Estimation of The Basic Properties of Two-Lift Concrete Pavement to Apply Korea Condition

이층 포설 콘크리트 포장의 국내 적용을 위한 강섬유 보강 콘크리트 기초 물성평가

  • 원홍상 (중앙대학교 건설환경공학과) ;
  • 류성우 (중앙대학교 건설환경공학과) ;
  • 홍종용 (명지대학교 토목환경공학과) ;
  • 조윤호 (중앙대학교 건설환경공학과)
  • Received : 2009.10.15
  • Accepted : 2009.11.13
  • Published : 2010.03.15

Abstract

This study had a focus on investigating technical validity of Two-Lift Concrete Pavements which had never been constructed in Korea in order to olve the problem of existing concrete pavements. This study found out the application of Steel Fiber Reinforced Concrete (SFRC) which was one of ew techniques. Also, optimal steel fiber contents and pavement thickness were determined. This study also measured compressive strengths, lexural strengths, toughness indexes, tensile strengths and fatigue strengths to estimate the performance of SFRC of according to results of aboratory experiments, slumps and air contents of concrete specimens the standards satisfied and compressive strengths to open traffic. At bending ests, Toughness Index of SFRC increased but flexural strength didn’'t increase as compared with non-steel fiber concretes. And, energy absorption of SFRC was very good and SFRC showed improvement in freezing and thawing resistances. To complete this research, we will evaluate the pplication methods and performance of SFRC at field section.

본 연구에서는 콘크리트 포장의 균열, 스폴링 등의 파손문제를 해결하기 위해 국내 시공사례가 없는 이층 포설 공법의 도입 및 기술 경제적 타당성을 검토하고자 하였다. 본 포장공법중 하나인 강섬유 보강 콘크리트(SFRC, Steel Fiber Reinforced Concrete)의 포장 배합 적용성이 검토되었다. 강섬유 함량과 포장 높이가 산정되었으며, 강섬유 보강 콘크리트의 물성 평가를 위해 압축강도, 휨강도, 휨인성 지수, 인장강도, 피로강도를 측정하였다. 슬럼프와 공기량은 대부분이 시방 기준을 만족하였으며, 28일 강도도 교통개방을 할 수준 정도로 발현되었다. 휨강도 실험 결과, 강섬유 보강 콘크리트가 무보강 콘크리트에 비해 휨인성은 증가하였지만 휨강도는 증가하지 않았다. 에너지 흡수능력, 피로 저항성 및 동결 융해저항성은 강섬유 보강 콘크리트가 무보강 콘크리트에 비해 향상되었다. 향후, 시험시공을 통해 강섬유 보강 콘크리트의 현장 적용성 및 공용성을 평가할 것이다.

Keywords

References

  1. 건설교통부, "에너지 절약형 고기능 섬유보강 콘크리트의 개발 및 2 설계.시공 지침안 작성에 관한 연구", 건설교통부, pp.30-34, 1997
  2. 박홍용, 곽규영, "강섬유보강 콘크리트의 전단강도에 관한 실험적 연구", 명지대학교, pp.6-11, 2002
  3. 한국공업규격, "굳지 않은 콘크리트의 시료 채취 방법", KS F 2401, 1997
  4. 한국공업규격, "콘크리트의 압축강도 시험 방법", KS F 2405, 1997
  5. 한국공업규격, "굳지 않은 콘크리트의 단위 용적 중량 및 공기량 시험방법", KS F 2409, 1995
  6. 한국공업규격, "콘크리트의 휨강도 시험방법(단순보의 3등분점 하중법)", KS F 2408, 1995
  7. 한국도로공사, "2004년 고속도로 업무통계"
  8. 한국도로공사 도로연구소, "강섬유보강 숏크리트의 성능향상 및 품질기준 정립" (II), 한국도로공사, pp.26-37, 2001
  9. ACI COMMITTEE 544, "Design Consideration for Steel Fiber Reinforced Concrete : Workability, Behavior under Long-Term Loading, and Air- Void Characteristics", ACI, Vol. 85, No.3, pp.189-196, 1988
  10. ASTM C 1018-84, "Standard Test Method for Flexural Toughness and First - Crack Stregnth of Fiber - Reinforced Concrete (using Beam with Third Point Loading)", ASTM C 1018-84, pp.656-661, 1984
  11. D. Tuan Ngo , Department of Civil and Environmental Engineering, The University of Melbourne, Parkville, Victoria 3052, Australia "Punching shear resistance of high strength Concrete slabs"