DOI QR코드

DOI QR Code

Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses

  • Cho, Soojin (Department of Civil and Environmental Engineering, KAIST) ;
  • Jo, Hongki (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Jang, Shinae (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Park, Jongwoong (Department of Civil and Environmental Engineering, KAIST) ;
  • Jung, Hyung-Jo (Department of Civil and Environmental Engineering, KAIST) ;
  • Yun, Chung-Bang (Department of Civil and Environmental Engineering, KAIST) ;
  • Spencer, Billie F. Jr. (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Seo, Ju-Won (Long Span Bridge Research Team, Hyundai Instititue of Construction Technology)
  • 투고 : 2009.11.13
  • 심사 : 2010.03.04
  • 발행 : 2010.07.25

초록

This paper analyses the data collected from the $2^{nd}$ Jindo Bridge, a cable-stayed bridge in Korea that is a structural health monitoring (SHM) international test bed for advanced wireless smart sensors network (WSSN) technology. The SHM system consists of a total of 70 wireless smart sensor nodes deployed underneath of the deck, on the pylons, and on the cables to capture the vibration of the bridge excited by traffic and environmental loadings. Analysis of the data is performed in both the time and frequency domains. Modal properties of the bridge are identified using the frequency domain decomposition and the stochastic subspace identification methods based on the output-only measurements, and the results are compared with those obtained from a detailed finite element model. Tension forces for the 10 instrumented stay cables are also estimated from the ambient acceleration data and compared both with those from the initial design and with those obtained during two previous regular inspections. The results of the data analyses demonstrate that the WSSN-based SHM system performs effectively for this cable-stayed bridge, giving direct access to the physical status of the bridge.

키워드

참고문헌

  1. ATMACS (2008), Consulting for the measurement systems for integrated entrusted management of long-span bridges (The 1st and 2nd Jindo Bridges) (in Korean), Sungnam, Gyunggi-do, Korea.
  2. Brincker, R. Zhang, L. and Andersen, P. (2001), "Modal identification of output-only systems using frequency domain decomposition" Smart Mater. Struct., 10, 441-445. https://doi.org/10.1088/0964-1726/10/3/303
  3. Caetano, E., Cunha, A., Gattulli, V. and Lepidi, M. (2008), "Cable-deck dynamic interactions at the International Guadiana Bridge: On-site measurements and finite element modeling", Struct. Control Health Monit., 15(3), 237-264. https://doi.org/10.1002/stc.241
  4. Cho, S., Lynch, J.P., Lee, J.J. and Yun, C.B. (2010), "Development of an automated wireless tension force estimation system for cable-stayed bridge", J. Intel. Mat. Syst. Str., 21(3), 361-376. https://doi.org/10.1177/1045389X09350719
  5. Ernst, J.H. (1965), "Der E-modul von seilen unter berucksienhtigung des durchanges (in German), Der Bauingenieur, 40(2), 52-55.
  6. Fujino, Y., Siringoringo, D.M. and Abe M. (2009), "The needs for advanced sensor technologies in risk assessment of civil infrastructures", Smart Struct. Syst., 5(2), 173-191. https://doi.org/10.12989/sss.2009.5.2.173
  7. Irvine, M. (1981), Cable structures, Dover Publications, Inc., New York, USA.
  8. Jain, A., Jones, N.P. and Scanlan, R.H. (1998), "Effect of modal damping on bridge aeroelasticity", J. Wind Eng. Ind. Aerod., 77(8), 421-430.
  9. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice, J.A., Sim, S.H., Jung, H.J., Yun, C.B., Spencer, Jr., B.F. and Agha, G. (2010), "Structural health monitoring of a cable stayed bridge using smart sensor technology: deployment and evaluation", Smart Struct. Syst., 6(5-6), 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  10. Jeong, M.J. and Koh, B.H. (2009), "A decentralized approach to damage localization through smart wireless sensors," Smart Struct. Syst., 5(1), 43-54. https://doi.org/10.12989/sss.2009.5.1.043
  11. Koo, K.Y., Lee, J.J., Yun, C.B. and Kim, J.T. (2008), "Damage detection in beam-like structures using deflections obtained by modal flexibility matrices", Smart Struct. Syst., 4(5), 605-628. https://doi.org/10.12989/sss.2008.4.5.605
  12. Koshimura, K., Tatsumi, M. and Hata, K. (1994), "Vibration control of the main towers of the Akashi Kaikyo Bridge", Proceedings of the 1st World Conference on Structural Control, Los Angeles, California, USA.
  13. Li, H., Liu, M., Li, J.H., Guan, X.C. and Ou, J.P. (2007), "Vibration control of stay cables of the Shandong Binzhou yellow drive highway bridge using magnetorehaological fluid dampers", J. Bridge Eng., 12(4), 401-409. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:4(401)
  14. MidasIT (2009), http://www.midasit.com.
  15. Overschee, P.V. and De Moor, B. (1993), "Subspace algorithms for the stochastic identification problem", Automatics, 29(3), 649-660. https://doi.org/10.1016/0005-1098(93)90061-W
  16. Pakzad, S.N., Fenves, G.L., Kim. S. and Culler, D.E. (2008), "Design and implementation of scalable wireless sensor network for structural monitoring", J. Infrastruct. Syst., 14(1), 89-101. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
  17. Park, Y.S., Choi, S.M., Yang, W.Y., Hong, H.J. and Kim, W.H. (2008), "A study on tension for cables of a cablestayed bridge damper is attached (in Korean)", J. Korean Soc. Steel Constr., 20(5), 609-616.
  18. Peeters, B. and De Roeck, G. (1999), "Reference-based stochastic subspace identification for output-only modal analysis", Mech. Syst. Signal Pr., 13(6), 855-878. https://doi.org/10.1006/mssp.1999.1249
  19. Pinto da Costa, A., Martins, J.A.C., Branco, F. and Lilien, J.L. (1996), "Oscillations of bridge stay cables induced by periodic motions of deck and/or towers", J. Eng. Mech.-ASCE, 122(7), 613-622. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:7(613)
  20. Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, Jr., B.F., Agha, G. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. https://doi.org/10.12989/sss.2010.6.5_6.423
  21. Sim, S.H., Carbonell-Marquez, J.F. and Spencer, Jr., B.F. (2010), "Efficient decentralized data aggregation in wireless smart sensor networks," Proceedings of the SPIE conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, CA, USA.
  22. Weng, J.H., Loh, C.H., Lynch, J.P., Lu, K.C., Lin, P.Y. and Wang, Y. (2008), "Output-only modal identification of a cable-stayed bridge using wireless monitoring systems", Eng. Struct., 30(7), 1820-1830. https://doi.org/10.1016/j.engstruct.2007.12.002
  23. Yi, J.H. and Yun, C.B. (2004), "Comparative study on modal identification methods using output-only information", Struct. Eng. Mech., 17(3-4), 445-466. https://doi.org/10.12989/sem.2004.17.3_4.445
  24. Yun, J. (2001), Finite element model updating for cable-stayed bridge using ambient vibration (in Korean), Ph.D. Thesis, Seoul National University, Seoul, Korea.

피인용 문헌

  1. Smart sensing, monitoring, and damage detection for civil infrastructures vol.15, pp.1, 2011, https://doi.org/10.1007/s12205-011-0001-y
  2. Operation of battery-less and wireless sensor using magnetic resonance based wireless power transfer through concrete vol.17, pp.4, 2016, https://doi.org/10.12989/sss.2016.17.4.631
  3. Footbridge system identification using wireless inertial measurement units for force and response measurements vol.384, 2016, https://doi.org/10.1016/j.jsv.2016.08.008
  4. A Tensor-Based Structural Damage Identification and Severity Assessment vol.18, pp.1, 2018, https://doi.org/10.3390/s18010111
  5. System identification of a historic swing truss bridge using a wireless sensor network employing orientation correction vol.22, pp.2, 2015, https://doi.org/10.1002/stc.1672
  6. Probabilistic Assessment of High-Throughput Wireless Sensor Networks vol.16, pp.12, 2016, https://doi.org/10.3390/s16060792
  7. Magnetic Resonance-Based Wireless Power Transmission through Concrete Structures vol.15, pp.2, 2015, https://doi.org/10.5515/JKIEES.2015.15.2.104
  8. Feasibility of displacement monitoring using low-cost GPS receivers vol.20, pp.9, 2013, https://doi.org/10.1002/stc.1532
  9. Feasibility Study of Micro-Wind Turbines for Powering Wireless Sensors on a Cable-Stayed Bridge vol.5, pp.12, 2012, https://doi.org/10.3390/en5093450
  10. Synchronized sensing for wireless monitoring of large structures vol.18, pp.5, 2016, https://doi.org/10.12989/sss.2016.18.5.885
  11. Mobile augmented reality visualization and collaboration techniques for on-site finite element structural analysis 2018, https://doi.org/10.1142/S1793962318400019
  12. Using inertial measurement units originally developed for biomechanics for modal testing of civil engineering structures vol.104, 2018, https://doi.org/10.1016/j.ymssp.2017.11.035
  13. Joint distribution of wind speed and direction in the context of field measurement vol.20, pp.5, 2015, https://doi.org/10.12989/was.2015.20.5.701
  14. Full-scale experimental validation of decentralized damage identification using wireless smart sensors vol.21, pp.11, 2012, https://doi.org/10.1088/0964-1726/21/11/115019
  15. Performance enhancement of a rotational energy harvester utilizing wind-induced vibration of an inclined stay cable vol.22, pp.7, 2013, https://doi.org/10.1088/0964-1726/22/7/075004
  16. Remote structural health monitoring systems for next generation SCADA vol.11, pp.5, 2013, https://doi.org/10.12989/sss.2013.11.5.511
  17. The state of the art in structural health monitoring of cable-stayed bridges vol.6, pp.1, 2016, https://doi.org/10.1007/s13349-015-0115-x
  18. Wind power spectra for coastal area of East Jiangsu Province based on SHMS vol.22, pp.2, 2016, https://doi.org/10.12989/was.2016.22.2.235
  19. A Recent Research Summary on Smart Sensors for Structural Health Monitoring vol.19, pp.3, 2015, https://doi.org/10.11112/jksmi.2015.19.3.010
  20. Deployment of a Smart Structural Health Monitoring System for Long-Span Arch Bridges: A Review and a Case Study vol.17, pp.9, 2017, https://doi.org/10.3390/s17092151
  21. A decentralized receptance-based damage detection strategy for wireless smart sensors vol.21, pp.5, 2012, https://doi.org/10.1088/0964-1726/21/5/055017
  22. Wireless MEMS-Based Accelerometer Sensor Boards for Structural Vibration Monitoring: A Review vol.17, pp.2, 2017, https://doi.org/10.1109/JSEN.2016.2630008
  23. Statistical Analysis of Modal Properties of a Cable-Stayed Bridge through Long-Term Wireless Structural Health Monitoring vol.22, pp.9, 2017, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001093
  24. Smart wireless sensing and assessment for civil infrastructure vol.10, pp.4, 2014, https://doi.org/10.1080/15732479.2013.769011
  25. Traffic Safety Evaluation for Railway Bridges Using Expanded Multisensor Data Fusion vol.31, pp.10, 2016, https://doi.org/10.1111/mice.12210
  26. An energy harvesting system using the wind-induced vibration of a stay cable for powering a wireless sensor node vol.20, pp.7, 2011, https://doi.org/10.1088/0964-1726/20/7/075001
  27. Development of a wireless sensor network system for suspension bridge health monitoring vol.21, 2012, https://doi.org/10.1016/j.autcon.2011.06.008
  28. An Iterative Modal Identification Algorithm for Structural Health Monitoring Using Wireless Sensor Networks vol.29, pp.2, 2013, https://doi.org/10.1193/1.4000133
  29. Develoment of high-sensitivity wireless strain sensor for structural health monitoring vol.11, pp.5, 2013, https://doi.org/10.12989/sss.2013.11.5.477
  30. A wireless smart sensor network for automated monitoring of cable tension vol.23, pp.2, 2014, https://doi.org/10.1088/0964-1726/23/2/025006
  31. Comparative Field Study of Cable Tension Measurement for a Cable-Stayed Bridge vol.18, pp.8, 2013, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000421
  32. A Test Method for Damage Diagnosis of Suspension Bridge Suspender Cables vol.30, pp.10, 2015, https://doi.org/10.1111/mice.12144
  33. Self-reliant wireless health monitoring based on tuned-mass-damper mechanism vol.15, pp.6, 2015, https://doi.org/10.12989/sss.2015.15.6.1625
  34. Recent R&D activities on structural health monitoring in Korea vol.3, pp.1, 2016, https://doi.org/10.12989/smm.2016.3.1.091
  35. Wireless crack detection and analysis system for nuclear power plant 2015, https://doi.org/10.1080/19443994.2015.1006823
  36. Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring vol.64-65, 2015, https://doi.org/10.1016/j.ymssp.2015.04.003
  37. Statistics based localized damage detection using vibration response vol.14, pp.2, 2014, https://doi.org/10.12989/sss.2014.14.2.085
  38. Recent advances in wireless smart sensors for multi-scale monitoring and control of civil infrastructure vol.6, pp.1, 2016, https://doi.org/10.1007/s13349-015-0111-1
  39. Finite element modeling of the dynamic response of a composite reinforced concrete bridge for structural health monitoring vol.6, pp.2, 2014, https://doi.org/10.1007/s40091-014-0055-4
  40. Sensor Attitude Correction of Wireless Sensor Network for Acceleration-Based Monitoring of Civil Structures vol.30, pp.11, 2015, https://doi.org/10.1111/mice.12147
  41. Multiscale Acceleration-Dynamic Strain-Impedance Sensor System for Structural Health Monitoring vol.8, pp.10, 2012, https://doi.org/10.1155/2012/709208
  42. Railroad bridge monitoring using wireless smart sensors vol.24, pp.2, 2017, https://doi.org/10.1002/stc.1863
  43. The Nonuniform Node Configuration of Wireless Sensor Networks for Long-Span Bridge Health Monitoring vol.9, pp.9, 2013, https://doi.org/10.1155/2013/797650
  44. Estimation of the dynamic response of a slender suspension bridge using measured acceleration data vol.199, 2017, https://doi.org/10.1016/j.proeng.2017.09.547
  45. Decentralized random decrement technique for efficient data aggregation and system identification in wireless smart sensor networks vol.26, pp.1, 2011, https://doi.org/10.1016/j.probengmech.2010.07.002
  46. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  47. Bayesian network-based modal frequency–multiple environmental factors pattern recognition for the Xinguang Bridge using long-term monitoring data pp.2048-4046, 2018, https://doi.org/10.1177/1461348418786520
  48. LoRa LPWAN Sensor Network for Real-Time Monitoring and It’s Control Method vol.31, pp.6, 2018, https://doi.org/10.7734/COSEIK.2018.31.6.359
  49. Effect of Tensile Force on Magnetostrictive Sensors for Generating and Receiving Longitudinal Mode Guided Waves in Steel Wires vol.2019, pp.1687-7268, 2019, https://doi.org/10.1155/2019/9512190
  50. Flexible smart sensor framework for autonomous structural health monitoring vol.6, pp.5, 2010, https://doi.org/10.12989/sss.2010.6.5_6.423
  51. Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation vol.6, pp.5, 2010, https://doi.org/10.12989/sss.2010.6.5_6.439
  52. Reliable multi-hop communication for structural health monitoring vol.6, pp.5, 2010, https://doi.org/10.12989/sss.2010.6.5_6.481
  53. Solar-powered multi-scale sensor node on Imote2 platform for hybrid SHM in cable-stayed bridge vol.9, pp.2, 2010, https://doi.org/10.12989/sss.2012.9.2.145
  54. Quasi-static Responses Estimation of a Cable-stayed Bridge from Displacement Data at a Limited Number of Points vol.17, pp.2, 2010, https://doi.org/10.1007/s13296-017-6032-6
  55. Dynamic modeling and control of IPMC hydrodynamic propulsor vol.20, pp.4, 2010, https://doi.org/10.12989/sss.2017.20.4.499
  56. Sistema inteligente, sostenible e integrado de gestión de estructuras = Intelligent, sustainable and integrated structure management system vol.4, pp.2, 2010, https://doi.org/10.20868/ade.2018.3778
  57. An integrated structural health monitoring system for the Xijiang high-speed railway arch bridge vol.21, pp.5, 2010, https://doi.org/10.12989/sss.2018.21.5.611
  58. 최소화된 계측 및 신호 처리 시스템을 이용한 상시진동 케이블의 효율적인 장력 추정에 관한 연구 vol.19, pp.11, 2018, https://doi.org/10.5762/kais.2018.19.11.594
  59. High resolution operational modal analysis on a five-story smart building under wind and human induced excitation vol.176, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.08.060
  60. Technology Leveraging for Infrastructure Asset Management: Challenges and Opportunities vol.5, pp.None, 2019, https://doi.org/10.3389/fbuil.2019.00061
  61. Modal flexibility based damage detection for suspension bridge hangers: A numerical and experimental investigation vol.23, pp.1, 2010, https://doi.org/10.12989/sss.2019.23.1.015
  62. CNN-based damage identification method of tied-arch bridge using spatial-spectral information vol.23, pp.5, 2019, https://doi.org/10.12989/sss.2019.23.5.507
  63. Bayesian forecasting approach for structure response prediction and load effect separation of a revolving auditorium vol.24, pp.4, 2010, https://doi.org/10.12989/sss.2019.24.4.507
  64. Damping estimates from reconstructed displacement for low-frequency dominant structures vol.136, pp.None, 2020, https://doi.org/10.1016/j.ymssp.2019.106533
  65. Modal parameter identification with compressed samples by sparse decomposition using the free vibration function as dictionary vol.25, pp.2, 2020, https://doi.org/10.12989/sss.2020.25.2.123
  66. Long term structural health monitoring for old deteriorated bridges: a copula-ARMA approach vol.25, pp.3, 2020, https://doi.org/10.12989/sss.2020.25.3.285
  67. Towards rapid and robust measurements of highway structures deformation using a wireless sensing system derived from wired sensors vol.10, pp.2, 2010, https://doi.org/10.1007/s13349-020-00385-5
  68. Vision-Based Monitoring of Post-Tensioned Diagonals on Miter Lock Gate vol.146, pp.10, 2010, https://doi.org/10.1061/(asce)st.1943-541x.0002777
  69. Inspection of surface defects on stay cables using a robot and transfer learning vol.119, pp.None, 2010, https://doi.org/10.1016/j.autcon.2020.103382
  70. Damping estimation of a pedestrian footbridge - an enhanced frequency-domain automated approach vol.23, pp.1, 2010, https://doi.org/10.21595/jve.2020.21577
  71. An Enhanced Inverse Filtering Methodology for Drive-By Frequency Identification of Bridges Using Smartphones in Real-Life Conditions vol.4, pp.2, 2010, https://doi.org/10.3390/smartcities4020026
  72. Experimental investigation on energy harvesting performance of regenerative hybrid electrodynamic damper vol.334, pp.None, 2010, https://doi.org/10.1016/j.sna.2021.113317