DOI QR코드

DOI QR Code

Feasibility of Non-Korean Standard Glulam Using a Lower Grade Lamina of Japanese cedar for Structural Use

  • Oh, Jung-Kwon (Department of Forest Sciences, Seoul National University) ;
  • Lee, Jun-Jae (Department of Forest Sciences, Seoul National University, Research Institute for Agriculture and Life Sciences)
  • 투고 : 2010.02.03
  • 심사 : 2010.03.02
  • 발행 : 2010.03.25

초록

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.

키워드

참고문헌

  1. ASTM. 2006. Standard Practice for Establishing Clear Wood Strength Values, ASTM D 2555-06, American Society for Testing and Materials.
  2. ASTM. 2008. Standard practice for establishing allowable properties for structural glued laminated timber (glulam), ASTM D 3737-08, American Society for Testing and Materials.
  3. ASTM. 2009. Standard Test Methods for Small Clear Specimens of Timber. ASTM D 143-09. American Society for Testing and Materials.
  4. Breyer. D. E. 1993. Design of wood structures, 3rd ed. New York, USA.
  5. Brown, K. M. and S. K. Suddarth. 1977, A glued-laminated beam analyzer for conventional or reliability based engineering design. Wood Research Laboratory. Purdue Univ. Res. Bull No. 940.
  6. Foschi, R. O. and J. D, Barrett. 1980. Glued-laminated beam strength: a model. J. Struct. Div. ASCE, 106: 1735-1754.
  7. Foschi, B. R., B. R. Folz, and F. Z. Yao. 1989. Reliability-based design of wood structures. Univ. of British Columbia pp. 239 - 244, 264 - 272.
  8. Freas. A. D. and M. L. Selbo, 1954. Fabrication and design of glued laminated wood structural members. Technical Bulletin No. 1069 Forest Products Laboratory, USDA.
  9. KS 2005. tructural glued laminated timber, KSF 3021, Korean Standards Association.
  10. Lee, J. J. and G. C. Kim. 2000. Study on the estimation of the strength properties of structural glued laminated timber (I) determination or optimum MOE as an input variable. J. Jpn. Wood Res. Soc. 46: 115 - 121.
  11. Lee, J. J., J. S. Park, K. M. Kim, and J. K. Oh. 2005. Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE, J. Wood Sci. 51: 640-647 https://doi.org/10.1007/s10086-005-0704-0

피인용 문헌

  1. Feasibility of Ultrasonic Log Sorting in Manufacturing Structural Lamination from Japanese Cedar Logs vol.39, pp.2, 2011, https://doi.org/10.5658/WOOD.2011.39.2.163