참고문헌
- 7-Leaders Corp. (2007/2008), End mills, Drills, Reamers Solid Carbide Cutting Tools Catalog, 39.
- Cakir, O., Kiyak, M., and Altan, E. (2004), Comparison of gases applications to wet and dry cutting in turning, Journal of Materials Processing Technology, 153, 35-41. https://doi.org/10.1016/j.jmatprotec.2004.04.190
- Dhar, N. R., Islam, M. W., and Mithu, M. A. H. (2006), The influence of minimum quantity lubricant (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel, Journal of Materials Processing Technology, 171, 93-99. https://doi.org/10.1016/j.jmatprotec.2005.06.047
- Diniz, A. E. and Micaroni, R. (2002), Cutting conditions for finish turning process aiming: the use of dry cutting, International Journal of Machine Tools and Manufacture, 42, 899-904. https://doi.org/10.1016/S0890-6955(02)00028-7
- Dolinsek S., Sustarsic B., and Kopac J. (2001), Wear mechanisms of cutting tools in high-speed cutting processes, Wear, 250, 349-356. https://doi.org/10.1016/S0043-1648(01)00620-2
- Gunter, K. L. and Sutherland, J. W. (1999), An experimental investigation into the effect of process conditions on the mass concentration of cutting fluid mist in turning, Journal of Cleaner Production, 7, 341-350. https://doi.org/10.1016/S0959-6526(99)00150-X
- Kishawy, H. A., Dumitrescu, Ng, E. G., and Elbestawi, M. A. (2005), Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy, International Journal of Machine Tools and Manufacture, 45, 219-227. https://doi.org/10.1016/j.ijmachtools.2004.07.003
- Ii, M., Eda, H., Imai, T., Nishimura, M., Kawasaki, T., Shimizu, J., Yamamoto T., and Zhou, L. (2000), Development of water-content cutting fluids with a new concept fire prevention and environmental protection, Journal of the International Societies for Precision Engineering and Nanotechnology, 24, 231-236.
- Rahman, M., Kumar, A. S., and Salam, M. U. (2002), Experimental evaluation on the effect of minimal quantities of lubricant in milling, International Journal of Machine Tools and Manufacture, 2, 539-547.
- Somkiat, T. (2009), In-process investigation of turning process applied with and without cutting fluid, Journal of mechanical engineering, 6, 85-102.
- Sutherland, J. W., Kulur, V. N., and King, N. C. (2000), An experimental investigation of air quality in wet and dry turning, Annals of the CIRP, 49, 61-64. https://doi.org/10.1016/S0007-8506(07)62896-0
- Thepsonthi, T., Hamdi, M., and Mitsui, K. (2009), Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills, International Journal of Machine Tools and Manufacture, 49, 156-162. https://doi.org/10.1016/j.ijmachtools.2008.09.007
- Varadarajan, A. S., Philip, P. K., and Ramamoorthy, B. (2002), Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning, International Journal of Machine Tools and Manufacture, 42, 193-200. https://doi.org/10.1016/S0890-6955(01)00119-5
- Weinert, K., Inasaki, I., Sutherland, J. W., and Wakabayashi, T. (2004), Dry machining and minimum quantity lubrication, Annals of the CIRP, 53, 511-537. https://doi.org/10.1016/S0007-8506(07)60027-4
- Tasdelen B., Thordenberg H., and Olofsson D. (2008), An experimental investigateion on contact length during minimum quantity lubrication (MQL) machining, Journal of Materials Processing Technology, 203, 221-231. https://doi.org/10.1016/j.jmatprotec.2007.10.027
피인용 문헌
- Prediction of surface roughness in ball-end milling process by utilizing dynamic cutting force ratio vol.28, pp.1, 2017, https://doi.org/10.1007/s10845-014-0958-8
- Investigation of Dry Cutting and Applications of Cutting Fluid in Ball-End Milling Process vol.291-294, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.291-294.3013
- Surface Roughness Prediction in Ball-End Milling Process for Aluminum by Using Air Blow Cutting vol.418-420, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.418-420.1428
- Intelligent Prediction of Tool Wear in Ball-End Milling Process Based on Dimensionless Cutting Force Ratio vol.799-800, pp.1662-7482, 2015, https://doi.org/10.4028/www.scientific.net/AMM.799-800.312