참고문헌
- Rosa, P., Karayiannis, T.G. and Collins, M.W, 2009, “Single-Phase Heat Transfer in Microchannels : The Importance of Scaling Effects,” Applied Thermal Engineering, Vol. 29, No. 17-18, pp. 3447-3468. https://doi.org/10.1016/j.applthermaleng.2009.05.015
- Papautsky, I., Brazzle, J., Ameel, T. and Frazier., A. B., 1998, “Laminar Fluid Behavior in Microchannels Using Micropolar Fluid Theory,” Sensors and Actuators, Vol. 73, No. 1-2, pp. 101-108.
- Morini, G.L, 2004, “Single-Phase Convective Heat Transfer in Microchannels : A Review of Experimental Results,” International Journal of Thermal Sciences, Vol. 43, No. 7, pp. 631-651. https://doi.org/10.1016/j.ijthermalsci.2004.01.003
- Wu, P. and Little, W.A, 1983, “Measurement of Friction Factors for the Flow of Gases in Very Fine Channels Used for Microminiature Joule–Thomson Refrigerators,” Cryogenics, Vol. 23, No. 5, pp. 273-277. https://doi.org/10.1016/0011-2275(83)90150-9
- Wu, P. and Little, W.A, 1984, “Measurement of the Heat Transfer Characteristics of Gas Flow in Fine Channel Heat Exchangers Used for Microminiature Refrigerators,” Cryogenics, Vol. 24, No. 8, pp. 415-419. https://doi.org/10.1016/0011-2275(84)90015-8
- Wilding, P., Shoffner, M.A. and Kircka, L.J., 1994, “Manipulation and Flow of Biological Fluids in Straight Channels Micromachined in Silicon,” Clinical Chemistry, Vol. 40, pp. 43-47.
- Mala, G.M. and Li, D., 1999, “Flow Characteristics of Water in Microtubes,” International Journal of Heat and Fluid Flow, Vol.20, No.2, pp. 142-148. https://doi.org/10.1016/S0142-727X(98)10043-7
- Hu, Y., Werner, C. and Li, D., 2003, "Influence of Three-Dimensional Roughness on Pressure-Driven Flow Through Microchannels," Trans. ASME Journal of Fluids Engineering, Vol. 125, No. 5, pp. 871-879. https://doi.org/10.1115/1.1598993
- Sun, H. and Faghri, M., 2003, "Effect of Surface Roughness on Nitrogen flow in a Microchannel Using the Direct Simulation Monte Carlo Method," Numerical Heat Transfer - Part A, Vol. 43, No. 1, pp. 1-8. https://doi.org/10.1080/10407780307302
- Gad-el-Hak, M., 1999 "The Fluid Mechanics of Microdevices : The Freeman Scholar Lecture," Trans. ASME Journal of Fluids Engineering, Vol. 121, No. 1, pp. 5-33. https://doi.org/10.1115/1.2822013
- Chen, S. and Doolen, G.D., 1998, “Lattice Boltzmann Method for Fluid Flows," Annual Review of Fluid Mechanics, Vol. 30, pp.329-364. https://doi.org/10.1146/annurev.fluid.30.1.329
- Yoon, J.Y., Han, G.S. and Byun, S.J., 2005, “Optimization of Passive Mixer for Enhanced Mixing in a Micro-channel by Using Lattice Boltzmann Method,” Trans. of the KSME(A), Vol. 29, No. 5, pp.707-715.
- Bhatnagar, P.L, Gross, E.P. and Krook, M., 1954, "A Model for Collision Processes in Gases. I : Small Amplitude Processes in Charged and Neutral One-Component System," Physical Review, Vol. 94, No. 5, pp. 511-525. https://doi.org/10.1103/PhysRev.94.511
- Qian, Y.H., d'Humieres, D. and Lallemand, P., 1992, "Lattice BGK Models for Navier-Stokes Equation," Europhysics Letters, Vol. 17, No. 6, pp. 479-484. https://doi.org/10.1209/0295-5075/17/6/001
- Li, Z., Du, D. and Guo, Z., 2003, "Experimental Study on Flow Characteristics of Liquid in Circular Microtubes," Microscale Thermophysical Engineering, Vol. 7, No. 3, pp. 253-265. https://doi.org/10.1080/10893950390219083
- Succi, S., 2001, The Lattice Boltzmann Equation for Fluid Dynamics and Beyond, Clarendon Press Oxford, New York, pp. 77-96.
피인용 문헌
- Numerical Investigation of Mixing Characteristics in a Cavity Flow by Using Hybrid Lattice Boltzmann Method vol.37, pp.7, 2013, https://doi.org/10.3795/KSME-B.2013.37.7.683
- Numerical Investigation of Pollutant Dispersion in a Turbulent Boundary Layer by Using Lattice Boltzmann-Subgrid Model vol.35, pp.2, 2011, https://doi.org/10.3795/KSME-B.2011.35.2.169
- Numerical Investigation of Mixing Characteristics in Cavity Flow at Various Aspect Ratios vol.39, pp.1, 2015, https://doi.org/10.3795/KSME-B.2015.39.1.079