Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Effect of Austempering Treatment on Dynamic Characteristics of Brake Drums

오스템퍼링 처리가 브레이크 드럼의 동적 특성에 미치는 영향

  • Yim, K.B. (Dept. of Mechanical Engineering, Dongyang Technical College)
  • Published : 2010.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of austempering treatment on the dynamic properties of a brake drum was investigated to primarily evaluate the potential damping advantage of an AGI (austempered gray iron) drum over a PGI (pearlitic gray iron) drum. This investigation provides valuable information for brake noise reduction since the brake drum is most often the outstanding component that generates the noise of the brake assembly. Test results show that the AGI drum provided slightly larger damping values than the PGI drum for the first few major resonances observed. A finite element model of a drum was also developed to aid in studying its dynamic behavior. A good correlation was obtained between the analytical results and the actual measurement data.

Keywords

References

  1. Suzuki, Y. and Ohno, H., 1981, "A Study on Drum Brake Noise of Heavy Duty Vehicle," SAE 811399, pp. 287-292.
  2. Day, A. J. and Kim, S. Y., 1996, "Noise and Vibration analysis of an S-cam Drum Brake," J. Automobile Engineering, Vol. 210, pp. 35-43. https://doi.org/10.1243/PIME_PROC_1996_210_242_02
  3. Kang, H. Y., Yang, S. M., Kim, J. K., Han, K. S., and Lee, D. H., 2000, "Modeling and Analysis of Brake Judder of Middle Size Bus," Proc. of the KSMTE Autumn Conference, pp. 489-494.
  4. Kim, J. H., Kim, J. H., Bae, B. J., Lee, S. B., and Kim, T. J., 2005, "Squeal Noise Analysis and Reduction of Drum Brake Using Component Mode Synthesis," Trans. of KSNVE, Vol. 15, No. 1, pp. 72-80. https://doi.org/10.5050/KSNVN.2005.15.1.072
  5. Miller, E. J., 1969, "Damping Capacity of Pearlistic Gray Iron and Its Influence on Disk Brake Squeal Suppressions," SAE 690221, pp. 949-956.
  6. VanMaldegiam, M. D. and Rundman, K. B., 1986, "On the Structure and Properties of Austempered Gray Cast Iron," AFS Transactions, pp. 249-254.
  7. Han, D. W., Kim, Y. C., Son, Y. C., and Baik, S. H., 1999, "Effect of Austempering Treatment on Damping Capacity and Mechanical Properties in Gray Cast Iron," J. KSHT, Vol. 12, No. 2, pp. 108-116.
  8. Jang, S. H., Kim, S. M., Hwang, H. Y., Choi, Y. H., and Park, J. K., 2007, "Dynamic Characteristic Analysis of a Micro Milling Machine by Using F.E.M. and Impulse Hammer Test," Proc. of the KSMTE Autumn Conference, pp. 29-34.