DOI QR코드

DOI QR Code

Buckling capacity of uniformly corroded steel members in terms of exposure time

  • 투고 : 2009.06.15
  • 심사 : 2010.10.22
  • 발행 : 2010.11.25

초록

Most of steel structures in various industries are subjected to corrosion due to environmental exposure. Corrosion damage is a serious problem for these structures which may reduce their carrying capacity. These aging structures require maintenance and in many cases, replacement. The goal of this research is to consider the effects of corrosion by developing a model that estimates corrosion loss as a function of exposure time. The model is formulated based on average measured thickness data collected from three severely corroded I-beams (nearly 30 years old). Since corrosion is a time-dependent parameter. Analyses were performed to calculate the lateral buckling capacity of steel beam in terms of exposure time. Minimum curves have been developed for assessment of the remaining lateral buckling capacity of ordinary I-beams based on the loss of thicknesses in terms of exposure time. These minimum curves can be used by practicing engineers for better estimates on the service life of corrosion damaged steel beams.

키워드

참고문헌

  1. BSI5950(1985), BS 5950: Part 1. Code of practice design in simple and continuous construction, hot rolled sections,/Structural use of steel work in building/,British Standard Institution.
  2. Czarnecki, A.A. and Nowak, A.S. (2008), "Time-variant reliability profiles for steel girder bridges", Struct. Saf., 30, 49-64. https://doi.org/10.1016/j.strusafe.2006.05.002
  3. Gallon, M. J. (1993), ICI Engineering, Managing structural corrosion in chemical plant, New Steel Construction.
  4. Kayser, J.R. (1988), The effects of corrosion on the reliability of steel girder bridges, Ph.D thesis, Department of Civil Engineering, University of Michigan.
  5. Kulicki, J.M., Prucs, Z., Sorgenfrei, D.F. and Mertz, D.R. (1990), Guidelines for evaluating corrosion effects in existing steel bridges, National Cooperative Highway Research Program, Report 333, Transportation Research Board, National Research Council, Washington, D.C.
  6. Komp, M.E. (1987), "Atmospheric corrosion ratings of weathering steels-calculation and significance", Mater. Performance., 26, 42-44.
  7. Martin, L.H. and Purkiss, J.A. (1992), Structural Design of Steelwork to BS 5950, 1st Edition, Edward Arnold, London.
  8. Nakai, T., Matsushita, H. and Yamamoto, N. (2006), "Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending", J. Mar. Sci. Technol., 11, 52-64. https://doi.org/10.1007/s00773-005-0203-4
  9. Paik, J.K., Kim, S.K. and Lee, S.K. (1998), "Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers", Ocean. Eng., 25, 837-860. https://doi.org/10.1016/S0029-8018(97)10009-9
  10. Rahgozar, R. (2009), "Remaining capacity assessment of corrosion damaged beams using minimum curves", J. Constr. Steel Res., 65, 299-307. https://doi.org/10.1016/j.jcsr.2008.02.004
  11. Rahgozar, R. (1998), Fatigue endurance of steel structures subjected to corrosion, Ph.D. thesis, Department of Civil Engineering, University of Bristol, UK.
  12. Rahgozar, R. and Smith, J.W. (1997). "Fatigue endurance of steel structures subjected to pitting corrosion," Proceeding of Fourth International Conference on Civil Engineering, Sharif University of Technology, Tehran, Iran, 237-246.
  13. Sharifi, Y. and Rahgozar, R. (2010a), "Evaluation of the remaining shear capacity in corroded steel I-beams", Adv. Steel. Constr., 6(2), 803-816.
  14. Sharifi, Y. and Rahgozar, R. (2010b), "Simple assessment method to estimate the remaining moment capacity of corroded i-beam sections", Transaction A: Civil Eng., 17(2), 161-167.
  15. Smith, J.W. (1993), "Mechanical properties of samples of structural steel affected by corrosion", Report No. UBCE/JWS/93/01, Department of Civil Engineering, University of Bristol, UK.
  16. Nakai, T., Matsushita, H. and Yamamoto, N. (2006), "Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending", J. Mar. Sci. Technol., 11, 52-64. https://doi.org/10.1007/s00773-005-0203-4
  17. Timoshenko, S.P. and Gere, J.M. (1961), Theory of elastic stability, New York, McGraw-Hill Book Company.
  18. Trahair, N.S., Bradford, M.A. and Nethercot D.A. (2001), The Behavior and Design of Steel Structures to BS5950, 3rd Edition, British, London, Spon Press, Taylor & Francis Group.
  19. Townsened H.E. and Zoccola J.C. (1982), "Eight year atmospheric corrosion performance of weathering steel in industrial, rural, and marine environments", Atmospheric corrosion of metals, ASTM STP 767, Am. Soc. Test. Mater., 45-59.

피인용 문헌

  1. Tensile strength prediction of corroded steel plates by using machine learning approach vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.635
  2. Structural behaviors of notched steel beams strengthened using CFRP strips vol.25, pp.1, 2010, https://doi.org/10.12989/scs.2017.25.1.035
  3. Experimental and numerical investigations on remaining strengths of damaged parabolic steel tubular arches vol.34, pp.1, 2010, https://doi.org/10.12989/scs.2020.34.1.001
  4. Seismic performance of steel columns corroded in general atmosphere vol.40, pp.2, 2010, https://doi.org/10.12989/scs.2021.40.2.217
  5. Assessment of the Bending Moment Capacity of Naturally Corroded Box-Section Beams vol.14, pp.19, 2021, https://doi.org/10.3390/ma14195766