References
- Cohen, H., Rogers, G. F. C., and Saravanamuttoo, H. I. H., 1996, Gas Turbine Theory, Longman Group Limited, Essex.
- Hudson, H. P., and Dominy, R. G., 1987, “The Off-Design Performance of a Low Pressure Turbine Cascade,” ASME Journal of Turbomachinery, Vol. 109, pp. 201-209. https://doi.org/10.1115/1.3262086
- Yamamoto, A., 1989, “Endwall Flow/Loss Mechansm in a Linear Turbine Cascade With Blade Tip Clearance,” ASME Journal of Turbomachinery, Vol. 111, pp. 264-275. https://doi.org/10.1115/1.3262265
- Jouini, D. B. M, Sjolander, S. A., and Moustapha, S. H., 2001, “Aerodynamic Performance of a Transonic Turbine Cascade at Off-Design Conditions,” ASME Journal of Turbomachinery, Vol. 123, pp. 510-518. https://doi.org/10.1115/1.1370157
- Brear, M. J. Hudson, H. P. and Harvy, N. W., 2002, “Pressure Surface Separations in Low-Pressure Turbines-Part 1: Midspan Behavior,” ASME Journal of Turbomachinery, Vol. 124, pp. 393-401. https://doi.org/10.1115/1.1450764
- Rhee, D-H and Cho, H. H., 2006, “Local Heat/Mass Transfer Characteristics on a Rotating Blade with Flat Tip in a Low Speed Annular Cascade-Part I: Near-Tip Surface,” ASME Journal of Turbomachinery, Vol. 128, pp. 96-109. https://doi.org/10.1115/1.2098756
- Lee, S. W. and Park, J. J., 2009, “Effects of Incidence Angle on Endwall Convective Transport Within a High-Turning Turbine Rotor Passage,” International Journal of Heat and Mass Transfer, Vol. 52, pp. 5922-5931. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.015
- Lee, S. W. and Chae, B. J., 2008, “Effects of Squealer Rim Height on Aerodynamic Losses Downstream of a High-Turning Turbine Rotor Blade,” Experimental Thermal and Fluid Science, Vol. 32, pp. 1440-1447. https://doi.org/10.1016/j.expthermflusci.2008.03.004
- Treaster, A. L. and Yocum, A. M., 1979, “The Calibration and Application of Five-Hole probes,” ISA Transactions, Vol. 18, pp. 23-34.
- Lee, S. W. and Jun S. B., 2005, “Reynolds Number Effects on the Non-Nulling Calibration of a Cone-Type Five-Hole Probe for Turbomachinery Applications,” Journal of Mechanical Science and Technology, Vol. 19, pp. 1632-1648. https://doi.org/10.1007/BF03023940
- Lee, S. W. and Yoon, T. J., 1999, “An Investigation of Wall-Proximity Effect Using a Typical Large-Scale Five-Hole Probe,” KSME International Journal, Vol. 13, pp. 273-285.
- Abernethy, R.B., Benedict, R. B., and Dowdell, R. B., 1985, “ASME Measurement Uncertainty,” ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164. https://doi.org/10.1115/1.3242450
- Lee, S. W. and Choi, M. Y., 2010, “Tip Gap Height Effects on the Aerodynamic Performance of a Cavity Squealer Tip in a Turbine Cascade in Comparison with Plane Tip Results-Part 2: Aerodynamic Losses,” Experiments in Fluids (in press).
- Lee, S. W., Moon, H. S., and Lee, S. E., 2009, “Tip Gap Height Effects on Flow Structure and Heat/Mass Transfer over Plane Tip of a High-Turning Turbine Rotor Blade,” International Journal of Heat and Fluid Flow, Vol. 30, pp. 198-210. https://doi.org/10.1016/j.ijheatfluidflow.2008.12.009