Computers and Concrete

  • 제7권2호
  • /
  • Pages.169-190
  • /
  • 2010
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural and tensile properties of a glass fiber-reinforced ultra-high-strength concrete: an experimental, micromechanical and numerical study

  • Roth, M. Jason (U.S. Army Engineer Research and Development Center) ;
  • Slawson, Thomas R. (U.S. Army Engineer Research and Development Center) ;
  • Flores, Omar G. (U.S. Army Engineer Research and Development Center)
  • 투고 : 2009.07.31
  • 심사 : 2009.09.21
  • 발행 : 2010.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The focus of this research effort was characterization of the flexural and tensile properties of a specific ultra-high-strength, fiber-reinforced concrete material. The material exhibited a mean unconfined compressive strength of approximately 140 MPa and was reinforced with short, randomly distributed alkali resistant glass fibers. As a part of the study, coupled experimental, analytical and numerical investigations were performed. Flexural and direct tension tests were first conducted to experimentally characterize material behavior. Following experimentation, a micromechanically-based analytical model was utilized to calculate the material's tensile failure response, which was compared to the experimental results. Lastly, to investigate the relationship between the tensile failure and flexural response, a numerical analysis of the flexural experiments was performed utilizing the experimentally developed tensile failure function. Results of the experimental, analytical and numerical investigations are presented herein.

키워드

참고문헌

  1. ABAQUS/CAE, Version 6.5-4. (2005), SIMULIA, Providence, RI.
  2. ABAQUS, Inc. (2004a), Version 6.5 Analysis User's Manual, Section 11.5.3, ABAQUS Online Documentation, Version 6.5-1.
  3. ABAQUS, Inc. (2004b), Version 6.5 Theory Manual, Section 4.5.2, ABAQUS Online Documentation, Version 6.5-1.
  4. ACI Committee 549 (2004), "Report on thin reinforced cementitous products", ACI 549.29-04, American Concrete Institute, Farmington Hills, MI.
  5. ACI Committee 544. (1996), "Report on fiber reinforced concrete", ACI 544.1R-96, American Concrete Institute, Farmington Hills, MI.
  6. Akers, S.A., Green, M.L. and Reed, P.A. (1998), "Laboratory characterization of very high-strength fiber-reinforced concrete", Technical Report SL-98-10, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, MS.
  7. ASTM C 109-07, "Standard test method for compressive strength of hydraulic cement mortars (using 2-in. [or 50-mm] cube specimens)", ASTM International, West Conshohocken, PA, 19428.
  8. ASTM C 947-03, "Test method for flexural properties of thin-section glass-fiber reinforced concrete (using simple beam with third-point loading)", ASTM International, West Conshohocken, PA, 19428.
  9. Balaguru, P., Narahari, R. and Patel, M. (1992), "Flexural toughness of steel fiber reinforced concrete", ACI Mater. J., 89(6), 541-546.
  10. Banthia, N. and Gupta, R. (2004), "Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices", Mater. Struct., 37, 707-716.
  11. Beghini, A., Bazant, Z.P., Zhou, Y., Gouirand, O. and Caner, F. (2007), "Microplane model M5F for multiaxial behavior of and fracture of fiber-reinforced concrete", J. Eng. Mech., 133(1), 66-75. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:1(66)
  12. Bindiganavile, V., Banthia, N. and Aarup, B. (2002), "Impact response of ultra-high-strength fiber-reinforced cement composite", ACI Mater. J., 99(6), 543-548.
  13. Chanvillard, G. and Rigaud, S. (2003), "Complete characterisation of tensile properties of $Ductal{\circledR}$ UHPFRC according to the French recommendations", Fourth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC4), Ann Arbor, MI, June 15-18, 2003. RILEM Publications, A.E. Naaman and H.W. Reinhardt, eds., Bagneux, France, 21-34.
  14. Giaccio, G. and Zerbino, R. (2002), "Fiber reinforced high strength concrete: evaluation of failure mechanism", High Performance Concrete, Performance and Quality of Concrete Structures (Proceedings, Third International Conference, Recife, PE, Brazil), V.M. Malhotra, P. Helene, E.P. Figueirdo, and A. Carneiro, ed., ACI Special Publication, 207, 69-89.
  15. Kabele, P. (2002), "Equivalent continuum model of multiple cracking", Eng. Mech. (Association for Engineering Mechanics, Czech Republic), 9, 75-90.
  16. Kabele, P. (2003), "New developments in analytical modeling of mechanical behavior of ECC", J. Adv. Concr Technol., 1(3), 353-264. https://doi.org/10.3151/jact.1.253
  17. Kabele, P. (2007), "Multiscale framework for modeling of fracture in high performance fiber reinforced cementitous composites", Eng. Fract. Mech., 74, 194-209. https://doi.org/10.1016/j.engfracmech.2006.01.020
  18. Kanda, T. and Li, V.C. (1999), "Effect of fiber strength and fiber-matrix interface on crack bridging in cement composites", J. Eng. Mech., 125(3), 290-299. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:3(290)
  19. Lee, J. and Fenves, G.L. (1998), "Plast-damage model for cyclic loading of concrete structures", J. Eng. Mech., 24(8), 892-900.
  20. Li, V.C. (1992), "Postcrack scaling relations for fiber reinforced concrete cementitous composites", J. Mater. Civil Eng., 4(1), 41-57. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(41)
  21. Li, V.C. and Stang, H. (1997), "Interface property characterization and strengthening mechanisms in fiber reinforced cement based composites", Adv. Cem. Based Mater., 6, 1-20. https://doi.org/10.1016/S1065-7355(97)00004-7
  22. Li, V.C., Stang, H. and Krenchel, H. (1993), "Micromechanics of crack bridging in fibre-reinforced concrete", Mater. Struct., 26, 486-494. https://doi.org/10.1007/BF02472808
  23. Li, V.C. and Wang, S. (2006), "Microstructure variability and macroscopic composite properties of high performance fiber reinforced cementitious composites", Probabilist. Eng. Mech., 21, 201-206. https://doi.org/10.1016/j.probengmech.2005.10.008
  24. Li, V.C., Wang, Y. and Backer, S. (1991), "A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites", J. Mech. Phys. Solids, 39(5), 607-625. https://doi.org/10.1016/0022-5096(91)90043-N
  25. Li, V.C., Wu, H., Maalej, M., Mishra, D.K. and Hashida, T. (1996), "Tensile behavior of cement-based composites with random discontinuous steel fibers", J. Am. Ceram. Soc., 79(1), 74-78. https://doi.org/10.1111/j.1151-2916.1996.tb07882.x
  26. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 229-326.
  27. Maalej, M., Li, V.C. and Hashida, P. (1995), "Effect of fiber rupture on tensile properties of short fiber composites," J. Eng. Mech., 121(8), 903-913. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:8(903)
  28. Nelson, P.K., Li, V.C. and Kamada, T. (2002), "Fracture toughness of microfiber reinforced cement composites", J. Mater. Civil Eng., 14(5), 384-391. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:5(384)
  29. Ngo, T., Mendis, P., Lam, N. and Cavill, B. (2005), "Performance of ultra-high strength concrete panels subjected to blast loading", Science, engineering and technology summit, Canberra, Australia, 2005. P. Mendis, J. Lai, and E. Dawson, ed., Research Network for a Secure Australia, 193-208.
  30. O'Neil, E.F., III, Cummins, T.K., Durst, B.P., Kinnebrew, P.G., Boone, R.N. and Toores, R.X. (2004), "Development of very-high-strength and high-performance concrete materials for improvement of barriers against blast and projectile penetration", U.S. Army Science Conference, Orlando, FL, December 2004.
  31. O'Neil, E.F., Neeley, B.D. and Cargile, J.D. (1999), "Tensile properties of very-high-strength concrete for penetration-resistant structures", Shock Vib., 6, 237-245. https://doi.org/10.1155/1999/415360
  32. Roth, M.J. (2008), Flexural and tensile properties of thin, very high-strength, fiber-reinforced concrete panels, Technical Report ERDC/GSL TR-08-24, U.S. Army Engineer Research and Development Center, Vicksburg, MS 39180.
  33. Shah, S.P. (1997), "Material aspects of high performance concrete", High Strength Concrete – First International Conference, Kona, HI, July 13-18, 1997, A. Atorod, D. Darwin, and C. French, eds., ASCE, Reston, VA, 504-516.
  34. Wang, Y., Li, V.C. and Backer, S. (1990), "Experimental determination of tensile behavior of fiber reinforced concrete", ACI Mater. J., 87(5), 461-468.
  35. Williams, E. Graham, S., Reed, P. and Rushing, T. (2009), "Laboratory characterization of Cor-Tuf with and without steel fibers", technical report in preparation, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, MS.
  36. Zheng, W., Kwan, A.K.H. and Lee, P.K.K. (2001), "Direct tension test of concrete", ACI Mater. J., 98(1), 63-71.

피인용 문헌

  1. Numerical modelling of nonlinear behaviour of prestressed concrete continuous beams vol.15, pp.3, 2015, https://doi.org/10.12989/cac.2015.15.3.373
  2. Testing Procedures for the Uniaxial Tensile Characterization of Fabric-Reinforced Cementitious Matrix Composites vol.20, pp.3, 2016, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000626
  3. Flexural performance and fiber distribution of an extruded DFRCC panel vol.10, pp.2, 2012, https://doi.org/10.12989/cac.2012.10.2.105
  4. The high-rate brittle microplane concrete model: Part II: application to projectile perforation of concrete slabs vol.9, pp.4, 2012, https://doi.org/10.12989/cac.2012.9.4.311
  5. Prediction of ECC tensile stress-strain curves based on modified fiber bridging relations considering fiber distribution characteristics vol.7, pp.5, 2010, https://doi.org/10.12989/cac.2010.7.5.455
  6. The high-rate brittle microplane concrete model: Part I: bounding curves and quasi-static fit to material property data vol.9, pp.4, 2012, https://doi.org/10.12989/cac.2012.9.4.293
  7. Effect of ground granulated blast furnace slag on time-dependent tensile strength of concrete vol.23, pp.2, 2010, https://doi.org/10.12989/cac.2019.23.2.133
  8. Experimental investigations and FE simulation of exterior BCJs retrofitted with CFRP fabric vol.17, pp.4, 2010, https://doi.org/10.12989/eas.2019.17.4.337