DOI QR코드

DOI QR Code

Prediction of ECC tensile stress-strain curves based on modified fiber bridging relations considering fiber distribution characteristics

  • 투고 : 2009.10.28
  • 심사 : 2010.04.12
  • 발행 : 2010.10.25

초록

This paper presents a prediction and simulation method of tensile stress-strain curves of Engineered Cementitious Composites (ECC). For this purpose, the bridging stress and crack opening relations were obtained by the fiber bridging constitutive law which is quantitatively able to consider the fiber distribution characteristics. And then, a multi-linear model is employed for a simplification of the bridging stress and crack opening relation. In addition, to account the variability of material properties, randomly distributed properties drawn from a normal distribution with 95% confidence are assigned to each element which is determined on the basis of crack spacing. To consider the variation of crack spacing, randomly distributed crack spacing is drawn from the probability density function of fiber inclined angle calculated based on sectional image analysis. An equation for calculation of the crack spacing that takes into quantitative consideration the dimensions and fiber distribution was also derived. Subsequently, a series of simulations of ECC tensile stress-strain curves was performed. The simulation results exhibit obvious strain hardening behavior associated with multiple cracking, which correspond well with test results.

키워드

과제정보

연구 과제 주관 기관 : Korea Science and Engineering Foundation (KOSEF)

참고문헌

  1. Aveston, J., Cooper, G.A. and Kelly, A. (1971), "Single and multiple fracture", In the Properties of Fiber Composites, Guildford, UK: IPC Science and Technology Press, P. 15-26.
  2. Aveston, J. and Kelly, A. (1973), "Theory of multiple fracture of fibrous composites", J. Mater. Sci., 8, 352-362. https://doi.org/10.1007/BF00550155
  3. Aveston, J., Mercer, R.A. and Sillwood, J.M. (1974), "Fiber reinforced cements-scientific foundations for specifications, in composites-standards", Testing and Design, Proceedings of National Physical Laboratory Conference, UK, p. 93-103.
  4. Deng, Z. and Li, J. (2007), "Tension and impact behaviors of new type fiber reinforced concrete", Comput. Concrete, 4(1), 19-32. https://doi.org/10.12989/cac.2007.4.1.019
  5. Kanda, T. and Li, V.C. (1998), "Multiple cracking sequence and saturation in fiber reinforced cementitious composites", Concrete Res. Technol., 9(2), 1-15.
  6. Kanda, T., Lin, Z. and Li, V.C. (2000), "Tensile stress-strain modeling of pseudo strain-hardening cementitious composites", J. Mater. Civil Eng. - ASCE, 12(2), 147-156. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(147)
  7. Kim, J.S., Kim, J.K., Ha, G.J. and Kim, Y.Y. (2007), "Tensile and fiber dispersion performance of ECC (Engineered Cementitious Composite) produced with slag particles", Cement Concrete Res., 37(7), 1096-1105. https://doi.org/10.1016/j.cemconres.2007.04.006
  8. Lee, B.Y., Kim, J.K., Kim, J.S., and Kim, Y.Y. (2009a), "Quantitative evaluation technique of PVA (Polyvinyl Alcohol) fiber dispersion in engineered cementitious composites," Cement Concrete Comp., 31(6), 408-417. https://doi.org/10.1016/j.cemconcomp.2009.04.002
  9. Lee, B.Y. Kim, Y.Y. and Kim, J.K. (2009b), "Fiber bridging characteristic of PVA-ECC evaluated based on the sectional image analysis", Proceedings of ICCES'09, Phuket, Thailand, 642-647.
  10. Leung, C.K.Y. (1996), "Design criteria for pseudoductile fiber-reinforced composites", J. Eng. Mech. - ASCE, 122(1), 10-14. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:1(10)
  11. Li, V.C. and Leung, K.Y. (1992), "Steady-state and multiple cracking of short random fiber composites", J. Eng. Mech. - ASCE, 118(11), 2246-2264. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:11(2246)
  12. Li, V.C., Wang, Y. and Backer, S. (1990), "Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix", Compos., 21(2), 132-140. https://doi.org/10.1016/0010-4361(90)90005-H
  13. Li, V.C., Wang, S. and Wu C. (2001), "Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)", ACI Mater. J., 98(6), 483-92.
  14. Li, V.C., Wu, C., Wang, S., Ogawa, A. and Saito, T. (2002), "Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)", ACI Mater. J., 99(5), 463-472.
  15. Roth, M.J., Slawson, T.R. and Flores, O.G. (2010), "Flexural and tensile properties of a glass fiber-reinforced ultra-high-strength concrete: an experimental, micromechanical and numerical study", Comput. Concrete, 7(2), 169-190. https://doi.org/10.12989/cac.2010.7.2.169
  16. Torigoe, S., Horikoshi, T. and Ogawa, A. (2003), "Study on evaluation method for PVA fiber distribution in engineered cementitious composite", J. Adv. Concrete Technol., 1(3), 265-268. https://doi.org/10.3151/jact.1.265
  17. Vincent, L. (1993), "Morphological grayscale reconstruction in image analysis: applications and efficient algorithms", IEEE T. Image Process., 2(2), 176-201. https://doi.org/10.1109/83.217222
  18. Vincent, L. and Soille, P. (1991), "Watesheds in digital spaces: an efficient algorithm based on immersion simulations", IEEE T. Pattern Anal., 13(6), 583-598. https://doi.org/10.1109/34.87344
  19. Wu, C. (2001), "Micromechanical tailoring of PVA-ECC for structural application", Ph. D. Thesis, University of Michigan, 2001.
  20. Wu, H.C. and Li, V.C. (1992), "Snubbing and bundling effects on multiple crack spacing of discontinuous random fiber-reinforced brittle matrix composites", J. Am. Ceram. Soc., 75(12), 3487-3489. https://doi.org/10.1111/j.1151-2916.1992.tb04457.x
  21. Yang, E.H., Wang, S., Yang, Y. and Li, V.C. (2008), "Fiber-bridging constitutive law of engineered cementitious composites", J. Adv. Concrete Tech., 6(1), 181-193. https://doi.org/10.3151/jact.6.181
  22. Yang, J. and Fischer, G. (2005), "Investigation of the fiber bridging stress-crack opening relationship of fiber reinforced cementitious composites", International RILEM Workshop on High Performance Fiber Reinforced Cementitious Composites (HPFRCC) in Structural Applications, Honolulu, Hawai'I, 23-26 May.

피인용 문헌

  1. Flexural performance and fiber distribution of an extruded DFRCC panel vol.10, pp.2, 2012, https://doi.org/10.12989/cac.2012.10.2.105
  2. Towards a model of dry shear keyed joints: modelling of panel tests vol.10, pp.5, 2012, https://doi.org/10.12989/cac.2012.10.5.469
  3. Plastic Hinge Rotation Capacity of Reinforced HPFRCC Beams vol.141, pp.2, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000858
  4. Stress-strain behavior and toughness of high-performance steel fiber reinforced concrete in compression vol.11, pp.2, 2013, https://doi.org/10.12989/cac.2013.11.2.149
  5. Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review vol.73, 2016, https://doi.org/10.1016/j.cemconcomp.2016.08.001
  6. Direct tensile properties of engineered cementitious composites: A review vol.165, 2018, https://doi.org/10.1016/j.conbuildmat.2017.12.124
  7. The application of general self-consistent model on mechanical behaviour of fibre-reinforced cementitious composites vol.146, 2017, https://doi.org/10.1016/j.conbuildmat.2017.04.045
  8. Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials vol.9, pp.12, 2016, https://doi.org/10.3390/ma9010042
  9. Increasing the flexural capacity of RC beams using partially HPFRCC layers vol.16, pp.4, 2015, https://doi.org/10.12989/cac.2015.16.4.545
  10. Stress-strain relationships for steel fiber reinforced self-compacting concrete vol.46, pp.2, 2010, https://doi.org/10.12989/sem.2013.46.2.295
  11. MODELLING OF TIME-DEPENDENT BEHAVIOR OF SHCC BY USING MULTI-LAYERED MICROPLANE MODEL vol.69, pp.1, 2010, https://doi.org/10.14250/cement.69.580
  12. Tensile strain-hardening behaviors and crack patterns of slag-based fiber-reinforced composites vol.21, pp.3, 2018, https://doi.org/10.12989/cac.2018.21.3.231
  13. Study of Strain-Hardening Behaviour of Fibre-Reinforced Alkali-Activated Fly Ash Cement vol.12, pp.23, 2010, https://doi.org/10.3390/ma12234015
  14. Methodology for predicting the properties of cement composites at different scales vol.72, pp.5, 2020, https://doi.org/10.1680/jmacr.18.00246
  15. Temperature Impact on Engineered Cementitious Composite Containing Basalt Fibers vol.11, pp.15, 2010, https://doi.org/10.3390/app11156848