Membrane Journal (멤브레인)

The Membrane Society of Korea (한국막학회)
권호 표지

Preparation of Higher Reinforced PVDF Hollow Fiber Microfiltration Membrane

고강도 PVDF 중공사 정밀여과막 제조 특성

  • Received : 2010.10.26
  • Accepted : 2010.12.22
  • Published : 2010.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper was carried out to study the preparation condition and the permeation flux of reinforced poly(vinylidene fluoride) (PVDF) hollow fiber microfiltration (MF) membrane with the solvent, additive, second miscible polymer, and preparation condition used poly(vinylidene fluoride) (PVDF) such as a material with the excellent chemical stability and the milder preparation condition. The performance of the reinforced MF membrane prepared obtained the average $0.3{\mu}m$ pore size, $42kg_f/cm^2$ tensile strength, and the high water flux of 600 LMH. The change of membrane performance with various additives was considerably affected on the water flux and rejection. For hydrophilic modification of hydrophobic PVDF MF membrane, the MF membrane might be prepared with a prefer water flux and rejection by addition of hydrophilic poly(methyl methacrylate) (PMMA).

화학적 안정성이 양호하고, 제막조건이 온화한 재료인 poly(vinylidene fluoride) (PVDF)를 주재료로 사용하여 용매, 첨가제, 혼합고분자 및 제막조건의 변화에 따른 고강도 친수성 정밀여파(microfiltration, MF) 중공사 분리막의 실험에 의해 고찰하였다. 제조된 MF 중공사막의 막성능은 평균 공경 $0.3{\mu}m$, 인장강도 $42kg_f/cm^2$, 순수 투과유량은 600 LMH을 얻었다. 제막과정에서 다양한 첨가제의 막성능을 검토한 결과는 순수투과유량과 제거율에 상당한 영향을 미치고 있음을 알 수 있었다. MF막의 친수성을 개선하기 위해 소수성 PVDF와 상호 용해성 이 좋은 친수성 poly(methyl methacrylate) (PMMA)를 혼합하여 투과성능과 제거율을 개선한 우수한 친수성 MF막을 제조할 수 있었다.

Keywords

References

  1. T. D. Brock, "Membrame Filtration", Springer-Verlag, NY (1983).
  2. K. C. Ingham, T. F. Bushy, Y. Shahelstrom, and F. Castino, "Ultrafiltration Membrane and Application", Plenum Press, NY (1980).
  3. S. Najarian and B. Bellhouse, "Effect of liquid pulsation on protein fractionation using ultrafiltration", J. Membr. Sci., 114, 245 (1996). https://doi.org/10.1016/0376-7388(96)00004-X
  4. L. Broussous, E. Prouzet, L. Beque, and A. Larbot, "An experimental study of hellically stamped ceramic microfiltration membrane using bentinite suspension", Sep. & Purification Tech., 24, 205 (2001). https://doi.org/10.1016/S1383-5866(01)00128-9
  5. G. Capa, S. S. Aygun, and M. R. Gecit, "Trearment of silk production wastewaters by membrane processes for sericin recovery", J. Membr. Sci., 325, 920 (2008). https://doi.org/10.1016/j.memsci.2008.09.020
  6. S. J. Shin, J. P. Kim, H. J. Kim, J. H. Jeon, and B. R. Min, "Preparation and characterization of polyethersulfone microfiltration membrane by a 2-methoxyethanol additive", Desalination, 186, 1 (2005). https://doi.org/10.1016/j.desal.2005.03.092
  7. J. G. Choi and K. Y. Chung, "Permeation characteristics of the microfiltration tubular module using the discharged rod", Membrane Journal, 19, 285 (2009).
  8. C. Barth, M. C. Goncalves, A. T. N. Pires, J. Roeder, and B. A. Wolf, "Asymetric polysulfone and polyethersulfone membranes: effect of thermodynamic conditions during formation on their performance", J. Membr. Sci., 169, 287 (2000). https://doi.org/10.1016/S0376-7388(99)00344-0
  9. N. Kim, "Effect of 2-butoxyethanol additive in the casting solution on the characteristics of nonsolvent vapor induced phase inversion PES membranes", Membrane Journal, 20, 76 (2010).
  10. H. C. Shih, Y. S. Yeh, and H. Yasuda, "Morphology of microporous poly(vinylidene fluoride) membranes studied by gas permeation and scanning electron microscopy", J. Membr. Sci., 50, 299 (1990). https://doi.org/10.1016/S0376-7388(00)80627-4
  11. S. Munari, A. Bottino, and G. Capannelli, "Casting and performance of polyvinylidene fluoride based membranes", J. Membr. Sci., 16, 181 (1983). https://doi.org/10.1016/S0376-7388(00)81309-5
  12. V. Laninovic, "relationship between type of non-solvent additive and properties of polyethersulfone membranes", Desalination, 186, 39 (2005). https://doi.org/10.1016/j.desal.2005.01.017
  13. S. P. Nunes and K. V. Peinemann, "Ultrafiltration membranes from PVDF/PMMA blends", J. Membr. Sci., 73, 25 (1992). https://doi.org/10.1016/0376-7388(92)80183-K
  14. Y. J. Choi and B. C. Kang, "Effect of ether-types alcohols on pore formation in preparing an asymmetrically porous polysulfone membrane", Membrane Journal, 20, 135 (2010).