DOI QR코드

DOI QR Code

On the kinematic coupling of 1D and 3D finite elements: a structural model

  • Yue, Jianguang (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Fafitis, Apostolos (Department of Civil and Environmental Engineering, Arizona State University) ;
  • Qian, Jiang (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2010.03.03
  • 심사 : 2010.05.19
  • 발행 : 2010.06.25

초록

In most framed structures the nonlinearities and the damages are localized, extending over a limited length of the structural member. In order to capture the details of the local damage, the segments of a member that have entered the nonlinear range may need to be analyzed using the three-dimensional element (3D) model whereas the rest of the member can be analyzed using the simpler one-dimensional (1D) element model with fewer degrees of freedom. An Element-Coupling model was proposed to couple the small scale solid 3D elements with the large scale 1D beam elements. The mixed dimensional coupling is performed imposing the kinematic coupling hypothesis of the 1D model on the interfaces of the 3D model. The analysis results are compared with test results of a reinforced concrete pipe column and a structure consisting of reinforced concrete columns and a steel space truss subjected to static and dynamic loading. This structure is a reduced scale model of a direct air-cooled condenser support platform built in a thermal power plant. The reduction scale for the column as well as for the structure was 1:8. The same structures are also analyzed using 3D solid elements for the entire structure to demonstrate the validity of the Element-Coupling model. A comparison of the accuracy and the computational effort indicates that by the proposed Element-Coupling method the accuracy is almost the same but the computational effort is significantly reduced.

키워드

참고문헌

  1. ABAQUS Theory Manual (2008), "Version 6.8", ABAQUS Inc., USA.
  2. Bai, G.L., Zhu, L.H., Zhao, C.L., Li, H.X. and Li, X.W. (2008), "Model test on behavior of direct air cooled condenser support platform under load and erathquake action", J. Build. Struct., 29(5), 42-49.
  3. Barenblatt, G.I. (1993), Micromerchanics of fracture, Theoretical and Applied Mechanics, Elsevier Science Publishers B.V., 25-52.
  4. Birtel, V. and Mark, P. (2006), "Parameterised finite element modeling of RC beam shear failure", ABAQUS User's Conference, 95-107.
  5. Cornelissen, H.A.W. and Reinhardt H.W. (1984), "Uniaxial tensile fatigue failure of concrete under constantamplitude and program loading", Mag. Concrete Res., 36(129), 216-226. https://doi.org/10.1680/macr.1984.36.129.216
  6. Cosenza, E., Manfredi, G. and Verderame, G.M. (2006), "A fibre model for push-over analysis of underdesigned reinforced concrete frames", Comput. Struct., 84(13-14), 904-916. https://doi.org/10.1016/j.compstruc.2006.02.003
  7. Desayi, P. and Krishnan, S. (1964), "Equation for the stress-strain curve of concrete", J. Am. Concrete Institute, 61, 345-350.
  8. Ganguly, S., Layton, J.B. and Balakrishna, C. (2000), "Symmetric coupling of multi-zone curved Galerkin boundary elements with finite elements in elasticity", Int. J. Numer. Method. Eng., 48, 663-654.
  9. Garusi, E. and Tralli, A. (2002), "A hybrid stress-assumed transition element for solid-to-beam and plate-to-beam connections", Comput. Struct., 80(2), 105-115. https://doi.org/10.1016/S0045-7949(01)00172-9
  10. GB50010-2002 (2002), Code for design of concrete structures, China Architecture and Building Press, Beijing.
  11. GB50017-2003 (2003), Code for design of steel structures, China Architecture and Building Press, Beijing.
  12. Glimm, J. and Sharp, D. (1997), "Multiscale science: a chanllenge for the twenty-first century", SIAM News 30(8), 1-7.
  13. Haas, M. and Kuhn, G. (2003), "Mixed-dimensional, symmetric coupling of FEM and BEM", Eng. Anal. Bound. Elem., 27(6), 575-582. https://doi.org/10.1016/S0955-7997(03)00012-2
  14. Helldorfer, B., Haas, M. and Kuhn, G. (2008), "Automatic coupling of a boundary element code with a commercial finite element system", Adv. Eng. Softw., 39(8), 699-709. https://doi.org/10.1016/j.advengsoft.2007.07.003
  15. Jason, L., Huerta, A., Pijaudier-Cabot, G. and Ghavamian, S. (2006), "An elastic plastic damage formulation for concrete: application to elementary tests and comparison with an isotropic damage model", Comput. Method. Appl. M., 195(52), 7077-7092. https://doi.org/10.1016/j.cma.2005.04.017
  16. Kim, H.S. and Hong, S.M. (1995), "Formulation of transition-elements for the analysis of coupled wall structures", Comput. Struct., 57(2), 333-344. https://doi.org/10.1016/0045-7949(94)00620-I
  17. Lee, J.H. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech. - ASCE, 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  18. Li, H.B., Han, G.M., Mang, H.A. and Torzicky, P. (1986), "A new method for the coupling of finite-element and boundary element discretized subdomains of elastic bodies", Comput. Method. Appl. M., 54(2), 161-185. https://doi.org/10.1016/0045-7825(86)90124-6
  19. Li, H.X. (2006), "Study on the support system for air cooled condenser of big power plant", Ph.D. Thesis, Xi'an University of Architecture and Technology, Xi'an.
  20. Li, Z.X., Zhou, T.Q., Chan, T.H.T. and Yu, Y. (2007), "Multi-scale numerical analysis on dynamic response and local damage in long-span bridges", Eng. Struct., 29(7), 1507-1524. https://doi.org/10.1016/j.engstruct.2006.08.004
  21. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  22. Mata, P., Barbat, A.H. and Oller, S. (2008), "Two-scale approach for the nonlinear dynamic analysis of RC structures with local non-prismatic parts", Eng. Struct., 30(12), 3667-3680. https://doi.org/10.1016/j.engstruct.2008.06.011
  23. McCune, R.W., Armstrong, C.G. and Robinson, D.J. (2000), "Mixed-dimensional coupling in finite element models", Int. J. Numer. Method. Eng., 49(6), 725-750. https://doi.org/10.1002/1097-0207(20001030)49:6<725::AID-NME967>3.0.CO;2-W
  24. Monaghan, D.J., Lee, K.Y., Armstrong, C.G. and Ou, H. (2000), "Miexed dimensional finite element analysis of frame models", 10th ISOP Conference, Seattle, 263-269.
  25. Oliver, J., Linero, D.L., Huespe, A.E. and Manzoli, O.L. (2008), "Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach", Comput. Method. Appl. M., 197(5), 332-348. https://doi.org/10.1016/j.cma.2007.05.017
  26. Rong, Z. (2006), "An experimental research on seismic behavior of great size thin wall reinforced concrete columns", M.D. Thesis, Xi'an University of Architecture and Technology, Xi'an.
  27. Shim, K.W., Monaghan, D.J. and Armstrong, C.G. (2002), "Mixed dimensional coupling in finite element stress analysis", Eng. Comput., 18(3), 241-252. https://doi.org/10.1007/s003660200021
  28. Spacone, E. and El-Tawil, S. (2004), "Nonlinear analysis of steel-concrete composite structures: state of the art", J. Struct. Eng. - ASCE, 130(2), 159-168. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(159)
  29. Tu, F. (2006), "Experimental study and nonlinear finite analysis on seismic behavior of reinforced concrete pipe columns with large size and thin wall", M.D. Thesis, Xi'an University of Architecture and Technology, Xi'an.
  30. Wang, H.Y., He, G.W., Xia, MF., Ke, F.J. and Bai, Y.L. (2004), "Multiscale coupling in complex mechanical systems", Chem. Eng. Sci., 59(8-9), 1677-1686. https://doi.org/10.1016/j.ces.2004.01.024

피인용 문헌

  1. Three-dimensional multiscale finite element models for in-service performance assessment of bridges pp.10939687, 2019, https://doi.org/10.1111/mice.12424