DOI QR코드

DOI QR Code

Surface modification of polypropylene membrane to improve antifouling characteristics in a submerged membrane-bioreactor: Ar plasma treatment

  • Zhou, Jin (College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Key Laboratory of Molecule-based Materials, Anhui Normal University) ;
  • Li, Wei (College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Key Laboratory of Molecule-based Materials, Anhui Normal University) ;
  • Gu, Jia-Shan (College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Key Laboratory of Molecule-based Materials, Anhui Normal University) ;
  • Yu, Hai-Yin (College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Key Laboratory of Molecule-based Materials, Anhui Normal University)
  • 투고 : 2009.08.07
  • 심사 : 2009.10.28
  • 발행 : 2010.01.25

초록

To improve the antifouling characteristics of polypropylene hollow fiber microporous membranes in a submerged membrane-bioreactor for wastewater treatment, the surface-modification was conducted by Ar plasma treatment. Surface hydrophilicity was assessed by water contact angle measurements. The advancing and receding water contact angles reduced after the surface modification, and hysteresis between the advancing and receding water contact angles was enlarged after Ar plasma treatment due to the increased surface roughness after surface plasma treatment. After continuous operation in a submerged membrane-bioreactor for about 55 h, the flux recovery after water cleaning and the flux ratio after fouling were improved by 20.0 and 143.0%, while the reduction of flux was reduced by 28.6% for the surface modified membrane after 1 min Ar plasma treatment, compared to those of the unmodified membrane. Morphological observations showed that the mean membrane pore size after Ar plasma treatment reduced as a result of the deposition of the etched species; after it was used in the submerged membrane-bioreactor, the further decline of the mean membrane pore size was caused by the deposition of foulants. X-ray photoelectron spectroscopy and infrared spectroscopy confirmed that proteins and polysaccharide-like substances were the main foulants in the precipitate.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Bodas, D. and Khan-Malek, C. (2007), "Hydrophilization and hydrophobic recovery of PDMS by oxygen plasma and chemical treatment--An SEM investigation", Sensor Actuat. B-Chem., 123(1), 368-373. https://doi.org/10.1016/j.snb.2006.08.037
  2. Buonomenna, M.G., Lopez, L.C., Favia, P., d'Agostino, R., Gordano, A. and Drioli, E. (2007), "New PVDF membranes: The effect of plasma surface modification on retention in nanofiltration of aqueous solution containing organic compounds", Water Res., 41(19), 4309-4316. https://doi.org/10.1016/j.watres.2007.06.033
  3. Chang, I.S., Bag, S.O. and Lee, C.H. (2001), "Effects of membrane fouling on solute rejection during membrane filtration of activated sludge", Process Biochem., 36(8-9), 855-860. https://doi.org/10.1016/S0032-9592(00)00284-3
  4. Choo, K.H. and Lee, C.H. (1996), "Membrane fouling mechanisms in the membrane-coupled anaerobic bioreactor", Water Res., 30(8), 1771-1780. https://doi.org/10.1016/0043-1354(96)00053-X
  5. Choo, K.H., Kang, I.J., Yoon, S.H., Park, H., Kim, J.H., Adiya, S. and Lee, C.H. (2000), "Approaches to membrane fouling control in anaerobic membrane bioreactors", Water Sci. Technol., 41(10-11), 363-371.
  6. Gu, J.S., Yu, H.Y., Huang, L., Tang, Z.Q., Li, W., Zhou, J., Yan, M.G. and Wei, X.W. (2009), "Chain-length dependence of the antifouling characteristics of the glycopolymer-modified polypropylene membrane in an SMBR", J. Membrane Sci., 326(1), 145-152. https://doi.org/10.1016/j.memsci.2008.09.043
  7. Her, N., Amy, G., Plottu-Pecheux, A. and Yoon, Y. (2007), "Identification of nanofiltration membrane foulants", Water Res., 41(17), 3936-3947. https://doi.org/10.1016/j.watres.2007.05.015
  8. Hu, M.X., Yang, Q. and Xu, Z.K. (2006), "Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators", J. Membrane Sci., 285(1-2), 196-205. https://doi.org/10.1016/j.memsci.2006.08.023
  9. Kang, I.J., Yoon, S.H. and Lee, C.H. (2002), "Comparison of the filtration characteristics of organic and inorganic membranes in a membrane-coupled anaerobic bioreactor", Water Res., 36(7), 1803-1813. https://doi.org/10.1016/S0043-1354(01)00388-8
  10. Kim, D.S., Kang, J.S. and Lee, Y.M. (2004), "The influence of membrane surface properties on fouling in a membrane bioreactor for wastewater treatment", Sep. Sci. Technol., 39(4), 833-854.
  11. Kwon, B., Lee, S., Cho, J., Ahn, H., Lee, D. and Shin, H.S. (2005), "Biodegradability, DBP Formation, and Membrane Fouling Potential of Natural Organic Matter:  Characterization and Controllability", Environ. Sci. Technol., 39(3), 732-739. https://doi.org/10.1021/es049919z
  12. Le-Clech, P., Marselina, Y., Ye, Y., Stuetz, R.M. and Chen, V. (2007), "Visualisation of polysaccharide fouling on microporous membrane using different characterisation techniques", J. Membrane Sci., 290(1-2), 36-45. https://doi.org/10.1016/j.memsci.2006.12.012
  13. Liu, R., Huang, X., Sun, Y.F. and Qian, Y. (2003), "Hydrodynamic effect on sludge accumulation over membrane surfaces in a submerged membrane bioreactor", Process Biochem., 39(2), 157-163. https://doi.org/10.1016/S0032-9592(03)00022-0
  14. Meng, F.G., Yang, F.L., Shi, B.Q. and Zhang, H.M. (2008), "A comprehensive study on membrane fouling in submerged membrane bioreactors operated under different aeration intensities", Sep. Purif. Technol., 59(1), 91- 100. https://doi.org/10.1016/j.seppur.2007.05.040
  15. Satyawali, Y. and Balakrishnan, M. (2009), "Effect of PAC addition on sludge properties in an MBR treating high strength wastewater", Water Res., 43(6), 1577-1588. https://doi.org/10.1016/j.watres.2009.01.003
  16. Wang, X.M. and Li, X.Y. (2008), "Accumulation of biopolymer clusters in a submerged membrane bioreactor and its effect on membrane fouling", Water Res., 42(4-5), 855-862. https://doi.org/10.1016/j.watres.2007.08.031
  17. Wei, Q., Liu, Y., Hou, D. and Huang, F. (2007), "Dynamic wetting behavior of plasma treated PET fibers", J. Mater. Process. Tech., 194(1-3), 89-92. https://doi.org/10.1016/j.jmatprotec.2007.04.001
  18. Yoon, S.H., Kang, I.J. and Lee, C.H. (1999), "Fouling of inorganic membrane and flux enhancement in membrane-coupled anaerobic bioreactor", Sep. Sci. Technol., 34(5), 709-724. https://doi.org/10.1080/01496399908951140
  19. Yu, H.Y., He, X.C., Liu, L.Q., Gu, J.S. and Wei, X.W. (2007a), "Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: N2 plasma treatment", Water Res., 41(20), 4703-4709. https://doi.org/10.1016/j.watres.2007.06.039
  20. Yu, H.Y., Hu, M.X., Xu, Z.K., Wang, J.L. and Wang, S.Y. (2005a), "Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment", Sep. Purif. Technol., 45(1), 8-15. https://doi.org/10.1016/j.seppur.2005.01.012
  21. Yu, H.Y., Lei, H. and Xu, Z.K. (2006a), "Enhancement of the Flux for Polypropylene Hollow Fiber Membrane in a Submerged Membrane-Bioreactor by Surface Modification", J. Environ. Sci., 18(6), 1050-1055. https://doi.org/10.1016/S1001-0742(06)60037-5
  22. Yu, H.Y., Tang, Z.Q., Huang, L., Cheng, G., Li, W., Zhou, J., Yan, M.G., Gu, J.S. and Wei, X.W. (2008), "Surface modification of polypropylene macroporous membrane to improve its antifouling characteristics in a submerged membrane-bioreactor: $H_{2}O$ plasma treatment", Water Res., 42(16), 4341-4347. https://doi.org/10.1016/j.watres.2008.05.028
  23. Yu, H.Y., Xie, Y.J., Hu, M.X., Wang, J.L., Wang, S.Y. and Xu, Z.K. (2005b), "Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: $CO_{2}$ plasma treatment", J. Membrane Sci., 254(1-2), 219-227. https://doi.org/10.1016/j.memsci.2005.01.010
  24. Yu, H.Y., Xu, Z.K., Lei, H., Hu, M.X. and Yanga, Q. (2007b), "Photoinduced graft polymerization of acrylamide on polypropylene microporous membranes for the improvement of antifouling characteristics in a submerged membrane-bioreactor", Sep. Purif. Technol., 53(1), 119-125. https://doi.org/10.1016/j.seppur.2006.07.002
  25. Yu, H.Y., Xu, Z.K., Xie, Y.J., Liu, Z.M. and Wang, S.Y. (2006b), "Flux Enhancement for Polypropylene Microporous Membrane in a SMBR by the Immobilization of Poly(N-vinyl-2-pyrrolidone) on the Membrane Surface", J. Membrane Sci., 279(1-2), 148-155. https://doi.org/10.1016/j.memsci.2005.11.046
  26. Zhu, X., Chian, K.S., Chan-Park, M.B.E. and Lee, S.T. (2005), "Effect of argon-plasma treatment on proliferation of human-skin-derived fibroblast on chitosan membrane in vitro", J. Biomed. Mater. Res. A, 73A(3), 264-274.

피인용 문헌

  1. Influence of low-temperature plasma and γ radiation on the surface properties of PET track membranes vol.7, pp.5, 2016, https://doi.org/10.1134/S2075113316050063
  2. Alleviation of membrane fouling in a submerged membrane bioreactor with electrochemical oxidation mediated by in-situ free chlorine generation vol.96, 2016, https://doi.org/10.1016/j.watres.2016.03.041
  3. Induced super hydrophilicity due to surface modification of polypropylene membrane treated by O2 plasma vol.257, pp.5, 2010, https://doi.org/10.1016/j.apsusc.2010.08.117
  4. Plasma deposition of silver nanoparticles on ultrafiltration membranes: Antibacterial and anti-biofouling properties vol.94, 2015, https://doi.org/10.1016/j.cherd.2014.09.014
  5. Surface and Electrochemical Properties of Plasma-Treated Polypropylene Track Membrane vol.10, pp.7, 2013, https://doi.org/10.1002/ppap.201200084
  6. Plasma Surface Treatment of BOPP Film by Dielectric Barrier Glow Discharge in Argon/Air vol.06, pp.14, 2015, https://doi.org/10.4236/jmp.2015.614205
  7. High hydrophilicity and excellent adsorption ability of a stretched polypropylene/graphene oxide composite membrane achieved by plasma assisted surface modification vol.5, pp.87, 2015, https://doi.org/10.1039/C5RA10310J
  8. Surface Modification of Cellulose Membrane by Air Plasma Treatment vol.770, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.770.112
  9. Rectification methods for the fouling of ultrafiltration hollow-fibre membranes as a result of excessive soluble iron vol.32, pp.1, 2011, https://doi.org/10.5004/dwt.2011.2763
  10. Surface and electrochemical properties of polypropylene track membrane modified by plasma of non-polymerizing gases vol.49, pp.7, 2013, https://doi.org/10.1134/s1023193513070070
  11. Improving hydrophilic and antimicrobial properties of membrane by adding nanoparticles of titanium dioxide and copper oxide vol.9, pp.6, 2010, https://doi.org/10.12989/mwt.2018.9.6.481
  12. A Review on Microbial Electrocatalysis Systems Coupled with Membrane Bioreactor to Improve Wastewater Treatment vol.7, pp.10, 2010, https://doi.org/10.3390/microorganisms7100372
  13. Performance and antifouling properties of PVDF/PVP and PSf membranes in MBR: A comparative study vol.11, pp.2, 2010, https://doi.org/10.12989/mwt.2020.11.2.159