DOI QR코드

DOI QR Code

분포정수회로모델을 이용한 수직 접지전극의 접지임피던스의 분석

Analysis for the Grounding Impedance of Vertical Grounding Electrodes using the Distributed Parameter Circuit Model

  • 이복희 (인하대 IT공대 전기공학부) ;
  • 김종호 (인하대학교 대학원 전기공학과) ;
  • 최종혁 (인하대학교 대학원 전기공학과)
  • 투고 : 2010.02.09
  • 심사 : 2010.05.13
  • 발행 : 2010.06.01

초록

A grounding electrode has the transient grounding impedance characteristics against lightning surges. So the performance of grounding electrodes should be evaluated as a grounding impedance as well as the ground resistance. The frequency-dependent grounding impedance is varied with the shape and size of grounding electrode and is divided into both inductive and capacitive behaviors. This paper presents a theoretical analysis for the grounding impedance determined by the size of grounding electrode using the distributed parameter circuit model. EMTP and Matlab programs were used in calculating the frequency-dependent grounding impedances of vertical grounding electrodes. It was found that the frequency-dependent grounding characteristics of vertical grounding electrodes are characterized by the distributed parameters which are changed in the dimension of grounding electrodes.

키워드

참고문헌

  1. S. Visacro, "A Comprehensive Approach to the Grounding Response to Lightning Currents", IEEE Trans. Power Del., vol. 22. no. 1, pp.381-386, 2007. https://doi.org/10.1109/TPWRD.2006.876707
  2. H. Griffiths, A. M. Davies, "Effective Length of earth electrodes under high frequency and transient conditions", Proc. 25th International Conference on Lightning Protection(ICLP), pp.469-471, 2000.
  3. 조정현, 이복희, "임펄스 전류에 의한 매설지선의 과도 임피던스특성에 대한 모의해석", 전기학회 논문지, vol.58, no. 10, pp.1861-1868, 2009.
  4. L. Grcev and M. Popov, "On High-Frequency Circuit Equivalents of a Vertical Ground Rod", IEEE Trans. Power Del., Vol. 20. No. 2, pp.1598-1603, 2005. https://doi.org/10.1109/TPWRD.2004.838460
  5. R. Velazquez and D. Mukhedkar,, "Analytical modeling of grounding electrodes transient behavior", IEEE Trans. Power App. Syst., vol. PAS-103, no. 6, pp.1314-1322, 1984. https://doi.org/10.1109/TPAS.1984.318465
  6. M. I. Lorentzou, N. D. Hatziargyriou, and B. C. Papadias, "Time domain analysis of grounding electrodes impulse response", IEEE Trans. Power Del., vol.18, no. 2, pp.517-524, 2003.
  7. S. Devgan and E. R. Whitehead, "Analytical models for distributed grounding systems", IEEE Trans. Power App. Syst., vol.PAS-92, no. 5, pp.1763-1770, 1973. https://doi.org/10.1109/TPAS.1973.293725
  8. M. I. Lorentzou, N. D. Hatziargriou, "Transmission Line Modeling of Grounding Electrodes and Calculation of their Effective Length under Impulse Excitation", Proc. International Conference on Power Systems Transients, paper no. IPST05-239, 2005.
  9. P. Llovera, J. A. Lliso, A. Quijano, V. Fuster, "High frequency measurements of grounding impedance on resistive soils", Proc. 28th ICLP, vol. 1, pp.727-729, 2006.
  10. 이복희, "전력시스템공학", 인하대학교 출판부, pp.137-143, 2007.
  11. M. E. Almeida and M. T. Correia de Barros "Fundamental considerations on long ground electrodes design", Proc. 13th International Symposium on High Voltage Engineering, pp.241-244, 2003.
  12. Bok-Hee Lee, Jeong-Hyun Joe and Jong-Hyuk Choi, "Simulation of Frequency-dependent Impedance of Ground Rods Considering Multi-layered Soil Structures", Journal of Electrical Engineering & Technology, vol.4, nNo.4, pp.531-537, 2009. https://doi.org/10.5370/JEET.2009.4.4.531
  13. IEEE Std 81.2-1991, "IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems," IEEE Inc., pp.9-22, 1991.