참고문헌
- J.M. Jimenez-Martinez & all, "A new approach for teaching power electronics converter experiments," IEEE Trans. Education, Vol. 48, No. 3, pp. 513 - 519, Aug. 2005. https://doi.org/10.1109/TE.2005.852598
- V. Giri, "A pedagogically effective structured introduction to electrical energy systems with coupled laboratory experiences," IEEE Trans.Power Systems, Vol. 19, No. 1, pp. 129-138, Feb. 2004. https://doi.org/10.1109/TPWRS.2003.821018
- N. Mohan et all, "Restructuring of first courses in power electronics and electric drives that integrates digital control," IEEE Trans. Power Electronics, Vol. 18, No. 1, pp. 429-437, Jan. 2003. https://doi.org/10.1109/TPEL.2002.807120
- A. L. Gelen, S. Ayasun, "Realization of power electronic converter based DC motor speed control methods using MATLAB/Simulink," Int. Journal on Engineering Education, Vol. 25, No. 1, pp. 33-41, 2009.
- O.A. Mohammed, N.Y.Abed, S.C. Ganu, "Real-time simulations of electrical machine drives with hardware-in-the-loop," in Proc. IEEE Power Engineering Society General Meeting, pp. 1-6, 2007.
- J. Choi, M. Hyungsoo, "Simulation based power electronics education in Korea," in Proc. Power Conversion Conf.(PCC.2007), pp. 491-495, 2007.
- W. Kiing-Ing, K.A. Silek, "Integration of brushless DC motor drive into undergraduate electric machinery courses," in Proc. IEEE Int. Conf. ELearning in Ind. Electronics( ICELIE '09), pp. 69-73, 2009.
- F. Zeiger, M. Schmidt, K. Schilling, "Remote experiments with mobilerobot hardware via internet at limited link capacity," IEEE Trans. Industrial Electronics, Vol. 56, No.12, pp; 4798-4805, Dec. 2009. https://doi.org/10.1109/TIE.2009.2027898
- E. R. Collins, "An energy conversion laboratory using industrial-grade equipment," IEEE Trans. Power Systems, Vol. 24, No. 1, pp. 3-11, Feb. 2009. https://doi.org/10.1109/TPEL.2008.2011380
- L. Max et all, "Power electronics design laboratory exercise for finalyear M.Sc. students," IEEE Trans. Education, Vol. 52. No. 4, pp. 524- 531, Nov. 2009. https://doi.org/10.1109/TE.2008.930513
- R. H. Chu, middlenameD. middlenameD. C. Lu, S. Sathiakumar, "Project-based lab teaching for power electronics and drives," IEEE Trans. Education, Vol. 51, No. 1, pp. 108-113, Feb. 2008. https://doi.org/10.1109/TE.2007.906607
- E. Mese, "Project-oriented adjustable speed motor drive course for undergraduate curricula," IEEE Trans. Education, Vol. 49, No. 2, pp. 236-246, May 2006. https://doi.org/10.1109/TE.2006.872405
- R. S. Balog,et all, "Modern laboratory-based education for power electronics and electric machines," IEEE Trans. Power Systems, Vol. 20, No. 2, pp. 538- 547, May 2005. https://doi.org/10.1109/TPWRS.2005.846237
- T. Friedli, S. D. Round, J. W. Kolar, "Modeling the space elevator – A project oriented approach for teaching experimental power electronics," in Proc. European Conf. on Power Electronics and Applications(EPE 2007), pp. 1-10, 2007.
- K. Vardar, T. Surgevil, E. Akpnar, "Rapid prototyping applications on three-phase PWM rectifier and shunt active power filter," in Proc. Int. Conference on Electrical and Electronics Engineering(ELECO'2009), pp. I-258 - I-262, 2009.
- B. Tamyurek, A. Ceyhan, E. Birdane, F. Keles, "A simple DSP based control system design for a three-phase high power factor boost rectifier," in Proc. IEEE Applied Power Electronics Conference and Exposition( APEC 2008), pp. 1416-1422, 2008.
- R. Duma, p. Dobra, M. Abrudean, D. Petreus, "DSP based controller for battery charging system," in Proc. IEEE Int. Conference on Automation, Quality and Testing, Robotics, AQTR'2008, Vol. 2, pp. 70-74, 2008.
- R. Duma, P. Dobra, M. Abrudean, M. Dobra, "Rapid prototyping of control systems using embedded target for TI C2000 DSP," in Proc. Mediterranean Conf. on Control & Automation, Jul. 2007.
- S.Krishnamurthy, V.V.Sastry, V.Ajjarapu, "An innovative rapid prototyping tool for power electronic circuits," in Proc. The 2003 American Society for Engineering Education Annual Conference & Exposition, 2003.
- S. Chi, Z. Zhang, L. Xu, "Sliding-mode sensorless control of directdrive PM synchronous motors for washing machine applications," IEEE Trans. Industry Applications, Vol. 45, No. 2, pp. 582 – 590, Mar./Apr. 2009. https://doi.org/10.1109/TIA.2009.2013545
- A. A. Adam & all, "Steering DTC algorithm for IPMSM used in electrical vehicle (EV)- with fast response and minimum torque ripple," in Proc. IEEE Int. Workshop on Advanced Motion Control( AMC'2010), pp.279-283, 2010.
- J. Goetz, H. Weiping, J. Milliken, "Sensorless digital motor controller for high reliability applications," in Proc. IEEE Applied Power Electronics Conference and Exposition(APEC'06), p.6, 2006.
- M. Flueckiger, M. Bullo, Y. Perriard, "Sensorless speed control of traveling wave ultrasonic motor," in Proc. IEEE Industry Applications Conference(IAS'2006), Vol. 5, pp. 2488-2495, 2006.
- J. Sungyoon, L. Beomseok, N. Kwanghee, "PMSM control based on edge field measurements by Hall sensors," in Proc. IEEE Applied Power Electronics Conference & Exposition( APEC'2010), pp. 2002-2006, 2010.
- A, Lidozzi,L. Solero, F. Crescimbini, A. Di Napoli, "SVM PMSM drive with low resolution hall-effect sensors," IEEE Trans. Power Electronics, Vol. 22, No. 1, pp. 282-290, Jan. 2007. https://doi.org/10.1109/TPEL.2006.886603
- F. G. Capponi & all, "AC brushless drive with low-resolution halleffect sensors for surface-mounted PM machines," IEEE Trans. Industry Application, Vol. 42, No. 2, pp. 525-535, Mar./Apr. 2006.