References
- Bathe, K.J., Wilson, E.L. (1976) Numerical Methods in Finite Element Analysis, Prentice Hall, Englewood Cliffs.
- Belytschko, T. (1974) Transient Analysis, Structural Mechanics, Computer Programs, Surveys, Assessments, and Availability, Edited by Pilkey, W., Saczalski, K. and Schaeffer, H. University of Virginia Press, Charlottesville, Virginia, pp.255-276.
- Belytschko, T., Hughes, J.R., Bathe, K.J. (1996) Finite Element Procedures, Prentice-Hall, Englewood Cliffs.
- Choi, C., Jung, H. (1998) Adaptive Mesh Generation for Dynamic Finite element Analysis, J. Korean Soc. of Civil Eng.(in Korean), 18(I-2), pp.203-220.
- Choi, C.K., Yu, W.J. (1998) Adaptive Finite Element Wind Analysis with Mesh Refinement and Recovery (in Korean), Wind and Structures, 1, pp.111-125. https://doi.org/10.12989/was.1998.1.1.111
- Cook, R.D., Malkus, D.S., Plesha, M.E. (1989) Concepts and Applications of Finite Element Analysis, 3rd Ed. John Wiley & Sons, New York.
- de Las Casas, E.B. (1988) R-H Mesh Improvement Algorithms for the Finite Element Method, Ph.D. Dissertation, Purdue University, West Lafayette.
- Heesom, D., Mahdjoubi, L. (2001) Effect of Grid Resolution and Terrain Characteristics on Data from DTM, J. Comp. in Civil Eng., ASCE, 15(2), pp.137-143. https://doi.org/10.1061/(ASCE)0887-3801(2001)15:2(137)
- Hwang, S.W. (1988) A Study on the r-h Method in the Finite Element Method, Master's Thesis(in Korean), Inha University, Inchon.
- Jeong, Y.C., Yoon, C. (2003) Representative Strain Value Based Adaptive Mesh Generation for Plane Stress, Hongik J. Science and Tech., 7, pp.71-86.
- Jeong, Y.C., Yoon, C., Hong, S. (2003) Adaptive Mesh Generation Scheme for Planar Problems using Representative Strain Values for Error(in Korean), Proc., Korean Soc. Comp. Structural Eng., 16 (2-31), pp.403-409.
- Ladeveze, P., Oden, J.T., Editors. (1998) Advances in Adaptive Computational Methods in Mechanics Studies in Applied Mechanics, 47, Elsevier, Oxford.
- MacLeod, I.A. (2002) The Education of Structural Analyst, Proc., Asranet Symp., Asranet, Dept. of Naval Architecture and Marine Eng., Univ. of Glasgow and Strathclyde, London.
- McFee, S., Giannacopoulos, D. (2001) Optimal Discretizations in Adaptive Finite Element Electromagnetics, Int. J. Numer. Meth. Eng., 52(9), pp.939-978. https://doi.org/10.1002/nme.240
- Newmark, N.M. (1959) A Method of Computation for Structural Dynamics, J. Eng. Mech. Division, American Society of Civil Engineers, 85(EM3), pp.67-94.
- Ohnimus, S., Stein, E., Walhorn, E. (2001) Local Error Estimates of FEM for Displacements and Stresses in Linear Elasticity by Solving Local Neumann Problems, Int. J. Numer. Meth. Eng., 52(7), pp.727-746. https://doi.org/10.1002/nme.228
- Rafiq, M.Y., Easterbrook, D.J. (2005) Using the Computer to Develop a Better Understanding in Teaching Structural Engineering Behavior to Undergraduates, J. Comp. in Civil Eng., 19(1), pp.34-44. https://doi.org/10.1061/(ASCE)0887-3801(2005)19:1(34)
- Reddy, J.N. (1993) An Introduction to the Finite Element Method, 2nd Ed., McGraw-Hill, New York.
- Stampfle, M., Hunt, K.J., Kalkkuhl, J. (2001) Efficient Simulation of Parameter-Dependent Vehicle Dynamics, Int. J. Numer. Meth. Eng., 52(11), pp.1273-1299. https://doi.org/10.1002/nme.254
- Yoon, C. (2005) Adaptive Mesh Generation for Dynamic Finite Element Analysis(in Korean), J. Korean Soc. Civil Eng., 25(6A), pp.989-998.
- Yoon, C. (2009) Computer Aided Teaching of Structural Engineering Using Adaptive Schemes in the Finite Element Method, J. Korean Soc. Hazard Mitigation., 9(1), pp.9-13.
- Zhu, J.Z., Zienkiewicz, O.C., Hinton, E., Wu, J. (1991) A New Approach to the Development of Automatic Quadrilateral Mesh Generation, Int. J. Numer. Meth. Eng., 32, pp.849-866. https://doi.org/10.1002/nme.1620320411
- Zienkiewicz, O.C., Taylor, R.L., Zhu, J.Z. (2005) The Finite Element Method: Its Basis and Fundamentals, 6th Ed. Elsevier Butterworth-Heinemann, Oxford.
- Zienkiewcz, O.C., Zhu, J.Z. (1987) A Simple Error Estimator and Adaptive Procedure for Practical Engineering Analysis, Int. J. Numer. Meth. Eng., 24, pp.337-357. https://doi.org/10.1002/nme.1620240206