Optimal Condition for Spot Weldment of Dissimilar Steel Sheet in Automotive

GA에 의한 차량용 이종재 최적점용접 조건

  • Han, Jae-Hee (Department of Mechanical system Engineering, Chonbuk National University) ;
  • Yang, Sung-Mo (Department of Mechanical system Engineering, Chonbuk National University) ;
  • Yu, Hyo-Sun (Department of Mechanical system Engineering, Chonbuk National University) ;
  • Kim, Tae-Jin (Department of Mechanical system Engineering, Chonbuk National University)
  • 한재희 (전북대학교 기계시스템공학부) ;
  • 양성모 (전북대학교 기계시스템공학부) ;
  • 유효선 (전북대학교 기계시스템공학부) ;
  • 김태진 (전북대학교 기계시스템공학부)
  • Received : 2009.08.27
  • Accepted : 2009.12.30
  • Published : 2010.07.01

Abstract

Welding conditions in process of spot welding must become optimum and need to guarantee stability and reliability of vehicle body considering dynamic load history. Because welding parameters in process of spot welding are various, it is difficult that the quality of spot weldment was included in the optimum levels. In this paper, we found the optimum welding conditions satisfying KS spot welding qualities using genetic algorithm and spot welding experiments of high tensile strength steel and galvanized steel. Those experiments were dissimilar weld and 2-lap spot welding. Genetic algorithm created random welding condition after that, selected optimum individuals by probability concept.

Keywords

References

  1. D. K. Yun, Advanced Welding Engineering, Hakmunsa, p.337, 1982.
  2. H. H. Kim, Fatigue Strength and Life Evaluation for Spot Weldment of High Strength Steel Sheet in Automobile, M. S. Thesis, Dept. of Precision Mechanical Engineering Graduate School of Chonbuk National University, 2006.
  3. Y. H. Derek and D. Debasish, "A Genetic Algorithm Application for Sequencing Operations in Process Planning for Parallel Machining," Transaction of IIE, Vol.15, No.4, pp.388-394, 1996.
  4. S. J. Lee, Y. S. An, D. W. Lee, S. S. Cho and W. S. Joo, "A Study on Optimal Design of Rocker Arm Shaft Using Improved Genetic Algorithm," Journal of KSME(A), Vol.29, No.6, pp.835-841, 2005.
  5. C. R. Reeves, "Using Genetic Algorithms with Small Populations," Proc. of the Fifth Intern. Conf. on Genetic Algorithms, pp.92-99, 1993.
  6. J. J. Grefenstette, "Optimization of Control Parameters for Genetic Algorithms," IEEE Syst. Man Cybern, Vol.16, pp.122-128, 1986. https://doi.org/10.1109/TSMC.1986.289288
  7. D. E. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learing, Addison-Wesley, 1989.
  8. K. S. Kim, Optimization of Spot Weldment and Fatigue Life using Genetic Algorithm, M. S. Thesis, Dept. of Precision Mechanical Engineering Graduate School of Chonbuk National University, 2006.
  9. E. O. Lee, C. M. Lee, C. D. Kee, H. H. Yu and S. M. Yang, "Optimization Design for Dissimilar Weld in Automobile using Genetic Algorithm," Fall Conference Proceedings, KSAE, pp.1924-1929, 2006.
  10. C. S. Oh, H. E. Im and W. G. Hwang, "Determination of a Duty Cycle for Tracked Vehicle Using Genetic Algorithm," Transactions of KSAE, Vol.13, No.3, pp.154-161, 2005.
  11. D. W. Kim and K. Y. Kim, "Robot Arc Welding Task Sequencing using Genetic Algorithms," Journal of the Korean Society of Precision Engineering, Vol.16, No.1, pp.49-60, 1999.
  12. K. Nakane and Y. Torii, "Study on Determination of Optimum Welding Condition in Resistance Spot Welding," Journal of Japanese Welding Society, Vol.42, No.3, pp.65-75, 1973.
  13. H. H. Kim, J. H. Park, I. H. Kwon, H. H. Yu and S. M. Yang, "Strength Characteristics on Multi-Lap Spot Joint of High Strength Steel Sheet Welded by Various Welding Conditions," Fall Conference Proceedings, KSAE, Vol.3, pp.1159-1163, 2004.