초록
압력용기, 유압호스 조립체, 어큐뮤레이터, 유압실린더, 유압밸브, 파이프 등의 제품들의 시험은 일반적으로 ISO와 SAE에서 정의되는 충격압력 조건들로 작동되고 있다. 충격압력 시험 장비는 높은 압력, 정확한 제어 시스템, 장기간 사용할 수 있는 수명을 가지는 것이 요구되며, 언급된 사항들은 유압 시스템에서 보다 높은 압력이 발생되어지는 충격압력 발생기를 제작하는데 필요하다. 충격압력 시험기는 제어는 편리하지만 높은 가격인 서보밸브 제어 시스템이 적용되었다. 제어 시스템의 적용은 시험하는 제품들에 영향을 주는 압력의 파형을 생성한다. 본 연구는 유량과 압력, 압력의 상승속도를 고려한 충격압력 발생시스템 설계 및 제작 과정을 연구하는 것을 목적으로 한다. 이것은 또한 결과로써 시스템에서 초고압의 압력을 발생시키는 압력 파형을 얻을 수 있었다.
Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions prescribed in ISO and SAE standards. The impulse pressure test machine needs to have a high pressure, a precise control system and a long life. It should satisfy the requirements for fabrication of the impulse tester to generate ultra high pressure in the hydraulic system. In the impulse tester, a servo-valve control system is adopted; although the control application is convenient, it is expensive owing to the cost of developing the system. The type of the control system determines the pressure wave, which affects the components that are tested. In this study, the manufacturing process and the intensifier system design related to the flow, pressure, and the increasing rate of pressure are investigated. The results indicate the ultra high pressure waves in the system.