Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Structure Analysis and Fatigue Life of the Common Rail Pipe

커먼레일 파이프의 구조해석 및 피로수명에 관한 연구

  • 송명준 (부산대학교 창의공학시스템학과) ;
  • 정성윤 (부산대학교 기계기술연구원) ;
  • 황범철 (부산대학교 기계기술연구원) ;
  • 김철 (부산대학교 기계기술연구원)
  • Received : 2009.11.16
  • Accepted : 2009.12.16
  • Published : 2010.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The next generation of diesel engine can operate at high injection pressure up to 1,800bar. The common rail pipe must have higher internal strength because it is directly influenced by the high-pressure fuel. Folding defects in the Common rail pipe can not ensure the structural safety. Therefore, Preform design and fatigue-life analysis are very important for preventing the head of the common rail pipe from folding in the heading process and for predicting fatigue life according to the amount of folding. In this study, a closed form equation to predict fatigue life was suggested by Goodman theory and pressure vessels theory in ASME Code in order to develop an optimization technique of the heading process and verified its reliability through fatigue-structural coupled field analysis. The results calculated by the theory were in good agreement with those obtained by the finite element analysis.

Keywords

References

  1. P. Beierer, K. Huhtala, M. Vilenius, 2007, Experimental Study of the Hydraulic Circuit of a Commercial Common Rail Diesel Fuel Injection System, SAE2007-01-0487.
  2. K. Asada, M. Usui, R. Kusanagi, E. Watanabe, K. Mizuno, 2000, Improving internal fatigue strength of the rail for diesel engine common- rail system, SAE2000-01-0707.
  3. Z. Mazur, A. Carvajal-Martınez, R. Munoz-Quezada, R. Garcıa-Illescas, 2007, Failure analysis of a leakoff oil pipe from injection valves of an off-shore operating diesel engine, Engineering Failure Analysis, Vol. 14, pp. 196-208. https://doi.org/10.1016/j.engfailanal.2005.10.019
  4. E.W. Lee, 1996, Fatigue Analysis of Pressure Vessel by ASME CODE, Trans. Kor. Soc. Steel. Constr., Vol. 8, No. 1, pp. 32-38.
  5. D. J. Kim, B. M. Kim, D. J. Lee, 2001, Process Design of Piston-Pin for Automobile by the Flow Control, Trans. Mater. Process., Vol. 10, No. 2, pp. 151-159.
  6. Y. B. Lee, H. K. Kim, J. S. Jung, 2005, Fundamentals of Metal Fatigue Analysis, Cheong Moon Gak Publishers, pp. 30-31.
  7. H. Y. Kim, B. C. Hwang, W. B. Bae, S. M. Han, C. Kim, 2008, Analysis of an Autofrettage Effect to Improve Fatigue Life of the Automotive CNG Storage Vessel, Trans. Mater. Process., Vol. 17, No. 4, pp. 292-301. https://doi.org/10.5228/KSPP.2008.17.4.292
  8. W. D. Pilkey, 1997, Peterson's stress concentration factors (2nd ed.), John Wiley and Sons Inc, New York, p. 436.
  9. N. W. M. Bishop, 2000, Finite element based fatigue calculations, The International Association for the Engineering Analysis Community, NAFEMS,Farnham, pp. 31-33.

Cited by

  1. Development of an Urban Folding Bike for Public Transportation vol.22, pp.1, 2013, https://doi.org/10.5228/KSTP.2013.22.1.42
  2. Evaluation of Fatigue Life and Structural Analysis for Dish-Type and Spoke-Type Automobile Wheels vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1315