Abstract
Controlled low strength material (CLSM) is a flowable mixture and does not need to be compacted. It is produced by mixing portland cement, fly ash, fine aggregates, water and chemical admixtures. Sand is the most commonly used fine aggregates in the conventional CLSM, but it is getting more and more difficult to obtain sand in Korea. In this study, the characteristics of unconfined compressive strength, flow and applicability of a new CLSM that is produced by mixing of pond ash, fly ash, water, cement are examined. An unconfined compressive strength satisfies the standard unconfined compressive strength (0.5~1.0 MPa) were obtained when the mixture ratio of pond ash and fly ash is 30:70~70:30, cement ratio is 3.0~5.0%, and water content is 31~34%. The results of flow test indicate that the mixture ratio of pond ash and fly ash which satisfy the standard How value (0.2 m) is 30:70~70:30.
저강도고유동화재는 다짐이 필요 없고 유동성이 큰 물질로 일반적으로 시멘트, 비회, 잔골재, 물, 혼화제 등을 혼합하여 만들어진다. 기존의 CLSM은 잔골재로 모래를 사용하고 있으나 때문에 모래가 점점 구하기 어려워지는 현재 우리나라 실정에서는 그대로 사용하기 곤란하다. 본 연구에서는 모래대신 매립회를 이용하여 매립회, 비회, 시멘트, 물의 혼합물로 만들어진 CLSM의 강도특성을 조사하여 사용가능성을 제시하고자 한다. 일축압축강도실험결과 기준 일축압축강도(0.5MPa~1.0MPa)를 만족하는 배합비는 매립회와 비회의 혼합비 0:100~70:30, 시멘트비 3.0~5.0%, 함수비 31~34%로 나타났다. 플로우시험 결과 매립회와 비회를 혼합하여 사용하는 모든 경우(매립회와 비회의 비 30:70~70:30)에서 기준 플로우값(0.2m)를 만족하였다.