References
- Shin, Y. J., Kim, D. W., Lee, E, S., and Kim, K. W., 2004, "The Development of Polishing System A Magnetorheological Fluids," J. of KSPE, Vol. 21, No. 7, pp. 46-52.
- Akami, Y. and Asari, k. L., 1998, "Characterization of particle motion for polishing and texturing under AC field by using partide disperation type ER fluid," J. of Int. Mat. Sys. Struc., Vol. 9, pp. 672-675. https://doi.org/10.1177/1045389X9800900815
- Lee, E. S., Kang, J. H., and Je, T. J., 2000, "High precision grinding technology using electrolytic dressing method," J. of KSMTE., Vol. 9, No. 5 pp. 25-33.
- Kim, J. D. and Choi, M. S., 1995, "Development of the magnetic electrolytic abrasive polishing(MEAP) (2nd) - Development of the MEAP system and finishing characteristics," J. of KSMTE, Vol. 4, No. 3, pp. 31-38.
- Kim, S. H., Chung, D. K., Kim, B. H., Oh, K. H., Chong, S. H., and Chu, J. N., 2009, "Micromachining using hybrid of laser beam and electrical discharge machining," J. of KSPE, Vol. 26, No. 10, pp. 108-115.
- Allen, D. M. and Huang, S. X., 1997 "The reduction of tool wear and machining time for the micro-electro discharge machining of micro-holes by using copper vapour laser machining as a roughing process," Int. J. of Elec. Mach, No. 2, pp. 9-11.
- Ganesh, S., Sundara Raman, and Padmanabhan, K. A, 1995, "Effect of electropolishing on the room temperature low-cycle fatigue behavior of AlSI 304LN stainless steel," Int. J. of Fatigue, Vol. 17, No. 3, pp. 179-182. https://doi.org/10.1016/0142-1123(95)98938-Y
- Hryniewicz. T., 1990 "Towards a new conception of electropolishing of metals and alloys," Proc. of First East-West Symposium on Materials and Processes. pp. 244-252.
- Caire. J.P., Chainet. E., Nguyen. B., and Valenti. P. 1993, "Study of A New Stainless Steel Electropolishing Process," Proc. of the 80th AESF Annual Technical Conference, USA, pp. 149-156
- Lee, J. W. Kim, D. W. Shin, Y. J.. Jang, H. S., and M. W. Cho., 2007, "A Study on the Polishing Process Characteristic of Fused Silica Glass Using Magnetorheological Fluid," Proc. of the KSMTE Autumn Conf., pp. 359-364.
- Kim, K. D., 2000, "A Controllable Micro Damper Using Magnetro-Rheological Fluids," J. of KSPE, Vol. 17, No. 8, pp. 44-45.
- Kim, D. W., Shin, Y. J., Lee, E. S., and Cho, M. W., 2003, "The Principle of Magnetorheological Finishing for A Micro Part," J. of KSPE, Vol. 3, No. 1, pp. 1840-1843.