참고문헌
- ABS, 2000. Guide for building and classing motor pleasure yachts, Chapter 8 "design pressures", Chaper 9 "hull scantling, high speed craft. Houston, TX, USA: American Bureau of Shipping.
- Adams, D. and Lewis, E., 1990. Influence of specimen gage length and loading method on the axial compressive strength of a unidirectional composite material. Experimental Mechanics, 31(1), pp. 14-21. https://doi.org/10.1007/BF02325717
- ASTM D2584 : Standard test method for Ignition loss of cured reinforced resins. ASTM International, West Conshohocken, PA, USA.
- ASTM D3039 : Standard test method for tensile properties of polymer matrix composite materials. ASTM International, West Conshohochen, PA, USA.
- ASTM D695 : Standard test method for compressive properties of rigid plastics. ASTM International, West, Conshohochen, PA, USA.
- Baley, C. Perrot Y. Davies, P. Bourmaud, A. and Grohens, Y., 2006. Mechanical properties of composites based on low styrene emission polyester resins for marine applications. Applied Composite Materials, 13, pp. 1-22. https://doi.org/10.1007/s10443-005-9000-9
- Belingardi, G. Cavatorta, M. and Paolino, D., 2008. repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates. International Journal of Impact Engineering, 35, pp.609-619. https://doi.org/10.1016/j.ijimpeng.2007.02.005
- Belingardi, G. Cavatorta, M. P. and Paolino, D. S., 2008. Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates. International Journal of Impact Engineering, 35, pp.609-619. https://doi.org/10.1016/j.ijimpeng.2007.02.005
- Borsellino, C. Calabrese, L. and Bella, G., 2007. Effect of bonder at skin/core interface on the mechanical performances of sandwich structures used in marine industry. Applied Composite Materials, 14, pp.307-323. https://doi.org/10.1007/s10443-007-9048-9
- Capello, F. and Manusco, A., 2001. Lay-up optimization for the hull of a racing sailing yacht. Advances in Engineering Software, 32, pp. 133-139. https://doi.org/10.1016/S0965-9978(00)00077-6
- Costa, M. L. Frascino, S. and Almeida, M. de, 2001. The influence of porosity on the interlaminar shear strength of carbon/epoxy and carbon/bismaleimide fabric laminates. Composites Science and Technology, 61(14), pp.2101-2108. https://doi.org/10.1016/S0266-3538(01)00157-9
- Fu, S.-Y. Lauke, B. Mader, E. Yue, C.-Y. and Hu, X., 2000. Tensile properties of short-glass-fiber- and short-carbonfiber-reinforced polypropylene composites, composites Part A: Applied Science and Manufacturing, 31(10), pp.1117-1125. https://doi.org/10.1016/S1359-835X(00)00068-3
- Horsmon, A., 2001. Lightweight composites for heavy-duty solutions. Marine Technology, 38 (2), pp.112-115.
- Mallick, P.K., 2007. Fiber reinforce composites: materials, manufacturing, and design. 3rd Edition, London, Great Britain: CRC Press, Taylor and Francis Group.
- Modi, D. Correia, N. Johnson, M. Long, A. Rudd, C. and Robitaille, F., 2007. Active control of the vacuum infusion process. composites Part A: Applied Science and Manufacturing, 38(5), pp.1271-1287. https://doi.org/10.1016/j.compositesa.2006.11.012
- Mouring, S., 1999. Buckling and postbuckling of composite ship panels stiffened with preform frames. Ocean Engineering, 26, pp.793-803. https://doi.org/10.1016/S0029-8018(98)00025-0
- Mouritz, A. Gellert, E. Burchill, P. and Challis, K., 2001. Review of advanced composite structures for naval ships and submarines. Composite Structures, 53(1), pp. 21-4. https://doi.org/10.1016/S0263-8223(00)00175-6
- Rodriguez, E. Petrucci, R. Puglia, D. Kenny, J. and Vazquez, A., 2005. Characterization of composites based on natural and glass fibers obtained by vacuum infusion. Journal of Composite Materials, 39(3), pp. 265-282. https://doi.org/10.1177/0021998305046450
- Schultheisz, C.R. and Waas, A.M., 1996. Compressive failure of composites, Part 1: testing and micro-mechanical theories. Progress in Aerospace Sciences, 32(1), pp.1-42. https://doi.org/10.1016/0376-0421(94)00002-3
- Squires, C. Netting, K. and Chambers, A., 2007. Understanding the factors affecting compressive testing of unidirectional carbon fiber composites. Composites Part B: Engineering, 38(4), pp.481-487. https://doi.org/10.1016/j.compositesb.2006.08.002
- Thomason, J.L., 1995. The Interface region in glass fiber reinforced epoxy resin composites: 1. Sample preparation, void content and interfacial strength. Composites, 26, pp.467-47. https://doi.org/10.1016/0010-4361(95)96804-F