References
- Junkar, M., Jurisevic, B., and Fajdiga, M., "Finite Element Analysis of Single-Particle Impact in Abrasive Water Jet Machining," International Journal of Impact Engineering, Vol. 32, No. 7, pp. 1095-1112, 2006. https://doi.org/10.1016/j.ijimpeng.2004.09.006
- Li, Y., Microelectronic Applications of Chemical Mechanical Planarization, Wiley-Interscience, 2007.
- Fahnle, O., Brug, H., and Frankena, H., "Fluid Jet Polishing of Optical Surfaces," Applied optics, Vol. 37, No. 28, pp. 6771-6773, 1998. https://doi.org/10.1364/AO.37.006771
- Lin, Y.-Y., Chen, D.-Y., and Ma, C., "Simulations of a Stress and Contact Model in a Chemical Mechanical Polishing Process," Thin Solid Films, Vol. 17, No. 21, pp. 6027-6033, 2009.
- Saka, N., Eusner, T., and Chun, J. H., "Nano-Scale Scratching in Chemical-Mechanical Polishing," CIRP Annals - Manufacturing Technology, Vol. 57, No. 1, pp. 341-344, 2008. https://doi.org/10.1016/j.cirp.2008.03.098
- Bielawski, M. and Beres, W., "Fe Modelling of Surface Stresses in Erosion-Resistant Coatings under Single Particle Impact," Wear, Vol. 262, No. 1-2, pp. 167-175, 2007. https://doi.org/10.1016/j.wear.2006.04.009
- Wensink, H. and Elwenspoek, M. C., "A Closer Look at the Ductile-Brittle Transition in Solid Particle Erosion," Wear, Vol. 253, No. 9-10, pp. 1035-1043, 2002. https://doi.org/10.1016/S0043-1648(02)00223-5
- Chen, Q. and Li, D. Y., "Computer Simulation of Solid Particle Erosion," Wear, Vol. 254, No. 3-4, pp. 203-210, 2003. https://doi.org/10.1016/S0043-1648(03)00006-1
- Bathe, K., Zhang, H., and Ji, S., "Finite Element Analysis of Fluid Flows Fully Coupled with Structural Interactions," Computers and Structures, Vol. 72, No. 1, pp. 1-16, 1999. https://doi.org/10.1016/S0045-7949(99)00042-5
- De, S., Hong, J., and Bathe, K., "On the Method of Finite Spheres in Applications: Towards the Use with Adina and in a Surgical Simulator," Computational Mechanics, Vol. 31, No. 1, pp. 27-37, 2003. https://doi.org/10.1007/s00466-002-0390-3
- Feng, J., Wang, D., and Liu, H., "Finite Element Simulation of Thermal Stress During Diffusion Bonding of Al2O3 Ceramic to Aluminium," Science and Technology of Welding and Joining, Vol. 8, No. 2, pp. 138-142, 2003. https://doi.org/10.1179/136217103225008838
Cited by
- 입자연마가공에서의 압력 속도 및 유체점도의 영향에 대한 고찰 vol.27, pp.1, 2010, https://doi.org/10.9725/kstle.2011.27.1.007
- 입자연마가공에서의 입자크기 및 충돌각의 영향에 대한 고찰 vol.27, pp.1, 2010, https://doi.org/10.9725/kstle.2011.27.1.034