DOI QR코드

DOI QR Code

Electric Arc Furnace Voltage Flicker Mitigation by Applying a Predictive Method with Closed Loop Control of the TCR/FC Compensator

  • Kiyoumarsi, Arash (Department of Electrical Engineering, Faculty of Engineering, University of Isfahan) ;
  • Ataei, Mohhamad (Department of Electrical Engineering, Faculty of Engineering, University of Isfahan) ;
  • Hooshmand, Rahmat-Allah (Department of Electrical Engineering, Faculty of Engineering, University of Isfahan) ;
  • Kolagar, Arash Dehestani (Department of Electrical Engineering, Faculty of Engineering, University of Isfahan)
  • 발행 : 2010.03.01

초록

Modeling of the three phase electric arc furnace and its voltage flicker mitigation are the purposes of this paper. For modeling of the electric arc furnace, at first, the arc is modeled by using current-voltage characteristic of a real arc. Then, the arc random characteristic has been taken into account by modulating the ac voltage via a band limited white noise. The electric arc furnace compensation with static VAr compensator, Thyristor Controlled Reactor combined with a Fixed Capacitor bank (TCR/FC), is discussed for closed loop control of the compensator. Instantaneous flicker sensation curves, before and after accomplishing compensation, are measured based on IEC standard. A new method for controlling TCR/FC compensator is proposed. This method is based on applying a predictive approach with closed loop control of the TCR/FC. In this method, by using the previous samples of the load reactive power, the future values of the load reactive power are predicted in order to consider the time delay in the compensator control. Also, in closed loop control, two different approaches are considered. The former is based on voltage regulation at the point of common coupling (PCC) and the later is based on enhancement of power factor at PCC. Finally, in order to show the effectiveness of the proposed methodology, the simulation results are provided.

키워드

참고문헌

  1. J. Jatskevich, O. Wasynczuk, L. Conrad, "A Method of Evaluating Flicker and Flicker-Reduction Strategies in Power System," IEEE Trans. Power Del., Vol. 13, No.4, Oct., 1998.
  2. A. Garcia-Cerrada, P. Garcia-Gonzalez, R. Collantes, T. Gomez, J. Anzola, "Comparsion of Thyristor-Controlled Reactors and Voltage-Source Inverters for Compensation of Flicker Caused by Arc Furnaces," IEEE Trans. Power Del., Vol.15, No.4, Oct., 2000.
  3. Araceli Hernandez, Julio G. Mayordomo, Rafael Asensi, Luis F. Beites, "A New Frequency Domain Approach for Flicker Evaluation of Arc Furnace," IEEE Trans. Power Del., Vol.18, No.2, pp.631-638, Apr., 2003. https://doi.org/10.1109/TPWRD.2003.809733
  4. Steffen Prinz, Hermann Pietzsch, H. Kleinknecht Gmbh, "Optimal Control of Static VAr Compensators in Power Supply System with Electrical Arc Furnace," ISBN: 90-75815-08-5, EPE 2005-Dresden. https://doi.org/10.1109/EPE.2005.219506
  5. Srinivas Varadan, Elham B. Makram, Adly A. Girgis, "A New Time Domain Voltage Source Model for an Arc Furnace Using EMTP," IEEE Trans. Power Del., Vol.11, No.3, pp.1685-1691, Jul., 1996. https://doi.org/10.1109/61.517535
  6. J. J. Gutierrez, J. Ruiz, S. Ruiz de Gauna, "Linearity of the IEC Flickermeter Regarding Amplitude Variations of Rectangular Fluctuations," IEEE Trans. Power Del., Vol. 22, No.1, pp.729-731, Jan., 2007. https://doi.org/10.1109/TPWRD.2006.886767
  7. Jin-Lung Guan, Jyh-Cherng Gu, Chi-Jui Wu, "A Novel Method for Estimating Voltage Flicker," IEEE Trans. Power Del., Vol.20, No.1, pp.242-247, Jan., 2005. https://doi.org/10.1109/TPWRD.2004.837819
  8. O. Ozgun, A. Abur, "Flicker Study Using a Novel Arc Furnace Model," IEEE Trans. Power Del., Vol.17, No. 4, pp.1158-1163, Oct., 2002. https://doi.org/10.1109/TPWRD.2002.804013
  9. Chau-Shing Wang, Michael J. Devaney, "Incandescent Lamp Flicker Mitigation and Measurement," IEEE Transaction on Instrumentation and Measurement, Vol.53, No.4, pp.1028-1034, Aug., 2004. https://doi.org/10.1109/TIM.2004.831131
  10. J. Jatskevich, O. Wasynczuk, L. Conrad, "A Method of Evaluating Flicker and Flicker-Reduction Strategies in Power Systems," IEEE Trans. Power Del., Vol. 13, No.4, pp.1481-1487, Oct., 1998. https://doi.org/10.1109/61.714809
  11. G. Wiczynski, "Simple Model of Flickermeter Signal Chain for Deformed Modulating Signals", IEEE Transactions on Power Delivery, Vol. 23, No. 4, October 2008.
  12. A. Hernandez, Julio G. Mayordomo, Rafael Asensi, Luis F. Beites, "A Method Based on Interharmonics for Flicker Propagation Applied to Arc Furnaces," IEEE Trans. Power Del., Vol.20, No.3, pp.2334-3442, Jul., 2005. https://doi.org/10.1109/TPWRD.2005.848677
  13. T. J. E. Miller, Reactive Power Control in Electrical Systems. New York: Wiley, 1982.
  14. Fei-feng Ji, Muhammad Mansoor Khan, Chen Chen, "Static Var Compensator Based on Rolling Synchronous Symmetrical Component Method for Unbalance Three-Phase System," Under Project "Power System Dynamic Analysis with Power Electronic Equipment" (No. 20030248043)., pp.621-626, 2005. https://doi.org/10.1109/ICIT.2005.1600712
  15. J. Dixon, L. Moran, J. Rodriguez, R. Domke, "Reactive Power Compensation Technologies, State-of-the-Art Review," Invited Paper. https://doi.org/10.1109/JPROC.2005.859937
  16. M. Cao, P. P. Biringer, "Minimizing the Three-Phase Unbalance in an Electric Arc Furnace," IEEE Transaction on Magnetics, Vol.25, No.4, pp.2849-2851, Jul., 1989. https://doi.org/10.1109/20.34303
  17. L. Cristaldi, A. Ferrero, G. Superti-Furga, "Current Decomposition in Asymmetrical, Unbalanced Three- Phase Systems Under Nonsinusoidal Conditions," IEEE Transactions on Instrumentation and Measurement, Vol.43, No.1, pp.63-68, Feb., 1994. https://doi.org/10.1109/19.286356
  18. A. Ferrero, G. Superti-Furga, "A new Approach to the Definition of Power Components in Three Phase Systems Under Nonsinusoidal Conditions," IEEE Transaction on Instrumentation and Measurement, Vol.40, No. 3, pp.568-577, Jun., 1991. https://doi.org/10.1109/19.87021
  19. Leszek S. Czarnecki, "Reactive and Unbalanced Currents Compensation in Three-Phase Asymmetrical Circuits under Nonsinusoidal Conditions," IEEE Transaction on Instrumentation and Measurement, Vol.38, No.3, pp.754-759, Jun., 1989. https://doi.org/10.1109/19.32187
  20. B. Lin, Y. Lee, "Three-phase Power Quality Compensator Under the Unbalanced Source and Nonlinear Loads," IEEE Transaction on Industrial Electronics, Vol.51, No.5, pp.1009-1017, Oct., 2004. https://doi.org/10.1109/TIE.2004.834960
  21. Mahesh K. Mishra, Arindom Ghosh, Avinash Joshi, Hiralal M. Suryawanshi, "A Novel Method of Load Compensation Under Unbalanced and Distorted Voltages," IEEE Trans. Power Del., Vol.22, No.1, pp.288-295, Jan., 2007. https://doi.org/10.1109/TPWRD.2006.881579
  22. Patrico Salmeron, Reyes S. Herrera, "Distorted and Unbalanced Systems Compensation Within Instantaneous Reactive Power Framework," IEEE Trans. Power Del., Vol.21, No.3, pp.1655-1662, Jul., 2006. https://doi.org/10.1109/TPWRD.2006.874115
  23. H. Samet, M. Parniani, "Predictive Method for Improving SVC Speed in Electric Arc Furnace Compensation," IEEE Trans. Power Del., Vol.22, No.1, pp. 732-734, Jan., 2007. https://doi.org/10.1109/TPWRD.2006.886768

피인용 문헌

  1. Power Quality Early Warning Based on Anomaly Detection vol.9, pp.4, 2014, https://doi.org/10.5370/JEET.2014.9.4.1171