참고문헌
- 서정민, 최금찬, 박정호, 류재용, 2007, 대기공학설계, 동화기술, 234-299.
- 서정민, 류재용, 박정호, 전보경, 최금찬, 손영일, 2007, 충격기류식 여과집진장치에서 운전조건 변화로 인한 여과저항에 관한 연구, 한국환경과학회지, 16(4), 449-458.
- 서정민, 최금찬, 박정호, 2004, 충격 기류식 여과 집진장치의 펄스 간격 및 분사거리에 따른 압력 손실 변화에 관한 기초연구, 한국환경과학회지, 13(3), 223-232.
- 서정민, 김찬훈, 박출재, 2001, 충격기류식 여과집진설비에서 여과저항에 관한 연구, 한국폐기물학회, 18(6), 503-509.
- Billing, C. E., 1996, Effect of Particles Accumlation in Aerosol Filtration, Ph. D. Dissertation, California Institute of Technology, 37-42.
- Call, S., Conta, P. l., Thomas, D., Bemer, D., Leclerc, D., 2002, Evolutions of efficiency and pressure drop of filter media during clogging and cleaning cycles, Powder Technol., 128(2-3), 213-217. https://doi.org/10.1016/S0032-5910(02)00199-7
- Dean, A. H., Cushing, K. M., 1988, Survey on the use of Pulse-Jet Fabric Filters, J. Air Pollut. Control Assoc., 38(1), 90-96.
- Dean, A. H., Cushing, K. M., 1987, Pulse-Jet Fabric Filters for Coal-Fired Utility and Industrial Boilers, EPRI Report, CS-5386, Research Project 1129-8.
- Ellenbecker, M. J., Leith, D., 1983, Dust removal characteristics of fabrics used in pulse-jet filters, Powder Technol., 36(1), 13. https://doi.org/10.1016/0032-5910(83)80003-5
- Ellenbecker, M. J., Leith, D., 1980, The effect of dust retention on pressure drop in a high velocity pulse-jet fabric filter, Powder Technol., 25(2), 147-154. https://doi.org/10.1016/0032-5910(80)87025-2
- Gabites, J. R., Abrahamson, J., Winchester, J. A., 2008, Design of baghouses for fines collection in milk powder plants, Powder Technol., 187(1), 46-52. https://doi.org/10.1016/j.powtec.2008.01.012
- Hindy, K. T., Sievert, J., Loeffler, F., 1987, Influence of cloth structure on operational characteristics of pulse-jet cleaned filter bags, Environ. Int., 13(2), 175-181. https://doi.org/10.1016/0160-4120(87)90087-0
- Hsin-Chung, L. U., Tsai, C. J., 1996, Numerical and experimental study of cleaning process of a pulse-jet fabric filtration system, Environ. Sci. Technol., 30(11), 3243-3249. https://doi.org/10.1021/es960020u
- Jeon, K. J., Jung, Y. W., 2004, A simulation study on the compression behavior of dust cakes, Powder Technol., 141(1-2), 1. https://doi.org/10.1016/j.powtec.2003.12.014
- Kavouras, A., Krammer, G., 2003, Distributions of age, thickness and gas velocity in the cake of jet pulsed filters-application and validation of a generations filter model, Chem. Eng.Sci., 58(1), 223. https://doi.org/10.1016/S0009-2509(02)00462-1
- Keity M., 1991, Expert System Control of Fabric Filters, Filtration & Separation, 28(4), 183-194. https://doi.org/10.1016/0015-1882(91)80073-E
- Keity M., 1991, The Role of Venturies in Pulse Jet Filter, Filtration & Separation, 28(1), 33-36. https://doi.org/10.1016/0015-1882(91)80039-8
- Kim, S. T., 2004, A study on the pressure drop variance of pulse interval, injection distance in pulse air-jet type bag filter, Master thesis, Department of Environmental Science, Miryang National University, Miryang.
- Koehler, J. L., Leith, D., 1983, Model calibration for pressure drop in a pulse-jet cleaned fabric filter, Atmos. Env., 17(10), 1909-1913. https://doi.org/10.1016/0004-6981(83)90348-7
- Leith, D., Ellenbecker, M. J., 1980, Theory for pressure drop in a pulse-jet cleaned fabric filter, Atmos. Env., 14(7), 845-852. https://doi.org/10.1016/0004-6981(80)90141-9
- Liu, D. H. F., Liptak, B. G., 1997, Air pollution: Environmental Engineers' Handbook, 2nd ed., Lewis Publishers (CRC Press), 346-349.
- Loeffler, F., Sievert, J., 1987, Cleaning mechanisms in pulse-jet fabric filters, Filtr. Sep., 24(2), 110-113.
- Ni, L. A., Yu, A. B., Lu, G. Q., Howes, T., 2006, Simulation of the cake formation and growth in cake filtration, Miner. Eng., 19(10), 1084. https://doi.org/10.1016/j.mineng.2006.03.012
- Park, S. J., Choi, H. K., Park, Y. O., Son, J. E., 2003, Effects of a shroud tube on flow field and particle behavior inside a bag-filter vessel, Aerosol Sci. Technol., 37(9), 685-693. https://doi.org/10.1080/02786820300917
- Peukert, W., Wadenpohl, C., 2001, Industrial separation of fine particles with difficult dust properties, Powder Technol., 118(1-2), 136-148. https://doi.org/10.1016/S0032-5910(01)00304-7
- Saleem, M., Krammer, G., 2007, Optical in-situ measurement of filter cake height during bag filter plant operation, Powder Technol., 173(2), 93. https://doi.org/10.1016/j.powtec.2006.12.008
- Silva, C. R. N., Negrini, V. S., Aguiar, M. L., Coury, J. R., 1999, Influence of gas velocity on cake formation and detachment, Powder Technol., 101(2), 165. https://doi.org/10.1016/S0032-5910(98)00168-5
- Simon, X., Chazelet, S., Thomas, D., Bemer, D., Regnier, R., 2007, Experimental study of pulse-jet cleaning of bag filters supported by rigid rings, Powder Technol., 172(2), 67-81. https://doi.org/10.1016/j.powtec.2006.10.005
- Tsai, C. J., Tsai, M. L., Lu, H. C., 2000, Effect of filtration velocity and filtration pressure drop on the bag-cleaning performance of a pulse-jet baghouse, Sep. Sci. Technol., 35(2), 211-226. https://doi.org/10.1081/SS-100100152
피인용 문헌
- Collection Characteristics of Wet-type Multi-layered and Multi-staged Porous Plate System vol.18, pp.3, 2014, https://doi.org/10.9726/kspse.2014.18.3.042