DOI QR코드

DOI QR Code

고효율 플라즈마 디스플레이 패널을 위한 T-형 ITO 전극의 레이저 직접 패터닝시 레이저 스캔 속도의 영향

Effect of Laser Scanning Speed on the Laser Direct Patterning of T-shaped Indium Tin Oxide (ITO) Electrode for High Luminous AC Plasma Display Panels

  • 발행 : 2010.02.01

초록

Laser direct patterning is one of new methods which are able to replace a conventional photolithography. In order reduce the fabrication cost and to improve the luminous efficiency of AC plasma display panels (PDPs), in this experiment, a Q-switched Nd:$YVO_4$ laser was used to fabricate T-shaped indium tin oxide (ITO) display electrodes. For the laser beam scanning speed from 100 mm/sec to 800 mm/sec, T-shaped ITO patterns were clearly obtained and investigated. The experimental results showed that the optimized T-shaped ITO electrode was obtained when the lasers scanning speed was 300 mm/s.

키워드

참고문헌

  1. J. P. Boeuf, "Plasma display panels: physics, recent developments and key issues", J. Phys. D: Appl. Phys., Vol. 36, p. R53, 2003.
  2. J. P. Boeuf, C. Punset, A. Hirech, and H. Doyeux, "Physics and modeling of plasma display panels", J. Phys. IV France, Vol. 7, p. C4-3, 1997.
  3. O. B. Postel and M. A. Capelli, "Vacuum emission and breakdown characteristics of a planar He-Xe microdischarge", Appl. Phys. Lett., Vol. 76, p. 544, 2000. https://doi.org/10.1063/1.125813
  4. O. B. Postel and M. A. Capelli, "Parametric study of the vacuum ultraviolet emission and electrical characteristics of a He–Xe microdischarge", J. Appl. Phys., Vol. 89, p. 4719, 2001. https://doi.org/10.1063/1.1355696
  5. J. Meunier, P. Belenguer, and J. P. Boeuf, "Numerical model of an AC plasma display panel cell in neon-xenon mixtures", J. Appl. Phys., Vol. 78, p. 731, 1995. https://doi.org/10.1063/1.360684
  6. S. Venkat and C. Dunsky, "Laser patterning of ITO in flat panel display manufacturing", Proceedings of SPIE, p. 610602, 2006.
  7. J. H. Shin and C. H. Park, "Effects of the impurity gases on the characteristics of ac PDP", J. of KIEEME(in Korean) Vol. 15, No. 10, p. 909, 2002.
  8. Y. W. Jeong, J. M. Jeoung, and E. H. Choi, "Influence of sustain pulse-width on electrical characteristics and luminous efficiency in surface discharge of AC-PDP", Trans. Electr. Electron. Mater., Vol. 6, No. 6, p. 276, 2005. https://doi.org/10.4313/TEEM.2005.6.6.276
  9. K. H. Kim, S. J, Kwon, H. S. Mok, and T. O. Tak, "Direct patterning of silicon nitride thin film by projection photoablation for fabricating thin-film transistor liquid crystal displays", Jpn. J. Appl. Phys., Vol. 46, p. 4282, 2007. https://doi.org/10.1143/JJAP.46.4282
  10. K. H. Kim, S. J. Kwon, and T. O. Tak, "A study on removal of shoulders at laser ablated indium tin oxide film edge", Jpn. J. Appl. Phys., Vol. 47, p. 197, 2008. https://doi.org/10.1143/JJAP.47.197