모형실험을 통한 콘크리트 블록 및 시공이음부의 기밀성 측정

Measurement of Air Tightness of Concrete Block and its Construction Joint from a Model Experiment

  • 김형목 (한국지질자원연구원 지구환경연구본부) ;
  • 류동우 (한국지질자원연구원 지구환경연구본부) ;
  • 신중호 (한국지질자원연구원 지구환경연구본부) ;
  • 송원경 (한국지질자원연구원 지구환경연구본부)
  • 투고 : 2010.11.07
  • 심사 : 2010.12.08
  • 발행 : 2010.12.31

초록

대용량 전력에너지저장시설로서의 복공식 압축공기 지하저장시설의 기밀시스템을 구성하는 콘크리트 라이닝 및 현장 타설 과정에서 발생하는 시공이음부의 투기특성을 파악하고자 콘크리트 블록시료를 이용한 모형실험을 수행하였다. 시공이음부의 투과계수는 콘크리트 블록보다 약 $10^1{\sim}10^4$ 배 정도의 투과성이 큰 것으로 파악되어, 현장 타설과정에서 시공이음부의 품질관리가 저장시설의 기밀성능 확보 관점에서 매우 중요함을 확인하였다. 또한, 접합면에 아크릴계 접착제를 타설함으로써 시공이음부의 투과계수를 콘크리트 블록 수준까지 감소시킬 수 있었으며 콘크리트 블록의 초기 수분함량이 높을수록 투과계수가 감소하여 기밀성능을 향상시킬 수 있음을 확인하였다.

Underground compressed air energy storage (CAES) system in a lined rock cavern is considered one of the promising large-scale energy storage technologies. In this study, permeabilities of concrete lining block and its construction joint, which are the major components of an air tightness system of the undeground CAES, were measured from a model experiment. From the experiment, it was found that intrinsic permeability of construction joint was larger than that of concrete block by the order scale of $10^1{\sim}10^4$, so that it would be very important to control the quality of construction joints in-situ in order to secure air tightness of storage system. And the permeability of construction joint could be decreased as low as that of the concrete block by pasting an acryl-type adhesive on bonding surfaces. Higher degrees of water saturation of the concrete block resulted in the lower permeability, which is more preferable in the viewpoint of air tightness of storage cavern.

키워드

참고문헌

  1. 김형목, 류동우, 신중호, 2008, 굴착영향영역 투수특성의 실험적 평가기술, 터널과 지하공간, 18(2), pp. 91-97.
  2. 김형목, 류동우, 정소걸, 송원경, 2009, 일본의 압축공기 지 하저장 기술, 2009년 한국암반공학회 춘계학술발표회논문집, pp. 9-19.
  3. 김형목, 류동우, 정소걸, 송원경, 2009, 일본의 압축공기 지하저장 기술, 2009년 한국암반공학회 춘계학술발표회논문집, pp. 9-19.
  4. 소형석, 소양섭, 2000, 콘크리트의 투기성과 압축강도 사이의 관련성, 대한건축학회 논문집-구조계, 16(11), pp.107-112
  5. Abbas, A., Carcasses, M., Ollivier, J.P., 1999, Gas permeability of concrete in relation to its degree of saturation, Materials and Structures, Vol. 32, pp. 3-8. https://doi.org/10.1007/BF02480405
  6. Horne, R.N., Modern well test analysis, Petroway, Jnc., 1995.
  7. Jones, S.C., 1972, A rapid accurate unsteady-state Klinkenberg parameter, SPE journal, pp. 383-397.
  8. Neville, A., 1996, Properties of concrete, 4th ed., Wiley, pp. 490-497.
  9. Mehta, P., Monteiro, P., 2005, Concrete: Microstructure, Properties, and Materials, 3 ed., McGraw-Hill Professional, pp. 125-130.
  10. Sanjuan, M. A., Munoz-Martialay, R., 1996, Influence of the water/cement ratio on the air permeability of concrete, Journal of Materials Science, 31, pp. 2829-2832. https://doi.org/10.1007/BF00355989
  11. Tanikawa, W., Shimamoto, T., 2006, Klinkenberg effect for gas permeability and its comparison to water permeability for porous sedimentary rocks, Hydrol. Earth Syst. Sci. Discuss., 3, pp. 1315-1338. https://doi.org/10.5194/hessd-3-1315-2006
  12. Tezuka, M., Matsui, I., Henmi, Y., Moriya, A., 2007, Proposal for water-proof testing method of placing joint and cracking parts of concrete under high pressure, AIJ J. Technol. Des. Vol. 13, No. 26, pp. 411-414. https://doi.org/10.3130/aijt.13.411
  13. 氏家勲, 菊地一義, 佐藤良一, 長龍重義,1995, 新旧 コンクリートの打継目の透気性状に影響を及ぼす要因 に関する研究, コンクリート工学年次論文報告集, Vol. 17, No. 1, pp. 747-752.