DOI QR코드

DOI QR Code

Damage assessment of structures - an US air force office of scientific research structural mechanics perspective

  • Received : 2008.04.10
  • Accepted : 2009.08.24
  • Published : 2010.03.25

Abstract

This paper presents the perspective of the Structural Mechanics program of the Air Force Office of Scientific Research (AFOSR) on the damage assessment of structures for the period 2006-2009 when the author was serving as Program Manager at AFOSR. It is found that damage assessment of structures plays a very important role in assuring the safety and operational readiness of US Air Force fleet. The current fleet has many aging aircraft, which poses a considerable challenge for the operators and maintainers. The nondestructive evaluation technology is rather mature and able to detect damage with considerable reliability during the periodic maintenance inspections. The emerging structural health monitoring methodology has great potential, because it will use on-board damage detection sensors and systems, will be able to offer on-demand structural health bulletins. Considerable fundamental and applied research is still needed to enable the development, implementation, and dissemination of structural health monitoring technology.

Keywords

References

  1. Acar, E., An, J., Haftka, R.T., Kim, N.H., Ifju, P.J. and Johnson, T.F. (2007), "Options for using data to update failure stress", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-1971.
  2. Acar, E., Kumar, S., Pippy, R.J., Kim, N.H. and Haftka, R.T. (2007), "Approximate probabilistic optimization using exact-capacity-approximate-response distribution (ECARD)", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-1973.
  3. Air Force Office of Scientific Research public website, http://www.wpafb.af.mil/AFRL/afosr/.
  4. Aldrin, J.C. and Knopp, J.S. (2006), "Crack characterization method with invariance to noise features for eddy current inspection of fastener sites", J. Nondest. Eval., 25(4), 165-181. https://doi.org/10.1007/s10921-006-0014-5
  5. Brockman, R.A., Huelsman, M.A. and John, R. (2005), Simulation of deformation modes for damage detection in turbine engine disks, Materials Damage Prognosis, J.M. Larsen et al. (Ed.), TMS 2005, pp. 197-201.
  6. Bruhn, E.F. (1973), Analysis and Design of Flight Vehicle Structures, Jacobs Publishing, Inc..
  7. Christodoulou, L. and Larsen, J.M. (2004), "Using materials prognosis to maximize the utilization potential of complex mechanical systems", JOM, 56(3), 15-19. https://doi.org/10.1007/s11837-004-0027-4
  8. Coppinger, R. (2004), Airbus and boeing back structural health monitoring, Flight International, 20 February 2007, http://www.flightglobal.com/articles/2007/02/20/212184/airbus-and-boeing-back-structural-monitoring.html.
  9. Cruse, T.A. (2004), "Future directions in NDE and structural health monitoring", J. Nondest. Eval., 23(3), 77-79. https://doi.org/10.1023/B:JONE.0000048863.83986.c9
  10. Full-scale fatigue test of CF-18 aircraft, http://iar-ira.nrc-cnrc.gc.ca/smpl/smpl_1a_e.html.
  11. Giurgiutiu, V. (2005), "Tuned lamb-wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring", J. Intel. Mat. Syst. Str., 16(4), 291-306. https://doi.org/10.1177/1045389X05050106
  12. Giurgiutiu, V., Bao, J. and Zagrai, A.N. (2006), Structural health monitoring system utilizing guided Lamb waves embedded ultrasonic structural radar, U.S. Patent Office #6,996,480 of February 7, 2006.
  13. Giurgiutiu, V. and Cuc, A. (2005), "Embedded nondestructive evaluation for structural health monitoring, damage detection, and failure prevention", Shock Vib. Digest, 37(2), 83-105. https://doi.org/10.1177/0583102405052561
  14. Giurgiutiu, V., Lin, B. and Doane, J. (2005), "Durability and survivability of piezoelectric wafer active sensors mounted on aluminum structures for aerospace vehicle health monitoring", Aeromat-2005, Integrated Systems Health Monitoring Session, 6-9 June 2005, Orlando, FL.
  15. Goldfine, N.J., Zilberstein, V., Washabaugh, A., Schlicker, D., Shay, I. and Grundy, D. (2003), "Eddy current sensor networks for aircraft fatigue monitoring", Mater. Eval., 61(7), 852-859.
  16. Jha, S.K., Caton, M.J. and Larsen, J.M. (2007), "A new paradigm of fatigue variability behavior and implications for life prediction", Mat. Sci. Eng. A, 468-470, 23-32. https://doi.org/10.1016/j.msea.2006.10.171
  17. Jha, S.K., Larsen, M. and Rosenberger, A.H. (2005), "The role of competing mechanisms in the fatigue-life variability of a titanium and gamma-TiAl alloy", JOM, 57(9), 50-54. https://doi.org/10.1007/s11837-005-0116-z
  18. Keating, E.G. and Dixon, M. (2003), Investigating Optimal Replacement of Aging Air Force Systems, ISBN 0-8330-3483-9, Rand Corporation, Santa Monica, CA, 2003.
  19. Keating, E.G., Snyder, D., Dixon, M. and Loredo, E.N. (2005), Aging Aircraft Repair-Replacement Decision with Depot Level Capacity as a Policy Choice Variable, ISBN 0-8330-3692-0, Rand Corporation, Santa Monica, CA, 2005.
  20. Knopp, J.S., Aldrin, J.C., Lindgren, E. and Annis, C. (2007), "Investigation of a model-assisted approach to probability of detection evaluation", AIP Conf. Proc., 894, 1775-1782.
  21. Knopp, J.S., Aldrin, J.C. and Misra, P. (2006), "Considerations in the validation and application of models for eddy current inspection of cracks around fastener holes", J. Nondest. Eval., 25(3), 123-138.
  22. Kovvali, N., Das, S., Chakraborty, D., Cochran, D., Papandreou-Suppappola, A. and Chattopadhyay, A. (2007), "Timefrequency based classification of structural damage", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-2055.
  23. Millwater, H., Larsen, J. and John, R. (2007), "Effects of residual stresses on probabilistic lifing of engine disk materials", Mat. Sci. Eng. A, 468-470, 129-136. https://doi.org/10.1016/j.msea.2006.10.169
  24. Raghavan, A. and Cesnik, C.E.S. (2007), "3-D elasticity-based modeling of anisotropic piezocomposite transducers for guided wave structural health monitoring", J. Vib. Acoust., 129(6), 739-751. https://doi.org/10.1115/1.2748776
  25. Rajadas, J. and Chattopadhyay, A. (2007), "Modeling of structural nonlinearities including damage using reduced order methods", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-2300.
  26. Ramu, P., Kim, N.H. and Haftka, R.T. (2007), "Inverse measure-based tail modeling approach for structural reliability estimation", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-1947.
  27. Salas, K.I. and Cesnik, C.E.S. (2009), "CLoVER: an alternative concept for damage interrogation in structural health monitoring systems", Aeronaut. J., 113(1144), 339-356. https://doi.org/10.1017/S000192400000302X
  28. Salas, K.I. and Cesnik, C.E.S. (2009), "Guided-wave excitation by a CLoVER transducer for structural health monitoring: theory and experiments", Smart Mater. Struct., 18(7), 075005. https://doi.org/10.1088/0964-1726/18/7/075005
  29. Sharma, V.K., Statham, S., Ruzzene, M. and Hanagud, S. (2007), "Automation in structural health monitoring using laser Doppler vibrometer", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 23-26 April 2007, Honolulu, Hawaii, paper # AIAA 2007-1727.
  30. Tata, U., Huang, H., Carter, R. and Chiao, J.C. (2009), "Exploiting patch antenna for strain measurement", Meas. Sci. Technol., 20(1), paper #015201 (stacks.iop.org/MST/20/015201). https://doi.org/10.1088/0957-0233/20/1/015201
  31. Wood, H.A. (1971), Fracture control procedures for aircraft structural integrity, AFFDL Report TR-2-89, WPAFB, Ohio, July 1971.