DOI QR코드

DOI QR Code

Cost optimization of high strength concretes by soft computing techniques

  • Ozbay, Erdogan (Civil Engineering Department, Mustafa Kemal University) ;
  • Oztas, Ahmet (Civil Engineering Department, Epoka University) ;
  • Baykasoglu, Adil (Industrial Engineering Department, University of Gaziantep)
  • 투고 : 2009.06.24
  • 심사 : 2010.01.28
  • 발행 : 2010.06.25

초록

In this study 72 different high strength concrete (HSC) mixes were produced according to the Taguchi design of experiment method. The specimens were divided into four groups based on the range of their compressive strengths 40-60, 60-80, 80-100 and 100-125 MPa. Each group included 18 different concrete mixes. The slump and air-content values of each mix were measured at the production time. The compressive strength, splitting tensile strength and water absorption properties were obtained at 28 days. Using this data the Genetic Programming technique was used to construct models to predict mechanical properties of HSC based on its constituients. These models, together with the cost data, were then used with a Genetic Algorithm to obtain an HSC mix that has minimum cost and at the same time meets all the strength and workability requirements. The paper describes details of the experimental results, model development, and optimization results.

키워드

참고문헌

  1. Al-Tabtabai, H. and Alex, P.A. (1999), "Using genetic algorithm to solve optimization problems in construction", Eng. Constr. Architect. Manage., 6(2), 121-132. https://doi.org/10.1108/eb021105
  2. Ashby, M.F. (2000), "Multi-objective optimization in material design and selection", Acta Mater., 48, 359-369. https://doi.org/10.1016/S1359-6454(99)00304-3
  3. Bhatti, M.A. (2000), Practical optimization methods: with mathematica applications, Springer-Verlag.
  4. Bliss, D. and Larsen, L. (2006), Surviving the Pakistan earthquake: perceptions of the affected one year later, Fritz Institute.
  5. Castilho, V.C., Nicoletti, M.C. and Debs, M.K. (2005), "An investigation of the use of three selection-based genetic algorithm families when minimizing the production cost of hollow core slabs", Comput. Method. Appl. M., 194(45-47), 4651-4667. https://doi.org/10.1016/j.cma.2004.12.008
  6. Choi, C.K. and Kim, S.H. (1989), "Coupled use of reduced integration and nonconforming modes in improving quadratic plate element", Int. J. Numer. Meth. Eng., 28(4), 1909-1928. https://doi.org/10.1002/nme.1620280814
  7. Chung, H.P., Woo, I.L., Woo, S.H. and Alain, V. (2004), "Simultaneous optimization of composite structures considering mechanical performance and manufacturing cost", Compos. Struct., 65, 117-127. https://doi.org/10.1016/j.compstruct.2003.10.010
  8. Ferreira, C. (2001), "Gene expression programming: a new adaptive algorithm for solving problems", Complex Syst., 13(2), 87-129.
  9. Ferreira, C. (2002), Gene expression programming: mathematical modeling by an artificial intelligence.
  10. Goldberg, D. (1989), Genetic algorithms in search, optimization and machine learning, Addison-Welsley, Reading, MA.
  11. Karihaloo, B.L. and Kornbak, D.L. (2001), "Optimization techniques for the design of high-performance fibrereinforced concrete", Struct. Multidiscip., 21, 32-39. https://doi.org/10.1007/s001580050165
  12. Muthukumar, M. and Mohan D. (2004), "Optimization of mechanical properties of polymer concrete and mix design recommendation based on design of experiments", J. Appl. Polym. Sci., 94, 1107-1116. https://doi.org/10.1002/app.21008
  13. Ozkul, H. and Ozta, A. (1998), "Adana deprem aratrma raporu", Hazr Beton Dergisi TRMCA, 5(28), 40-42. (in Turkish)
  14. Ozta, A. (2003), "Bingol depremi beton aratrma raporu", Hazr Beton Dergisi TRMCA, 10(56), 93-95. (in Turkish)
  15. Sahab, M.G., Ashour, A.F. and Toropov, V.V. (2005), "Cost optimization of reinforced concrete flat slab buildings", Eng. Struct., 27, 313-322. https://doi.org/10.1016/j.engstruct.2004.10.002

피인용 문헌

  1. Polynomial modeling of confined compressive strength and strain of circular concrete columns vol.11, pp.6, 2013, https://doi.org/10.12989/cac.2013.11.6.603
  2. Development of optimum design curves for reinforced concrete beams based on the INBR9 vol.18, pp.5, 2016, https://doi.org/10.12989/cac.2016.18.5.983
  3. Cost optimization of reinforced high strength concrete T-sections in flexure vol.49, pp.1, 2014, https://doi.org/10.12989/sem.2014.49.1.065
  4. Knowledge-based learning for modeling concrete compressive strength using genetic programming vol.23, pp.4, 2010, https://doi.org/10.12989/cac.2019.23.4.255
  5. Minimum cost design of RCMRFs based on consistent approximation method vol.26, pp.1, 2020, https://doi.org/10.12989/cac.2020.26.1.001
  6. A new formulation for strength characteristics of steel slag aggregate concrete using an artificial intelligence-based approach vol.27, pp.4, 2010, https://doi.org/10.12989/cac.2021.27.4.333