DOI QR코드

DOI QR Code

Effect of Moisture Content and Wood Structure on the Amenability of Japanese Red Pine (Pinus densiflora S. et Z.) to Liquid Treatment

  • Ali Ahmed, Sheikh (Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University) ;
  • Chong, Song-Ho (Department of Forest Resources Utilization, Korea Forest Research Institute) ;
  • Hong, Seung-Hyun (Kangwon National University) ;
  • Kim, Ae-Ju (Kangwon National University) ;
  • Chun, Su-Kyoung (Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University)
  • Received : 2010.03.02
  • Accepted : 2010.03.20
  • Published : 2010.03.25

Abstract

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.

Keywords

References

  1. Ahmed. S. A. and S. K. Chun, 2009. Observation or liquid permeability related to anatomical characteristics in Samanea samau, Turkish Journal of Agriculture and Forestry 33(2): 155 - 163.
  2. Ahmed, S. A. 2010. The effects of woodchip fertilizer on rice and tree seedlings, Ph.D. Thesis. Kangwon National University, Republic of Korea.
  3. Bamber, R. K. and K. Fukazawa. 1985. Sapwood and heartwood: A review. Forestry Abstract 46(9): 567-580
  4. Bao, F., J. Lu, and Y. Zhao. 2001. Effect of bordered pit torus position on the permeability of Chinese Yezo spruce. Wood and Fiber Science 33(2): 193-199.
  5. Bauch, J., W. Schweers. and H. Berndt. 1974. Lignification during heartwood formation: Comparative study of rays and bordered pit membranes in coniferous woods. Holzforschung 28(3): 86 -91. https://doi.org/10.1515/hfsg.1974.28.3.86
  6. Bonner, L. D. and R. J. Thomas. 1972. The ultrastructure of intercellular passageways in vessels or yellow poplar (Liriodendron tulipifera L.). Part I: Vessel pining. Wood Science and Technology 6(3): 196-203. https://doi.org/10.1007/BF00351577
  7. Collett. B. M. 1972. A review of surface and interracial adhesion in wood science and related fields. Wood Science and Technology 6(1): 1 -42. https://doi.org/10.1007/BF00351806
  8. Dinwoodie, J. M. 1981. Timber: Its structure, properties and utilisation. 6th edition, Macmillan, London.
  9. Erickson, H. D. 1970. Permeability of southern pine wood - A review. Wood Science 2(3): 149 -158.
  10. Flynn, K. A. 1995. A review of the permeability, fluid flow, and anatomy of spruce (Picea spp.). Wood and Fiber Science 27(3): 278 -284.
  11. Furuno, T., T. lmamamura, and H. Kajita. 2004. The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: A properties enhancement with neutralized phenolic-resin and resin penetration into wood cell wall, Wood Science and Technology 37(5): 349 -361. https://doi.org/10.1007/s00226-003-0176-6
  12. Hassler, C. C., J. J. Slahor, R. C. DeGroot, and D. J. Gardner. 1998. Preservative treatment evaluation of five Appalachian hardwoods at two moisture contents. Forest Product Journal 48(7/8): 37-42.
  13. Hunt, G. M. and G. A. Garrett. 1967. Wood preservation. McGraw-Hill, New York.
  14. Islam, M. N., K. Ando, H. Yamauchi, and N. Hattori. 2009. Effects of species and moisture content on penetration of liquid in laser incised lumber by the passive impregnation method. European Journal of Wood and Wood Products 67(2): 129-133. https://doi.org/10.1007/s00107-008-0292-y
  15. Kollmann, F. F. P. and W. A. Cote. 1984. Principles of wood science and technology: I. Solid wood. Springer-Verlag, Berlin.
  16. KSA (Korea Standard Association) 2001. Determination of density and specific gravity of wood. KS F 2198.
  17. Lee, W. K., K. von Gadow, D. J. Chung, J. L. Lee, and M. Y. Shin. 2004. DBH growth model for Pinus densiflora and Quercus variabilis mixed forests in central Korea. Ecological Modelling 176(1-2): 187-200. https://doi.org/10.1016/j.ecolmodel.2003.11.012
  18. Malkov, S., P. Tikka, and J. Gullichsen. 2003. Towards the complete impregnation of wood chips with aqueous solutions: Part I. A retrospective and critical evaluation of the penetration process. Paperi ja Puu 85(8): 460 -466.
  19. Murmanis, L. and M. Chudnoff 1979, Lateral now in beech and birch as revealed by the electron microscope. Wood Science and Technology 13(2): 79 - 87. https://doi.org/10.1007/BF00368601
  20. Olsson, T., M. Megnis, J. Varna, and H. Lindberg. 2001. Study of the transverse liquid flow paths in pine and spruce using scanning electron microscopy. Journal of Wood Science 47(4): 282-288. https://doi.org/10.1007/BF00766714
  21. Palin, M. A. and J. A. Petty. 1981. Permeability of water of the cell wall materials of spruce heartwood, Wood Science and Technology 15(3): 161-169. https://doi.org/10.1007/BF00353467
  22. Paranyi, N. I. and W. Rabinovitch. 1955. Determination of penetration rate of liquid media into wood using a quartz spiral balance. Pulp and Paper Magazine of Canada 56(3): 1164-1170.
  23. Scheikl, M. and M. Dunky. 1998. Measurement of dynamic and static contact angles on wood for the detcrrnination of its surface tension and penetration of liquids into the wood surface. Holzforschung 52(1): 89-94. https://doi.org/10.1515/hfsg.1998.52.1.89
  24. Skaar, C. 1972. Water in wood. Syracuse University Press, New York.
  25. Smith, W. B ., N. Abdullah, D. Herdman, and R. C. DeGroot. 1996. Preservative treatment of red maple. Forest Product Journal 46(3): 35 -41.
  26. Stamm. A. J. 1973. Penetration of hardwoods by liquids. Wood Science and Technology 7(4): 285-296. https://doi.org/10.1007/BF00351074
  27. Trenard, Y. and P. Gueneau, 1984. Penetration pathways of liquid gallium in wood seen by scanning electron microscopy. Wood and Fiber Science 16(3): 403-410.
  28. Tsoumis, G. T. 1991. Science and technology of wood: Structures, properties. utilization, Van Nostrand Reinhold. New York. p. 494.
  29. Usta, I. and M. D. Hale. 2004. Effects or seed origin and site on the amenability of Sitka spruce (Picea sitchensis (Bong.) Carr.) grown in Britain to preservative treatment in longitudinal and radial directions. Forestry 77(1): 45-59. https://doi.org/10.1093/forestry/77.1.45
  30. Usta, I. 2006. Amenability of European silver fir (Abies alba Mill.) to preservative treatment by the full-cell process in longitudinal, tangential, radial and triplex flow pathways on the base of wood drying. Building and Environment 41 (8): 1027-1033. https://doi.org/10.1016/j.buildenv.2005.04.015
  31. Walker, J. F. C. 1993. Primary wood processing: Principles and practice. Chapman and Hall Ltd., London. p. 595.
  32. Wilkinson, J. G. 1979. Industrial timber preservation, Associated Business Press, London.

Cited by

  1. Ammonium nitrate-impregnated woodchips: a slow-release nitrogen fertilizer for plants vol.57, pp.4, 2011, https://doi.org/10.1007/s10086-011-1178-x
  2. Recent literature on bryophytes—114(1) vol.114, pp.1, 2011, https://doi.org/10.1639/0007-2745.114.1.241