Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis on Current Limiting and Voltage Sag Compensating Characteristics of a SFCL using Magnetic Coupling of Parallel Connected Two Coils

병렬연결된 두 코일의 자기결합을 이용한 초전도 전류제한기의 전류제한 및 전압강하 보상 특성 분석

  • 임성훈 (숭실대학교 전기공학부)
  • Published : 2010.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The superconducting fault current limiter (SFCL) plays a role in compensating the voltage sag of the sound feeder adjacent to the fault feeder as well as the fault current limiting operation of the fault feeder. Especially, the SFCL using magnetic coupling of two coils with parallel connection has different voltage sag compensating and current limiting characteristics due to the winding direction and the inductance ratio of two coils. In this paper, the current limiting and the voltage sag compensating characteristics of a SFCL using magnetic coupling of parallel connected two coils were analyzed. Through the analysis on the experimental results considering the winding direction of two coils, the SFCL designed with the additive polarity winding was shown to have the higher limited fault current than the SFCL designed with the subtractive polarity winding. In addition, it could be confirmed that the higher fault current limitation of the SFCL could be contributed to the higher load voltage sag compensation.

Keywords

References

  1. E. Thuries, V. D. Pham, Y. Laumond, T. Verhaege, A. Fevrier, M. Collet, and M. Bekhaled, "Toward the superconducting fault current limiter", IEEE Trans. On Power Del., Vol. 6, No. 2, p. 801, 1991. https://doi.org/10.1109/61.131138
  2. W. Paul and M. Chen, "Superconducting control for surge currents", IEEE Spectrum, Vol. 35, p. 49, 1998.
  3. S.-H. Lim, H.-S. Choi, D.-C. Chung, S.-C. Ko, and B.-S. Han, "Impedance variation of a flux-lock type SFCL dependent on winding direction between coil 1 and coil 2", IEEE Trans. Appl. Supercond., Vol. 15, No. 2, p. 2039, 2005. https://doi.org/10.1109/TASC.2005.849446
  4. S.-H. Lim, "Operational characteristics of a flux-lock type SFCL with series connection of two coils", IEEE Trans. Appl. Supercond., Vol. 17, No. 2, p. 1895, 2007. https://doi.org/10.1109/TASC.2007.899869
  5. S.-H. Lim, H.-S. Choi, and B.-S. Han, "Fault current limiting characteristics due to winding direction between coil 1 and coil 2 in a flux-lock type SFCL", Physica C, Vol. 416, p. 34, 2004. https://doi.org/10.1016/j.physc.2004.08.019
  6. S.-H. Lim, J.-F. Moon, and J.-C. Kim, “Current limiting and recovery characteristics of SFCLs using magnetic coupling of two coils”, IEEE Trans. Appl. Supercond., Vol. 19, No. 3, p. 1900, 2009. https://doi.org/10.1109/TASC.2009.2017710