열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제23권5호
  • /
  • Pages.269-276
  • /
  • 2010
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지
DOI QR코드

DOI QR Code

스테인리스강의 기계적 성질에 미치는 저온 플라즈마 질화처리조건의 영향

Effects of Low Temperature Plasma Nitriding Treatment on Mechanical Properties of Stainless Steel

  • Bin, Jeonguk (Division of Metallurgical Engineering, Pukyung National University) ;
  • Kim, Hangoon (Division of Metallurgical Engineering, Pukyung National University)
  • 투고 : 2010.08.03
  • 심사 : 2010.09.20
  • 발행 : 2010.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study has been carried out to the low temperature plasma nitriding treatment on the mechanical properties of stainless steel at temperature range between $400^{\circ}C$ and $500^{\circ}C$. It was found that there was precipitated to free CrN matrix below $400^{\circ}C$ and there was precipitated S-phase of STS 316L, ${\varepsilon}$-phase of STS 409L and ${\alpha}N$-phase of STS 420J2. STS 316L has formed relatively abundant CrN phase and ${\gamma}^{\prime}-Fe_4N$ phase at $500^{\circ}C$, alternatively STS 409L and STS 420J2 were more deeply nitrided than STS 316L at $500^{\circ}C$.

키워드

참고문헌

  1. Z.L. Zhang and T. Bell : Book-Inst. of Mat. 752 (2001) 1.
  2. O. Ozturk and D. L. Williamson: Surf. Coat. Technol. 158-159 (2002) 288. https://doi.org/10.1016/S0257-8972(02)00185-8
  3. H. Pelletier, P. Mille, D. Muller, J. P. Stoquert, A. Comet and J. J. Grob : Mat. Scie. with Ion Beams 178 (2001) 319.
  4. G. B. Stachowiak, G. W. Stachowiak and P. Evans: Wear 241 (2000) 220. https://doi.org/10.1016/S0043-1648(00)00379-3
  5. Z. Tek, M. A. Gungor, E. Cal, M. Sonugelen, C. Artunc and A. Oztarhan : Surf Coat. Technol. 158/159 (2002) 157. https://doi.org/10.1016/S0257-8972(02)00192-5
  6. T. Bacci, F. Borgioli, E. Galvanetto and G. Pradelli : Surf. Coat. Technol. 139 (2001) 251. https://doi.org/10.1016/S0257-8972(01)01010-6
  7. W. Mller, S. Parascandola, T. Telbizova, R. Gnzel and E. Richer: PBll 99 (2001) 73.
  8. T. Roux, A. Saker, C. Leroy, C. Frantz and H. Michel, Trait: Therm. 278 (1994) 61.
  9. N. Yasumaru, K. Tsuchida, E. Saji and T. Ibe : Mater. Trans., JIM 34 (1995) 696.
  10. G. J. Li, Q. Peng, C. Li, Y. Wang, J. Gao, S. Y. Chen, J. Wang and B. L. Shen : Sur. Coat. Technol. 202 (2008) 2749. https://doi.org/10.1016/j.surfcoat.2007.10.002
  11. C. X. Li, J. Georges and X. Y. Li : Surf. Eng. 18(6) (2002) 453. https://doi.org/10.1179/026708402225006240
  12. E. Menthe, K. -T. Rie, J. W. Schultze and S. Simson: Plasma Sur. Eng. 74-75 (1995) 412.
  13. S. J. Kim, J. S. Yoo, J. M. Preiest and M. P. Fewell : Surf. Coat. Technol. 163-164 (2003) 380. https://doi.org/10.1016/S0257-8972(02)00631-X
  14. C. E. Foerster; F. C. Serbena and S. L. R. da Silva : Intern. Conf, on Ion Beam Modi. of Mat. (2007) 732.
  15. C. F. M. Borges, S. Hennecke and E. Pfender : Surf. Coat. Technol. 123 (2000) 112. https://doi.org/10.1016/S0257-8972(99)00506-X
  16. E. De las Heras, G. Ybarra, P. Corengia, D.G. Santmaria, A. Garcia-Luis, M. Brizuela, P. Corengia, A. Cabo. N. Mingolo and S. Bruhl: Plasma Process. Polym. 4 (2007) S741 https://doi.org/10.1002/ppap.200731809
  17. C. X. Li and T. Bell: Wear 256 (2004) 1144. https://doi.org/10.1016/j.wear.2003.07.006
  18. K. -L. Hsu, T. M. Ahn and D. A. Rigney: Wear 60(1) (1980) 13. https://doi.org/10.1016/0043-1648(80)90247-1
  19. Y. T. Xi, D. X. Liu and D. Han : Sur. Coat. Technol. 202 (2008) 2577. https://doi.org/10.1016/j.surfcoat.2007.09.036