DOI QR코드

DOI QR Code

Capacity design considerations for RC frame-wall structures

  • Sullivan, Timothy J. (Department of Structural Mechanics, Universita degli Studi di Pavia)
  • 투고 : 2010.04.30
  • 심사 : 2010.07.30
  • 발행 : 2010.12.25

초록

There are several important considerations that need to be made in the capacity design of RC frame-wall structures. Capacity design forces will be affected by material overstrength, higher mode effects and secondary loadpaths associated with the 3-dimensional structural response. In this paper, the main issues are identified and different means of predicting capacity design forces are reviewed. In order to ensure that RC frame-wall structures perform well it is explained that the prediction of the peak shears and moments that develop in the walls is particularly important and unfortunately very challenging. Through examination of a number of case study structures it is shown that there are a number of serious limitations with capacity design procedures included in current codes. The basis and potential of alternative capacity design procedures available in the literature is reviewed, and a new simplified capacity design possibility is proposed. Comparison with the results of 200 NLTH analyses of frame-wall structures ranging from 4 to 20 storeys suggest that the new method is able to predict wall base shears and mid-height wall moments reliably. However, efforts are also made to highlight the uncertainty with capacity design procedures and emphasise the need for future research on the subject.

키워드

참고문헌

  1. Aktan, A.E., Bertero, V.V., Chowdhury, A.A. and Nagashima, T. (1983), "Experimental and analytical predictions of the mechanical characteristics of a 1/5-scale model of a 7-story R/C frame-wall building structure", UCB/EERC - 83/13, Earthquake Engineering Research Center, University of California, Berkeley, CA. USA.
  2. ASCE/SEI 7-05 (2005), Minimum design loads for buildings and other structures, American Society of Civil Engineers, 388.
  3. Bertero, V., Aktan, A.E., Charney, F. and Sause, R. (1985), "US-Japan cooperative earthquake research program: earthquake simulation tests and associated studies of a 1/5th-scale model of a 7-story reinforced concrete test structure", UCB/EERC - 84/05, Earthquake Engineering Research Center, University of California, Berkeley, CA. USA.
  4. Beyer, K., Dazio, A. and Priestley, M.J.N. (2008), "Seismic design of torsionally eccentric buildings with RC Ushaped walls", Research Report ROSE-2008/03, IUSS press, Pavia, Italy, 303.
  5. Carr, A.J. (2004), Ruaumoko3D - a program for inelastic time-history analysis, Department of Civil Engineering, University of Canterbury, New Zealand.
  6. CEN EC8 (2004), Eurocode 8 - design provisions for earthquake resistant structures, EN-1998-1:2004: E, Comite Europeen de Normalization, Brussels, Belgium.
  7. Chopra, A.K. (2000), Dynamics of structures, Pearson Education, USA.
  8. Ciaponi, C. (2010), "Design verification of a displacement-based designed three dimensional wall-steel frame building", Masters Dissertation, ROSE School, Pavia, Italy.
  9. Dazio, A. (2000), "Seismic design of buildings with structural walls", Ph.D. thesis, Zurich, Switzerland. (in German)
  10. E-Defense (2009), National Research Institute for Earth Science and Disaster Prevention, Hyogo Earthquake Engineering Research Center, Blind Analysis Contest web site: http://www.blind-analysis.jp/index_e.html, version updated December, 07.
  11. Elnashai, A.S., Spencer, B.F., Kuchma, D.A., Yang, G., Carrion, J., Gan, Q. and Kim S.J. (2006), The multi-axial full-scale sub-structured testing and simulation (MUST-SIM) facility at the university of illinois at Urbana- Champaign, Chapter of book on Advances in Earthquake Engineering for Urban Risk Reduction, Springer Netherlands, 66, 245-260.
  12. Fenwick, R.C. and Megget, L.M. (1993), "Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges", Bull. NZ Nat. Soc. Earthq. Eng., 26(1), 28-41.
  13. Goodsir, W.J. (1985), "The design of coupled frame-wall structures for seismic actions", Research Report No. 85-8, Department of Civil Engineering, University of Canterbury, Christchurch, NZ, 383.
  14. Kabeyasawa, T. (1987), "Ultimate-state design of reinforced concrete wall-frame structures", Proceedings of Pacific Conference on Earthquake Engineering, Wairakei, New Zealand, 1.
  15. Lopes, M.S. and Bento, R. (2001), "Seismic behaviour of dual systems with column hinging", Earthq. Spectra, 17(4), 657-677. https://doi.org/10.1193/1.1423655
  16. NZS3101:Part 1:2006 (2006), New Zealand standard, concrete structures standard, Part 1 - The design of concrete structures, Standards Council of New Zealand.
  17. Panagiotou, M. and Restrepo J.I. (2009), "Dual-plastic hinge design concept for reducing higher-mode effects on high-rise cantilever wall buildings", Earthq. Eng. Struct. Dyn., 38(12), 1359-1380. https://doi.org/10.1002/eqe.905
  18. Papazoglou, A.J. and Elnashai, A.S. (1996), "Analytical and field evidence of the damaging effect of vertical earthquake ground motion", Earthq. Eng. Struct. Dyn., 25, 1109-1137. https://doi.org/10.1002/(SICI)1096-9845(199610)25:10<1109::AID-EQE604>3.0.CO;2-0
  19. Park, R. and Paulay, T. (1975), Reinforced concrete structures, John Wiley & Sons, New York, 769.
  20. Paulay, T. and Goodsir, W.J. (1986), "The capacity design of reinforced concrete hybrid structures for multistorey buildings", Bull. NZ Nat. Soc. Earthq. Eng., 19(1), 1-17.
  21. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Direct displacement-based seismic design, IUSS Press, Pavia, Italy, 720.
  22. Priestley, M.J.N. and Amaris, A. (2002), Dynamic amplification of seismic moments and shear forces in cantilever walls, Report No. ROSE 2002/01, IUSS Press: www.iusspress.it, 86.
  23. Restrepo, J., Conte, J.P. and Panagiotou, M. (2010), "The design and shake table testing of a full-scale 7-storey reinforced concrete cantilever wall", Proceedings of the 2010 NZSEE conference.
  24. Rodriguez, M.E., Restrepo, J.I. and Carr, A.J. (2002), "Earthquake-induced floor horizontal accelerations in buildings", Earthq. Eng. Struct. Dyn., 31, 693-718. https://doi.org/10.1002/eqe.149
  25. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2006), Seismic design of frame-wall structures, Research Report ROSE-2006/02, IUSS press: www.iusspress.it, 303.
  26. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2008), "Estimating the higher mode response of ductile structures", J. Earthq. Eng., 12(3), 456-472. https://doi.org/10.1080/13632460701512399
  27. Wiebe, L. and Christopoulos, C. (2009), Mitigation of higher mode effects in base-rocking systems by using multiple rocking sections, Research report ROSE 2009/01, IUSS press, Pavia, 283.

피인용 문헌

  1. Earthquake resistance of structural walls confined by conventional tie hoops and steel fiber reinforced concrete vol.7, pp.5, 2014, https://doi.org/10.12989/eas.2014.7.5.843
  2. The need for upgrading the seismic performance objectives vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.401
  3. Different macroscopic models for slender and squat reinforced concrete walls subjected to cyclic loads vol.7, pp.5, 2014, https://doi.org/10.12989/eas.2014.7.5.877
  4. Technical Note: Practical Challenges Facing the Selection of Conditional Spectrum-Compatible Accelerograms vol.21, pp.1, 2017, https://doi.org/10.1080/13632469.2016.1157527
  5. Capacity Design of Coupled RC Walls vol.18, pp.5, 2014, https://doi.org/10.1080/13632469.2014.904255
  6. Comparative in-plane pushover response of a typical RC rectangular wall designed by different standards vol.7, pp.5, 2014, https://doi.org/10.12989/eas.2014.7.5.667
  7. Inelastic Higher-Mode Response in Reinforced Concrete Wall Structures vol.31, pp.3, 2015, https://doi.org/10.1193/051213EQS123M
  8. A cantilever beam analogy for quantifying higher mode effects in multistorey buildings vol.44, pp.11, 2015, https://doi.org/10.1002/eqe.2549
  9. On the Seismic Response of the Faculty of Architecture and Engineering Building at Tohoku University vol.32, pp.1, 2016, https://doi.org/10.1193/053013EQS139M
  10. Design in shear of reinforced concrete short columns vol.4, pp.3, 2010, https://doi.org/10.12989/eas.2013.4.3.265
  11. A simplified method for evaluation of seismic displacement of reinforced concrete frame buildings vol.4, pp.2, 2010, https://doi.org/10.1080/24705314.2019.1603190
  12. Experimental Evaluation of Inelastic Higher-Mode Effects on the Seismic Behavior of RC Structural Walls vol.146, pp.4, 2010, https://doi.org/10.1061/(asce)st.1943-541x.0002509