References
- Sasso, M., Newaz, G. and Amodio, D., 2007, “Material Characterization at High Strain Rate by Hopkinson Bar Tests and Finite Element Optimization,” Materials Science and Engineering A, Vol. 487, pp. 289-300. https://doi.org/10.1016/j.msea.2007.10.042
- Hopkinson, B., 1914, “A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets,” Philos Trans R Soc Lond Series A, Vol. 213, pp. 437-452. https://doi.org/10.1098/rsta.1914.0010
- Kolsky, H., 1949, “An Investigation of the Mechanical Properties of Materials at very High Rates of Loading,” Proc Phys Soc Lond Sec B Vol. 62, pp. 676-700. https://doi.org/10.1088/0370-1301/62/11/302
- Kolsky, H., 1949, “An Investigation of the Mechanical Studies in Plastic Wave Propagation,” J Mech Phys Solids, Vol. 10, pp. 195-223.
- Kolsky, H., 1963, Stress Waves in Solids, Dover Publications Inc., New York.
- Forrestal, M. J., Wright, T. W. and Chen, W., 2007, “The Effect of Radial Inertia on Brittle Samples During the Split Hopkinson Pressure Bar Test,” International Journal of Impact Engineering, Vol. 34, pp. 405-411. https://doi.org/10.1016/j.ijimpeng.2005.12.001
- Nicholas, T., 1982, “Material Behavior at High Strain Rates,” Impact Dynamics [chapter 8], New York: Wiley.
- Franz, C. E., Follansbee, P. S. and Wright, W.H., 1984. “New Experimental Techniques with the Split Hopkinson Pressure Bar,” In: Berman, I. and Schroeder, J. W., editors., Eighth International Conference On High Energy Rate Fabrication, Pressure Vessel and Piping Division. ASME.
- Nemat-Nasser, S., Isaacs, J. B. and Starrett, J. E., 1991, “Hopkinson Techniques for Dynamic Recovery Experiments,” Proc R Soc Lond A, Vol. 435, pp. 371-391. https://doi.org/10.1098/rspa.1991.0150
- Tamesh, K. T. and Narasimhan, S., 1996, “Finite Deformations and the Dynamic Measurement of Radial Strains in Compression Koldky Bar Experiments,” Int. J Solids Struct. Vol. 33, pp. 3723-3738. https://doi.org/10.1016/0020-7683(95)00206-5
- Gray, G. T., 2000, “Classic Split-Hopkinson Pressure Bar Technique,” ASM Handbook 8, Mechanical Testing and Evaluation ASM International, Materials Park, OH, 44073-0002.
- Lee, O. S., Chong, J. H., Kang, H. S. and Kim, J. H., 1997, “Constitutive-law Under High Strain Rate Loading,” Proc. of KSPE, Fall, pp. 724-727.
- Pochhammer, L., 1876, “On the Progagation Velocities of Small Oscillations in an Unlimited Isotropic Circular Cylinder,” J. Reine Angewandte Math, Vol. 81 p. 324.
- Chree, C., 1889, “The Equations of an Isotropic Elastic Solid in Polar and Cylindrical Coordinates, Their Solutions and Applications,” Cambridge Phil. Soc. Trans., Vol. 14, p. 250.
- Gorham, D. A., Pope, P. H. and Cox, O., 1984, “Sources of Error in very High Strain Rate Compression Tests,” Proceedings of the Third Conference on the Mechanical Properties of Materials at High Rates of Strain, Oxford, 9-12 april, 1984, Conference series, No. 70, Instityte of Physics, Great Britain, pp. 151-158.
- Hartley, R. S., Cloete, T. J. and Nurick, G. N., 2007, “An Experimental Assessment of Friction Effects in the Split Hopkinson Pressure Bar Using the Ring Compression Test,” International Journal of Impact Engineering, Vol. 34, pp. 1705-1728. https://doi.org/10.1016/j.ijimpeng.2006.09.003
- Meng, H. and Li, Q. M., 2003, “Correlation Between the Accuracy of a Shpb Test and the Stress Uniformity Based on Numerical Experiments,” International Journal of Impact Engineering, Vol. 28, pp. 537-555. https://doi.org/10.1016/S0734-743X(02)00073-8
- Lee, O. S., Kim, G. H. and Hwang, S. W., 2000, “Determination of Deformation Behavior of the A16061-T6 Under High Strain Rate Tensile Loading Using SHPB Technique,” Trans. of the KSME(A), Vol. 24, No. 12, pp. 3033-3039.
- Park, K. J., Yang, H. M. and Min, O. K., 2001, “The Effect of Temperature in Hign Temperature SHPB Test,” Proc. of the KSME, Fall, pp. 349-354.
- Yang, H. M., and Min, O. K., 2006, “Constitutive Equation for SM45C at High Temperature and High Strain Rate,” Proc. of the KSME, Fall, pp. 21-25.
- Bertholf, L. D. and Karnes, C. H., 1975, “Two-Dimensional Analysis Of The Split Hopkins Pressure Bar System,” J. Mech. Phys. Solids, Vol. 23, pp. 1-19. https://doi.org/10.1016/0022-5096(75)90008-3
- HIll, R., 1950, The Mathematical Theory of Plasticity, Oxford University Press, London, p. 277.
Cited by
- A Numerical Investigation into the Tensile Split Hopkinson Pressure Bars Test for Sheet Metals vol.421, pp.1662-7482, 2013, https://doi.org/10.4028/www.scientific.net/AMM.421.464
- Measurement of a Nearly Friction-Free Stress–Strain Curve of Silicone Rubber up to a Large Strain in Compression Testing vol.58, pp.9, 2018, https://doi.org/10.1007/s11340-018-0426-z