DOI QR코드

DOI QR Code

Seismic response control of benchmark highway bridge using variable dampers

  • Madhekar, S.N. (Department of Civil Engineering, Indian Institute of Technology Bombay) ;
  • Jangid, R.S. (Department of Civil Engineering, Indian Institute of Technology Bombay)
  • Received : 2009.04.17
  • Accepted : 2010.04.16
  • Published : 2010.11.25

Abstract

The performance of variable dampers for seismic protection of the benchmark highway bridge (phase I) under six real earthquake ground motions is presented. A simplified lumped mass finite-element model of the 91/5 highway bridge in Southern California is used for the investigation. A variable damper, developed from magnetorheological (MR) damper is used as a semi-active control device and its effectiveness with friction force schemes is investigated. A velocity-dependent damping model of variable damper is used. The effects of friction damping of the variable damper on the seismic response of the bridge are examined by taking different values of friction force, step-coefficient and transitional velocity of the damper. The seismic responses with variable dampers are compared with the corresponding uncontrolled case, and controlled by alternate sample control strategies. The results of investigation clearly indicate that the base shear, base moment and mid-span displacement are substantially reduced. In particular, the reduction in the bearing displacement is quite significant. The friction and the two-step friction force schemes of variable damper are found to be quite effective in reducing the peak response quantities of the bridge to a level similar to or better than that of the sample passive, semi-active and active controllers.

Keywords

References

  1. Agrawal, A.K., Tan, P., Nagarajaiah, S. and Zhang, J. (2009), "Benchmark structural control problem for a seismically excited highway bridge, part I: problem definition", Struct. Control Health Monit., 16(5), 509-529. https://doi.org/10.1002/stc.301
  2. Ali, S.F. and Ramaswamy, A. (2006), "Benchmark control problem for highway bridge based on FLC", Proceedings of the ASCE Structures Congress 2006, St. Louis, MO, USA, May.
  3. Choi, K.M., Jung, H.J., Cho, S.W. and Lee, I.W. (2006), "Application of smart passive damping system using MR damper to highway bridge benchmark problem", Proceedings of the 8th international conference on Motion and Vibration control (MOVIC 2006), Daejeon, Korea, August.
  4. Kawashima, K. and Unjoh, S. (1994), "Seismic response control of bridges by variable dampers", J. Struct. Eng.-ASCE, 120(9), 2583-2601. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:9(2583)
  5. Kunde, M.C. and Jangid, R.S. (2003), "Seismic behaviour of isolated bridges: A state-of-the-art review", Electron. J. Struct. Eng., 3, 140-170.
  6. Reigles, D.G. and Symans, M.D. (2006), "Response modification of highway bridge benchmark structure using supervisory fuzzy control of smart seismic isolation system", Proceedings of the ASCE Structures Congress 2006, St. Louis, MO, USA, May.
  7. Ruangrassamee, A. and Kawashima, K. (2001), "Experimental study on semi-active control of bridges with use of magnetorheological damper", J. Struct. Eng.-JSCE, 47A(2), 639-650.
  8. Ruangrassamee, A. and Kawashima, K. (2002), "Seismic response control of a benchmark cable-stayed bridge by variable dampers", Proceedings of the American Control Conference 2002, Anchorage, AK, USA, May.
  9. Ruangrassamee, A. and Kawashima, K. (2003), "Control of nonlinear bridge response with pounding effect by variable dampers", Eng. Struct., 25(5), 593-606. https://doi.org/10.1016/S0141-0296(02)00169-4
  10. Ruangrassamee, A. and Kawashima, K. (2006), "Seismic response control of a cable- stayed bridge by variable dampers", J. Earthq. Eng., 10(1), 153-165.
  11. Ruangrassamee, A., Nakamura, G. and Kawashima, K. (2004), "A model test and analysis on seismic response control of bridges by MR dampers", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
  12. Spencer, Jr., B.F., Dyke, S.J., Sain, M.K. and Carlson, J.D. (1997), "Phenomenological model of a magnetorheological damper", J. Eng. Mech.-ASCE, 123(3), 230-238. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230)
  13. Tan, P. and Agrawal, A.K. (2009), "Benchmark structural control problem for a seismically excited highway bridge-Part II: Phase I Sample control designs", Struct. Control Health Monit., 16(5), 530-548. https://doi.org/10.1002/stc.300
  14. Zhang, J. and Makris, N. (2002), "Seismic response analysis of highway overcrossings including soil-structure interaction", Earthq. Eng. Struct. D., 31(11), 1967-1991. https://doi.org/10.1002/eqe.197

Cited by

  1. Anti-seismic reliability analysis of continuous rigid-frame bridge based on numerical simulations vol.6, pp.1, 2013, https://doi.org/10.1080/19373260.2012.716721
  2. Thermodynamic Behaviors of a Kind of Self-Decoupling Magnetorheological Damper vol.2015, 2015, https://doi.org/10.1155/2015/502747
  3. Effectiveness of classical rolling pendulum bearings vol.1, pp.2, 2016, https://doi.org/10.12989/mmm.2016.1.2.157
  4. Effectiveness of classical rolling pendulum bearings vol.6, pp.2, 2017, https://doi.org/10.12989/csm.2017.6.2.127