Journal of Welding and Joining

  • 제28권1호
  • /
  • Pages.60-65
  • /
  • 2010
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

490MPa급 플럭스코어드 와이어의 스패터, 흄, 미세조직 및 기계적 성질에 미치는 Al, Mn, Si의 영향

Effects of Al, Mn and Si Contents on Spatter, Fume, Microstructure and Mechanical Property with 490MPa Grade Flux Core Wire

  • 발행 : 2010.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is concerned with effects of Al, Mn and Si contents on spatter, fume, microstructure and mechanical property with 490MPa Grade Flux Core Wire(FCW). Ten kinds of FCW were fabricated by varying Mn, Si and Al contents and each FCW was weld for check the amount of spatter and fume generations, microstructures and mechanical property. Amount of spatter and fume generations was decreased with the increasing Si contents and decreasing by Al contents in FCW. And, their microstructure of weld metal were changed by Mn, Al and Si contents in FCW. With increasing of Al and Si, acicular ferrite was fine and volume fraction of acicula ferrite was increased. Thereby leading to improvement of Charpy impact property and strength.

키워드

참고문헌

  1. Chung Sik Yoon, Dong Uk Park and Doo Youn Park : A Study on the Content Variation of Metals in Welding Fumes, Kor. J. Env. Hlth. Soc, 29-2 (2002), 117-129 (in Korean)
  2. Chungsik Yoon : Welding Fume and Ohters from Welding Processes, Kor, J, Env, Thlth, 30-4 (2004), 320-328
  3. 김경중 : Flux Cored wire의 특성 및 사용상의 유의점, Journal of KWS, 6-3 (1988), 8-20 (in Korean)
  4. Kataoka Tokihiko, Ikeda Rinsei, Ono Moriaki, Yasuda Koichi and Hirata Yoshinori : Effect of REM Addition of Wire on $CO_2$ Gas Shiedled Arc Phenomenon, Journal of JWJS, 26-1 (2008), 37-41 (in Korean)
  5. Kataoka Tokihiko, Ikeda Rinsei and Yasuda Koichi : Influence of Minor Elements in Electrode Wire on Spattering Phoenomena in $CO_2$ Gas Shiedled Arc Welding, Journal of JWJS, 25-3 (2007), 410-415 (in Korean)
  6. H.B.Chae, J.H.Kim and S.C.Yang : Analysis of the Fume Generation Rates in the Flux Cored Arc Welding, International Journal of KWS, 1-1 (2001) 71-77 (in Korean)
  7. C.W.Yang, C.S.Kang, S.H.Hwang and K.J.Kim : The Effect of Silicon and Manganese on Mechanical Properties of Modelling Flux Cored Arc Welded Deposit, Journal of KWS, 8-2 (1990) (in Korean)
  8. Kataoka Tokihikio, Ikeda Rinsei, Yasuda Koichi and Hirata Yoshinori : Development of Low Spatter CO2 Arc Welding Process with High Frequency Pulse Current, Journal of JWJS, 25-4 (2007) 480-485 (in Korean)
  9. Kataoka Tokihikio, Ikeda Rinsei, and Yasuda Koichi : Development of Ultra-Low Spatter $CO_2$ Gas-shielded Arc Welding Process, JFE Technical Report, 10 (2007)
  10. Koshishi fusaki : Welding materials, Journal of JWS, 72-2 (2003) 108-111
  11. 박대식, 스에나가카즈유키, 김동수 : 저 Fume Flux-cored Wire의 개발, 대한용접학회 특별강연 및 학술발표대회 개요집 제1권 (1998) 239-241 (in Korean)
  12. T.K.Han, K.Y.Lee and J.S.Lim : Recent Developments and Weldability of Advanced High Strength Steels for Automotive Applications, Journal of KWJS, 27-2 (2009) 131-135 (in Korean) https://doi.org/10.5781/KWJS.2009.27.2.013
  13. 허만주 : 2009년 대한금속.재료학회 철강기술강좌 (2009) 31-51 (in Korean)