References
- 김현중, 김대준 (2001). "에폭시수지 접착제의 특성과 응용", 접착 및 계면, 기술강좌(3), 제2권, 제2호, pp 35-47.
- 박성완, 이장규 (2004). "접착이음의 강도평가에 대한 해석", 한국공작기계학회 2004 추계학술대회 논문집, pp 98-107.
- 안석환, 김진욱, 도재윤, 김현수, 남기우 (2005). "저속충격에 의한 복합재료 적층판의 손상", 한국해양공학회지, 제19권, 제1호, pp 39-43.
- 유종선, 이승희 (2000). "접착과 접착 메커니즘", 접착 및 계면, 기술강좌(1), 제1권, 제1호, pp 63-72.
- 오승규, 장철섭, 한준영, 이원 (2004). "초음파신호해석을 이용한 단순겹치기 접착이음의 강도평가", 대한기계학회지, 제22권, 제5호, pp 32-37.
- 이영상, 하진국, 이의수 (2008). "실험계획법을 이용한 아크릴 점착제의 점착력 최적화", 접착 및 계면 학회지, 제9권, 제1호, pp 22-27.
- 이원, 정의섭, 유영철 (1995). "피착체의 두께가 다른 단순겹치기 접착이음에 대한 응력특이성 파라미터의 해석", 한국자동차공학회 1995년 춘계학술대회 논문집, pp 16-22.
- Andruet, R.H., Dillard, D.A. and Holzer, S.M. (2001). "Twoand Three-dimensional Geometrical Nonlinear Finite Elements for Analysis of Adhesive Joints", International Journal of Adhesion & Adhesives, Vol 21, pp 17-34. https://doi.org/10.1016/S0143-7496(00)00024-5
- Avila, A.F. and Bueno, P.D.O. (2004). "Stress Analysis on a Wavy-lap Bonded Joint for Composites", International Journal of Adhesion & Adhesives, Vol 24, pp 407-414. https://doi.org/10.1016/j.ijadhadh.2003.12.001
- Carpenter, W.C. and Barsoum, R. (1989). "Two Finite Elements for Modeling the Adhesive in Bonded Configuration", Journal of Adhesives, Vol 30, pp 25-46. https://doi.org/10.1080/00218468908048192
- Goncalves, J.P.M., de Moura, M.F.S.F. and de Castro, P.M.S.T. (2002). "A Three-Dimensional Finite Element Models for Stress Analysis of Adhesive Joints", International Journal of Adhesion & Adhesives, Vol 22, pp 357-365. https://doi.org/10.1016/S0143-7496(02)00015-5
- Hellmanns, M., Bohm, S. and Dilger, K. (2006). "Manual Application of Adhesives", Journal of Adhesion and Interface, Vol 7, No 4, pp 24-27.
- Li, G. and Lee-Sullivan, P. (2001). "Finite Element and Experimental Studies on Single-Lap Balanced Joints in Tension", International Journal of Adhesion & Adhesives, Vol 21, pp 211-220. https://doi.org/10.1016/S0143-7496(00)00052-X
- Lucas, F.M. da Silva, Ramos, J.E., Figuiredo, M.V. and Strohaecker, T.R. (2006). "Influence of the Adhesive, the Adherend and the Overlap on the Single Lap Shear Strength", Journal of Adhesion and Interface, Vol 7, No 4, pp 1-9.
- Richardson, G., Crocombe, A.D. and Smith, P.A. (1993). "A Comparison of Two and Three-dimensional Finite Element Analysis of Adhesive Joints", International Journal of Adhesion & Adhesives, Vol 13, pp 193-200. https://doi.org/10.1016/0143-7496(93)90042-8
- Symietz, D. and Lutz, A. (2006). "High-performing Adhesive Bonding Fastening Technique For Automotive Body Structures", Journal of Adhesion and Interface, Vol 7, No 4, pp 60-64.
- Wooley, G.R. and Carver, D.R. (1971). "Stress Concentration Factors for Bonded Lap Joint", Journal of Aircraft, Vol 8, pp 817-820. https://doi.org/10.2514/3.44305