DOI QR코드

DOI QR Code

Experimental validation of a multi-level damage localization technique with distributed computation

  • Yan, Guirong (School of Mechanical Engineering, Purdue University) ;
  • Guo, Weijun (Department of Computer Science and Engineering, Washington University) ;
  • Dyke, Shirley J. (School of Mechanical Engineering, Purdue University) ;
  • Hackmann, Gregory (Department of Computer Science and Engineering, Washington University) ;
  • Lu, Chenyang (Department of Computer Science and Engineering, Washington University)
  • 투고 : 2009.10.14
  • 심사 : 2010.03.30
  • 발행 : 2010.07.25

초록

This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.

키워드

참고문헌

  1. American Society of Civil Engineers (ASCE), (2009), Report Card for America's Infrastructure, Reston, Virginia, USA.
  2. Bernal, D. and Gunes, B. (2004), "Flexibility based approach for damage characterization: benchmark application", J. Eng. Mech., 130(1), 61-70. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:1(61)
  3. Brinker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference, San Antonio, TX.
  4. Castaneda, N., Dyke, S., Lu, C., Sun, F. and Hackmann, G. (2009), "Experimental deployment and validation of a distributed shm system using wireless sensor networks", Struct. Eng. Mech., 32(6), 787-809. https://doi.org/10.12989/sem.2009.32.6.787
  5. Chintalapudi, K., Johnson, E.A. and Govindan, R. (2005), "Structural damage detection using wireless sensoractuator networks", Proceedings of the 13th MoM03-4 Mediterranean Conference on Control and Automation, Limassol, Cyprus, June.
  6. Crossbow Technology, Inc., ITS400 Imote2 Basic Sensor Board, Available at http://www.xbow.com/Products/ Product_pdf_files/Wireless_pdf/ITS400_Datasheet.pdf.
  7. Feng, J., Koushanfar, F. and Potkonjak, M. (2002), "System-architecture for sensor networks issues, alternatives, and directions", Proceedings of the 2002 IEEE International Conference on Computer Design (ICCD '02).
  8. Galbreath, J.H., Townsend, C.P., Mundell, S.W., Hamel, M.J., Esser, B., Huston, D. and Arms, S.W. (2003), "Civil structure strain monitoring with power-efficient, high-speed wireless sensor networks", Proceedings of the 4th Interantional Workshop on Structural Health Monitoring, Stanford University, Stanford, CA, September.
  9. Gao, Y. and Spencer, B.F. (2002), "Flexibility-based damage location employing ambient vibration", Proceedings of the 15th ASCE Engineering Mechanics Conference, New York.
  10. Hackmann, G., Chipara, O. and Lu, C.Y. (2008), "Robust topology control for indoor wireless sensor networks", Proceedings of the 6th ACM conference on Embedded network sensor systems, Raleigh, NC, USA, November.
  11. Hackmann, G., Sun, F., Castaneda, N., Lu, C. and Dyke, S. (2008), "A holistic approach to decentralized structural damage localization using wireless sensor networks", Proceedings of the 29th IEEE Real-Time Systems Symposium, Barcelona, Spain, November.
  12. Horton, M.A., Glaser, S. and Sitar, N. (2002), "Wireless networks for structural health monitoring and hazard mitigation", Proceedings of the US-Europe Workshop on Sensors and Smart Structures Technology.
  13. Jason Lester, Hill (2003), System Architecture for Wireless Sensor Network, PhD Dissertation, University of California, Berkeley.
  14. Jeong, Min-Joong and Koh, Bong-Hwan (2009), "A decentralized approach to damage localization through smart wireless sensors", Smart Struct. Syst., 5(1), 43-54. https://doi.org/10.12989/sss.2009.5.1.043
  15. Lynch, J.P., Kiremidjian, A.S., Law, K.H., Kenny, T. and Carryer, E. (2002), "Issues in wireless structural damage monitoring technologies", Proceedings of the Third World Conference on Structural Control, Como, Italy, April.
  16. Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S. and Carryer, E. (2004), "Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency", Smart Mater. Struct., 13(4), 800-810. https://doi.org/10.1088/0964-1726/13/4/018
  17. Maroti, M., Kusy, B., Simon, G. and Lédeczi, A. (2004), "The flooding time synchronization protocol", Proceedings of the 2nd International Conference on Embedded Network Systems, Baltimore, Maryland, USA, November.
  18. Messina, A., Jones, I.A. and Williams, E.J. (1996), "Damage detection and localization using natural frequencies changes", Proceedings of the Conference on Identification in Engineering Systems, Swansea, UK.
  19. Moss, David and Levis, Philip (2008), BoX-MACs: Exploiting physical and link layer boundaries in low-power networking, Technical Report SING-08-00, Stanford Information Networks Group.
  20. Nagayama, T. and Spencer, Jr., B.F. (2007), Structural Health Monitoring Using Smart Sensors, Newmark Structural Engineering Laboratory (NSEL) Report Series, No.NSEL-001, University of Illinois, Urbana- Champaign, Available at http://hdl.handle.net/2142/3521.
  21. Pandey, A.K. and Biswas, M. (1995), "Experimental verification of flexibility difference method for locating damage in structures", J. Sound Vib., 184(2), 311-328. https://doi.org/10.1006/jsvi.1995.0319
  22. Polastre, J., Szewczyk, R. and Culler, D. (2005), "Telos: enabling ultra-low power wireless research", Proceedings of the 4th international symposium on Information processing in sensor networks, Piscataway, NJ, USA.
  23. Spencer, B.F. (2003), "Opportunities and challenges for smart sensing technology", Proceedings of the First International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, November.
  24. Wang, Yang, Lynch, Jerome P. and Law, Kincho H. (2007a), "A wireless structural health monitoring system with multithreaded sensing devices: design and validation", Struct. Infrastruct. E., 3(2), 103-120. https://doi.org/10.1080/15732470600590820
  25. Wang, Yang, Swartz, R. Andrew, Lynch, Jerome P., Law, Kincho H., Lu, Kung-Chun and Loh, Chin-Hsiung (2007b), "Decentralized civil structural control using real-time wireless sensing and embedded computing", Smart Struct. Syst., 3(3), 321-340. https://doi.org/10.12989/sss.2007.3.3.321
  26. Yan, Guirong, Duan, Zhongdong and Ou, Jinping (2008), "Structural damage detection using the angle-betweenstring- and-horizon flexibility", Submitted to Struct. Eng. Mech. and under review.
  27. Yan, Guirong, Duan, Zhongdong and Ou, Jinping (2009), "Damage detection for truss or frame structures using an axial strain flexibility", Smart Struct. Syst., 5(3), 291-316. https://doi.org/10.12989/sss.2009.5.3.291
  28. Ye, Wei, Silva, Fabio and Heidemann, John (2006), "Ultra-low duty cycle MAC with scheduled channel polling", Proceedings of the 4th international conference on Embedded networked sensor systems, Boulder, Colorado, USA, November.
  29. Yu, Yan and Ou, Jinping (2009), "Wireless collection and data fusion method of strain signal in civil engineering structures", Sensor Review, 29(1), 63-69. https://doi.org/10.1108/02602280910926760
  30. Yu, Yan, Ou, Jinping, Zhang, Jun, Zhang, Chunwei and Li, Luyu (2009), "Development of wireless MEMS inclination sensor system for swing monitoring of large scale hook structures", IEEE T. Ind. Electron., 56(4), 1072-1078. https://doi.org/10.1109/TIE.2009.2012469
  31. Zimmerman, A.T., Shiraishi, M., Swartz, R.A. and Lynch, J.P. (2008), "Auto-mated modal parameter estimation by parallel processing within wireless monitoring systems", J. Infrastruct. Syst., 14, 102-113. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(102)

피인용 문헌

  1. Damage detection for beam structures using an angle-between-string-and-horizon flexibility matrix vol.36, pp.5, 2010, https://doi.org/10.12989/sem.2010.36.5.643
  2. TinyOS-based real-time wireless data acquisition framework for structural health monitoring and control vol.20, pp.6, 2013, https://doi.org/10.1002/stc.1514
  3. Lossless In-Network Processing in WSNs for Domain-Specific Monitoring Applications vol.13, pp.5, 2017, https://doi.org/10.1109/TII.2017.2691586
  4. An efficient method for structural damage localization based on the concepts of flexibility matrix and strain energy of a structure vol.46, pp.2, 2010, https://doi.org/10.12989/sem.2013.46.2.231