DOI QR코드

DOI QR Code

Identification of beam crack using the dynamic response of a moving spring-mass unit

  • An, Ning (School of Civil Engineering, Beijing Jiaotong University) ;
  • Xia, He (School of Civil Engineering, Beijing Jiaotong University) ;
  • Zhan, Jiawang (School of Civil Engineering, Beijing Jiaotong University)
  • Received : 2010.07.26
  • Accepted : 2010.10.22
  • Published : 2010.12.25

Abstract

A new technique is proposed for bridge structural damage detection based on spatial wavelet analysis of the time history obtained from vehicle body moving over the bridge, which is different from traditional detection techniques based on the bridge response. A simply-supported Bernoulli-Euler beam subjected to a moving spring-mass unit is established, with the crack in the beam simulated by modeling the cracked section as a rotational spring connecting two undamaged beam segments, and the equations of motion for the system is derived. By using the transfer matrix method, the natural frequencies and mode shapes of the cracked beam are determined. The responses of the beam and the moving spring-mass unit are obtained by modal decomposition theory. The continuous wavelet transform is calculated on the displacement time histories of the sprung-mass. The case study result shows that the damage location can be accurately determined and the method is effective.

Keywords

References

  1. Bamnios, Y., Douka E. and Trochidis, A. (2002), "Crack identification in beam structures using FEM", J. Sound Vib., 256(2), 287-297. https://doi.org/10.1006/jsvi.2001.4209
  2. Bilello, C. and Bergman, L.A. (2004), "Vibration of damaged beams under a moving mass: theory and experimental validation", J. Sound Vib., 274, 567-582. https://doi.org/10.1016/j.jsv.2003.01.001
  3. Daubechies, I. (1992), Ten lectures on wavelets, CBMS-NSF regional conference series in applied mathematics, Society for Industrial and Applied Mathematics, Philadelphia.
  4. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  5. Douka, E., Loutridis, S. and Trochidis, A. (2003), "Crack identification in beams using wavelet analysis", Int. J. Solids Struct., 40, 3557-3569. https://doi.org/10.1016/S0020-7683(03)00147-1
  6. Gentile, A. and Messina, A. (2003), "On the continuous wavelet transforms applied to discrete vibrational data for detecting open cracks in damaged beams", Int. J. Solids Struct., 40, 295-315. https://doi.org/10.1016/S0020-7683(02)00548-6
  7. Han, J.G., Ren, W.X. and Sun, Z.S. (2005), "Wavelet packet based damage identification of beam structures", Int. J. Solids Struct., 42, 6610-6627. https://doi.org/10.1016/j.ijsolstr.2005.04.031
  8. Hong, J.C., Kim, Y.Y., Lee, H.C. and Lee, Y.W. (2002), "Damage detection using the Lipschitz exponent estimated by the wavelet transform applications to vibration modes of a beam", Int. J. Solids Struct., 39, 1803-1816. https://doi.org/10.1016/S0020-7683(01)00279-7
  9. Loutridis, S., Douka, E., Hadjileontiadis, L.J. and Trochidis, A. (2005), "A two-dimensional wavelet transform for detection of cracks in plates", Eng. Struct., 27, 1327-1338. https://doi.org/10.1016/j.engstruct.2005.03.006
  10. Mahmoud, M.A. and Abou Zaid, M.A. (2002), "Dynamic response of a beam with a crack subject to a moving mass", J. Sound Vib., 256(4), 591-603. https://doi.org/10.1006/jsvi.2001.4213
  11. Mallat, S. and Hwang, W.L. (1992), "Singularity detection and processing with wavelets", IEEE T. Inform. Theory, 38(2), 617-643. https://doi.org/10.1109/18.119727
  12. Masoud, S., Jarrah, M.A. and Maamory, M.Al. (1998), "Effect of crack depth on the natural frequency of a prestressed fixed-fixed beam", J. Sound Vib., 214(2), 201-212. https://doi.org/10.1006/jsvi.1997.1541
  13. Montalvão, D., Maia, N.M.M. and Ribeiro, A.M.R. (2006), "A review of vibration-based structural health monitoring with special emphasis on composite materials", Shock Vib. Digest, 38(4), 1-30.
  14. Narkis, Y. (1994), "Identification of crack location in vibrating simply-supported beams", J. Sound Vib., 172(4), 549-558. https://doi.org/10.1006/jsvi.1994.1195
  15. Narkis, Y. and Elmalah, E. (1996), "Crack identification in a cantilever beam under uncertain end condition", J. Mech. Sci., 38(5), 499-507. https://doi.org/10.1016/0020-7403(95)00071-2
  16. Philips, P. (2009), "A quasistatic crack propagation model allowing for cohesive forces and crack reversibility, Interact. Multiscale Mech., 2(1), 31-44. https://doi.org/10.12989/imm.2009.2.1.031
  17. Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  18. Sinha, J.K., Friswell, M.I. and Edwards, S. (2002), "Simplified models for the location of cracks in beam structures using measured", J. Sound Vib., 251(1), 13-38. https://doi.org/10.1006/jsvi.2001.3978
  19. Staszecski, W.J. (1998), "Structural and mechanical damage detection using wavelets", Shock Vib. Digest, 30(6), 457-472. https://doi.org/10.1177/058310249803000602
  20. Tada, H., Paris, P. and Irwin, G.. (1973), The stress analysis of cracks handbook, Hellertown, Pennsylvania: Del Research Corporation.
  21. Xiang, Z.H. and Zhang, Y. (2009), "Changes of modal properties of simply-supported plane beams due to damages", Interact. Multiscale Mech., 2(2), 153-175. https://doi.org/10.12989/imm.2009.2.2.153
  22. Yuen, M.M.F. (1985), "A numerical study of the eigen parameters of a damaged cantilever beam", J. Sound Vib., 103, 301-310. https://doi.org/10.1016/0022-460X(85)90423-7
  23. Zhu, X.Q. and Law, S.S. (2006), "Wavelet-based crack identification of bridge beam from operational deflection time history", Int. J. Solids Struct., 43, 2299-2317. https://doi.org/10.1016/j.ijsolstr.2005.07.024

Cited by

  1. Bridge Damage Identification from Moving Load Induced Deflection Based on Wavelet Transform and Lipschitz Exponent vol.16, pp.05, 2016, https://doi.org/10.1142/S0219455415500030
  2. A two-step approach for crack identification in beam vol.332, pp.2, 2013, https://doi.org/10.1016/j.jsv.2012.08.025
  3. Analysis and identification of multiple-cracked beam subjected to moving harmonic load 2018, https://doi.org/10.1177/1077546317694496
  4. Damage Identification in Bridges by Processing Dynamic Responses to Moving Loads: Features and Evaluation vol.19, pp.3, 2019, https://doi.org/10.3390/s19030463
  5. Time-frequency analysis of a coupled bridge-vehicle system with breathing cracks vol.5, pp.3, 2012, https://doi.org/10.12989/imm.2012.5.3.169
  6. Numerical Parametric Study on the Effectiveness of the Contact-Point Response of a Stationary Vehicle for Bridge Health Monitoring vol.11, pp.15, 2010, https://doi.org/10.3390/app11157028