DOI QR코드

DOI QR Code

Numerical procedures for extreme impulsive loading on high strength concrete structures

  • Danielson, Kent T. (U.S. Army Engineer Research and Development Center) ;
  • Adley, Mark D. (U.S. Army Engineer Research and Development Center) ;
  • O'Daniel, James L. (U.S. Army Engineer Research and Development Center)
  • 투고 : 2009.08.10
  • 심사 : 2009.11.30
  • 발행 : 2010.04.25

초록

This paper demonstrates numerical techniques for complex large-scale modeling with microplane constitutive theories for reinforced high strength concrete, which for these applications, is defined to be around the 7000 psi (48 MPa) strength as frequently found in protective structural design. Applications involve highly impulsive loads, such as an explosive detonation or impact-penetration event. These capabilities were implemented into the authors' finite element code, ParaAble and the PRONTO 3D code from Sandia National Laboratories. All materials are explicitly modeled with eight-noded hexahedral elements. The concrete is modeled with a microplane constitutive theory, the reinforcing steel is modeled with the Johnson-Cook model, and the high explosive material is modeled with a JWL equation of state and a programmed burn model. Damage evolution, which can be used for erosion of elements and/or for post-analysis examination of damage, is extracted from the microplane predictions and computed by a modified Holmquist-Johnson-Cook approach that relates damage to levels of inelastic strain increment and pressure. Computation is performed with MPI on parallel processors. Several practical analyses demonstrate that large-scale analyses of this type can be reasonably run on large parallel computing systems.

키워드

참고문헌

  1. Bazant, Z.P., Caner, F.C., Carol, I., Adley, M.D. and Akers, S.A. (2000), "Microplane model M4 for concrete. I: formulation with work-conjugate stress", J. Eng. Mech., 126(9), 944-953. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:9(944)
  2. Bazant, Z.P., Xiang, Y., Adley, M. D., Prat, P.C., and Akers, S.A. (1996), "Microplane model for concrete. I: stress-strain boundaries and finite strain; II: data delocalization and verification", J. Eng. Mech., 122(3), 245-262. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:3(245)
  3. Britt, J.R., Ranta, D.E. and Joachim, C.E. (2001), "BLASTX Code, Version 4.2, User's Manual", ERDC/GSL TR-01-2, U.S. Army Eng. Res. Devel. Center., Vicksburg, MS.
  4. Danielson, K.T. and Namburu, R.R. (1998), "Nonlinear dynamic finite element analysis on parallel computers Using FORTRAN 90 and MPI", Adv. Eng. Software, 29(3-6), 179-186. https://doi.org/10.1016/S0965-9978(98)00019-2
  5. Flanagan, D.P. and Belytschko, T. (1981), "A uniform strain hexahedron and quadrilateral with orthogonal hourglass control", Int. J. Numer. Meth. Eng., 17, 679-706. https://doi.org/10.1002/nme.1620170504
  6. Fossum, A.F. and Brannon, R.M. (2004), "The Sandia GEOMODEL, Theory and user's guide", Sandia Report, SAND2004-3226, Sandia National Laboratories, Albuquerque, NM.
  7. Holmquist, T.J., Johnson, G.R. and Cook, W.H. (1993), "A computational constitutive model and data for concrete subjected to large strains, high strain rates, and high pressures", Proceedings of Fourteenth Int. Sym. Ballistics, Quebec City, Canada.
  8. Hoover, C.G., DeGroot, A.J., Maltby, J.D. and Procassini, R.J. (1995), "ParaDyn - DYNA3D for massively parallel computers", Eng., Res., Devel. Tech. FY94, Lawrence Livermore National Laboratory, UCRL 53868-94, Livermore, CA.
  9. Johnson, G.R. and Cook, W.H. (1983), "A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures", Proceedings of seventh international Symposium on Ballistics, The Hague, Netherlands.
  10. Karypis, G. and Kumar, V. (1995a), "A fast and high quality multilevel scheme for partitioning irregular graphs", Technical Report TR 95-035, Department of Computer Science, University of Minnesota. Minneapolis, Minnesota.
  11. Karypis, G. and Kumar, V. (1995b), "A parallel algorithm for multilevel graph partitioning and sparse matrix ordering", TR 95-036, Department Computer Sci., Univ. Minnesota, Minneapolis, Minnesota.
  12. Malvern, L.E. (1969), Introduction to the Mechanics of Acontinuous Media, Prentice-Hall, Englewood Cliffs, New Jersey.
  13. Ozbolt, J., Periškic, G., Reinhardt, H-F. and Eligehausen, R. (2008), "Numerical analysis of spalling of concrete cover at high temperature", Comput. Concrete, 5(4), 279-293. https://doi.org/10.12989/cac.2008.5.4.279
  14. Ozbolt, J., Kozar, I., Eligehausen, R. and Periskic, G. (2005), "Three-dimensional FE analysis of headed stud anchors exposed to fire", Comput. Concrete, 2(4), 249-266. https://doi.org/10.12989/cac.2005.2.4.249
  15. Paz, C.N.M., Alves, J.L.D. and Ebecken, N.F.F. (2005), "Assessment of computational performance for a vector parallel implementation: 3D probabilistic model discrete cracking in concrete", Comput. Concrete, 2(5), 345-366. https://doi.org/10.12989/cac.2005.2.5.345
  16. Plimpton, S., Attaway, S., Hendrickson, B., Swegle, J., Vaughan, C. and Gardner, D. (1996), "Transient dynamics simulations: parallel algorithms for contact detection and smoothed particle hydrodynamics", Proceedings of SuperComputing 96, Pittsburgh, PA.
  17. Taylor, L.M. and Flanagan, D.P. (1989), "PRONTO 3D: A three-dimensional transient solid dynamics program", Report SAND 87-1912, Sandia National Laboratories, Albuquerque, NM.
  18. Weerheijm, J., Mediavilla, J. and van Doormaal, J.C.A.M. (2009), "Explosive loading of multi storey RC buildings: Dynamic response and progressive collapse", Struct. Eng. Mech., 32(2), 193-212. https://doi.org/10.12989/sem.2009.32.2.193

피인용 문헌

  1. The high-rate brittle microplane concrete model: Part I: bounding curves and quasi-static fit to material property data vol.9, pp.4, 2012, https://doi.org/10.12989/cac.2012.9.4.293
  2. The high-rate brittle microplane concrete model: Part II: application to projectile perforation of concrete slabs vol.9, pp.4, 2012, https://doi.org/10.12989/cac.2012.9.4.311
  3. Application of artificial neural networks (ANNs) and linear regressions (LR) to predict the deflection of concrete deep beams vol.11, pp.3, 2013, https://doi.org/10.12989/cac.2013.11.3.237
  4. Hydrodynamic meshfree method for high-rate solid dynamics using a Rankine-Hugoniot enhancement in a Riemann-SCNI framework vol.108, pp.12, 2016, https://doi.org/10.1002/nme.5266
  5. Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams vol.46, pp.6, 2013, https://doi.org/10.12989/sem.2013.46.6.853