한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제27권2호
  • /
  • Pages.86-93
  • /
  • 2010
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

틸팅 인덱스 테이블 구조해석 및 최적형상 설계에 관한 연구

A Study on Structural Analysis and Optimum Shape Design of Tilting Index Table

  • 이문재 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 메카트로닉스공학부)
  • 발행 : 2010.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. In this study, structural analysis is carried out by FEM simulation using the commercial software ANSYS Workbench 11 to develop tilting index table using direct drive motor. The shape of the tilting index table obtained from the optimization was analyzed and compared with the initial model. Also, the initial model was modified based on the optimization model and the result was verified to have the acceptable improvement.

키워드

참고문헌

  1. Choi, U. D., "High Precision CNC Index Table Development," Sung Rim Co. Ltd., pp. 1-9, 2001.
  2. Choi, H. J., "Development of High-Speed and Intelligent Machine Tools Used for Cutting Mold." Daegu Machinery Institute of Components & Materials, pp. 10-12, 2008.
  3. Moaveni, S., "Finite Elements Analysis," Scitech, pp. 775-781, 2003.
  4. Lee, S. S., Hwang, Y. J. and Kim, H. J., "CATIA V5 release 14," Gyeongsang National University Press, pp. 12-13, 2005.
  5. Yi, J. W., Park, J. S., Lee, K. H. and Park, G. J., "Development of and Optimization Algorithm Using Orthogonal Arrays in Discrete Space," Trans. of KSME(A), Vol. 25, No. 10, pp. 1621-1626, 2001.
  6. Arora, J. S., "Introduction to Optimum Design," McGraw-Hill, pp. 8-9, 2003.
  7. Vanderplaats, G. N., "Structural Design Optimization Status and Direction," Journal of Aircraft, Vol. 36, No. 1, pp. 11-20, 1999. https://doi.org/10.2514/2.2440
  8. Lee, S. C. and Kang, S. Y., "Structural Analysis and Optimal Design of Eddy Current Brake Frame," Journal of KSPE, Vol. 21, No. 5, pp. 106-113, 2004.
  9. Lee, J. S., "A Study on the Optimum Shape of Rope Braken," Journal of KSMTE, Vol. 14, No. 1, pp. 101-107, 2005.
  10. Lee, M. J., Jung, J. W., Lee, C. M. and Lee, T. H., "Evaluation of Foundation Design for Tilting Index Table," Proc. of KSMPE Spring Conference, pp. 77-80, 2009.
  11. Jo, Y. J., Jeon, E. C. and Kang, J. H., "A Study on the Optimum Design of Independent Suspension Final Reduction Gear," Journal of KSMPE, Vol. 7, No. 4, 135-141, 2008.
  12. Kim, H. S., Ahn, C. W., Choi, K. H. and Park, J. H., "Shape Optimization of a Bogie frame for the Reduction of its Weight," Journal of KSPE, Vol. 19, No. 9, pp. 186-192, 2002.