Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

DFIG Wind Power System with a DDPWM Controlled Matrix Converter

  • Lee, Ji-Heon (Department of Electrical Engineering Myongji University) ;
  • Jeong, Jong-Kyou (Department of Electrical Engineering Myongji University) ;
  • Han, Byung-Moon (Department of Electrical Engineering Myongji University) ;
  • Choi, Nam-Sup (Division of Electrical Electronic Communication and Computer Engineering, Chonnam National University) ;
  • Cha, Han-Ju (Department of Electrical Engineering, Chungnam National University)
  • Received : 2010.01.13
  • Accepted : 2010.03.09
  • Published : 2010.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a new doubly-fed induction generator (DFIG) system using a matrix converter controlled by direct duty ratio pulse-width modulation (DDPWM) scheme. DDPWM is a recently proposed carrier based modulation strategy for matrix converters which employs a triangular carrier and voltage references in a voltage source inverter. By using DDPWM, the matrix converter can directly and effectively generate rotor voltages following the voltage references within the closed control loop. The operation of the proposed DFIG system was verified through computer simulation and experimental works with a hardware simulator of a wind power turbine, which was built using a motor-generator set with vector drive. The simulation and experimental results confirm that a matrix converter with a DDPWM modulation scheme can be effectively applied for a DFIG wind power system.

Keywords

References

  1. Dr. Eggaert and S. Franko, "Innovative Variable Speed Drive for Doubly Fed Wind Turbine Application," 2002 Global Wind Power Conference, July 2002.
  2. Chad Abbey and Geza Joos, "Optimal Reactive Power Allocation in a Wind Powered Doubly-Fed Induction Generator," 2004 IEEE Power Engineering General Meeting, pp. 1492-1496, June 2004.
  3. Rajib Datta and V. T. Ranganathan, "A Method of Tracking the Peak Power Points for a Variable Speed Wind Energy Conversion System," IEEE Transactions on Energy Conversion, Vol. 18. No. 1, pp. 163-168, March 2003. https://doi.org/10.1109/TEC.2002.808346
  4. L. Zhang and C. Watthanasarn, "A Matrix Converter Excited Doubly-Fed Induction Machine as A Wind Power Generator," IEE 7th International Conference on Power Electronics and Variable Speed Drives, pp. 532-537, London, Sept. 1998.
  5. K. Ghedamsi, D. Aouzellag and E. Berkouk, "Application of Matrix Converter for Variable Speed Wind Turbine Driving a Doubly-Fed Induction Generator," International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2006, pp. 38-42, 2006.
  6. S. Pinto, L. Aparicio and P. Esteves, "Direct Controlled Matrix Converters in Variable Speed Wind Energy Generation Systems," International Conference on Power Engineering 2007, Setubal, Portugal, pp. 654-659, April 12-14, 2007.
  7. Lie Xu, Dawei Zhi and Barry W. Williams, "Predictive Current Control of Doubly Fed Induction Generators," IEEE Transactions on Industrial Electronics, Vol. 56. No.10, pp. 4143-4153, October 2009. https://doi.org/10.1109/TIE.2009.2017552
  8. Roberto Cárdenas, Ruben Pena, German Tobar, Jon Clare, Patrick Wheeler and Greg Asher, "Stability Analysis of a Wind Energy Conversion System based on a Doubly Fed Induction Generator fed by a Matrix Converter," IEEE Transactions on Industrial Electronics, Vol. 56. No. 10, pp. 4194-4206, October 2009. https://doi.org/10.1109/TIE.2009.2027923
  9. P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham and A. Weinstein, "Matrix converters: a technology review," Industrial Electronics, IEEE Transactions on, Vol. 49, No. 2, pp. 276-288, 2002. https://doi.org/10.1109/41.993260
  10. Yulong Li, Nam-Sup Choi, Byung-Moon Han, Kyung-Min Kim, Buhm Lee and Jun-Hyub Park, "Direct duty ratio pulse width modulation method for matrix converters," International Journal of Control, Automation, and Systems, Vol. 6, No. 5, pp. 660-669, October, 2008.

Cited by

  1. DC Micro-Grid Operational Analysis with a Detailed Simulation Model for Distributed Generation vol.11, pp.3, 2011, https://doi.org/10.6113/JPE.2011.11.3.350
  2. Analysis and simulation of a six-phase matrix converter vol.21, pp.3, 2013, https://doi.org/10.1002/cae.20496
  3. Four-Leg-Based Fault-Tolerant Matrix Converter Schemes Based on Switching Function and Space Vector Methods vol.59, pp.1, 2012, https://doi.org/10.1109/TIE.2011.2143378