M. Lee, B. M. Kim, 2009, Extrusion of Spur Gear Using High Energy Ball Milled Al-78Zn Powder, J. KSME., Vol. A33, No. 4, pp. 440-446. https://doi.org/10.3795/KSME-A.2009.33.4.440
- J. J. Kwon, B. Y. Joun, M. S. Joun, 2005, Precision Electric Discharge Machining of a Cold Forging Die for Helical Gear Manufacturing, Proc. Kor. Soc. for Precision Eng. Conf., pp. 170-173.
- M. S. Yeh, H. Y. Lin, H. T. Lin, C. B. Chang, 2006, Superplastic Micro-Forming with a Fine Grained Zn-22Al Eutectoid Alloy Using Hot Embossing Technology, J. Mater. Process. Technol., Vol. 180, No. 3, pp. 17-22. https://doi.org/10.1016/j.jmatprotec.2006.04.013
- K. H. Lee, J. M. Lee, B. M. Kim, 2010, Particle Behavior and Deformation During Compaction of Al Powder Using MPFEM, J. KSME-A, Vol. 34, No. 4, pp. 383-390. https://doi.org/10.3795/KSME-A.2010.34.4.383
- R. I. Ramakrishnan, 1989, A methodology for the Simulation of Non-Isothermal and Canned Extrusion of Metal Powders Using Finite Element Method, Master’s degree, Ohio University master’s degree thesis, pp. 35-44.
- J. H. Cho, K. T. Kim, 2000, Densification Behavior of Mixed Metal Powders Under High Temperature, KSME-A, Vol. 24, No. 3, pp. 735-742.
- R. M. German, 1997, Powder Metallurgy Science, 2nd Editon, Metal Powder Industries Federation, New Jersey U.S.A., pp. 158-171.
- Y. Saotome, H Iwazaki, 2001, Superplastic Backward Microextrusion of Microparts for MEMS, J. Mater. Process. Technol, Vol. 119, No. 49, pp. 307-311. https://doi.org/10.1016/S0924-0136(01)00957-8
- M. Bauser, G. Sauer, K. Siegert, 2006, Extrusion, ASM international, USA
- H. A. Kuhn, B. L. Ferguson, 1990, Powder Forging, Metal Powder Industries Federation, USA
- Y. Xun, F. A. Mohamed, 2006, Microstructure and Deformation in the Spray Deposited Zn-22A%Al Alloy, Mater. Sci. Eng., A, Vol. 432, No. 36, pp. 261-268. https://doi.org/10.1016/j.msea.2006.06.019
- M. S. Yeh, C. B. Chang, 2002, Microstructure Effects on the Forgeability of Zn-22Al Eutectoid Ally, J. Mater. Eng. Perform., Vol. 11, No. 1, pp. 71-74 https://doi.org/10.1007/s11665-002-0010-6
- R. M. German 1996, Sintering Theory and Practice, John Wiley & Son, U.S.A., pp. 95-105
피인용 문헌
- Fabrication of a Micro Die by LIGA Process and Hybrid Powder Extrusion Process of Micro-spur Gear vol.19, pp.6, 2010, https://doi.org/10.5228/KSTP.2010.19.6.352
- State-of-art review of past research on manufacturing of meso and micro cylindrical gears 2017, https://doi.org/10.1016/j.precisioneng.2017.07.014
- Fabrication of miniature helical gears by powder extrusion using gas atomized Zn–22%Al powder vol.22, pp.6, 2012, https://doi.org/10.1016/S1003-6326(11)61320-4